[PATCH v4] usb/mtu3: power down device ip at setup

From: Hsin-Yi, Wang
Date: Wed Nov 28 2018 - 22:16:36 EST


Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip,
so host ip sleep will fail at ssusb_host_disable.

Power down device ip at ssusb_host_setup.

Signed-off-by: Hsin-Yi, Wang <hsinyi@xxxxxxxxxxxx>
---
ChangeLog:
V3->V4:
*update comment
---
drivers/usb/mtu3/mtu3_plat.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 46551f6d16fd..e086630e41a9 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -200,6 +200,14 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
udelay(1);
mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
+
+ /*
+ * device ip may be powered on in firmware/BROM stage before entering
+ * kernel stage;
+ * power down device ip, otherwise ip-sleep will fail when working as
+ * host only mode
+ */
+ mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
}

/* ignore the error if the clock does not exist */
--
2.18.1