Re: [PATCH 1/2] ARM: copypage-fa: add kto and kfrom to input operands list

From: Stefan Agner
Date: Tue Oct 16 2018 - 17:59:30 EST


On 16.10.2018 22:43, Nicolas Pitre wrote:
> On Tue, 16 Oct 2018, Russell King - ARM Linux wrote:
>
>> On Tue, Oct 16, 2018 at 10:00:19AM +0200, Linus Walleij wrote:
>> > On Tue, Oct 16, 2018 at 12:16 AM Stefan Agner <stefan@xxxxxxxx> wrote:
>> >
>> > > When functions incoming parameters are not in input operands list gcc
>> > > 4.5 does not load the parameters into registers before calling this
>> > > function but the inline assembly assumes valid addresses inside this
>> > > function. This breaks the code because r0 and r1 are invalid when
>> > > execution enters v4wb_copy_user_page ()
>> > >
>> > > Also the constant needs to be used as third input operand so account
>> > > for that as well.
>> > >
>> > > This fixes copypage-fa.c what has previously done before for the other
>> > > copypage implementations in commit 9a40ac86152c ("ARM: 6164/1: Add kto
>> > > and kfrom to input operands list.").
>> > >
>> > > Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
>> >
>> > Please add:
>> > Cc: stable@xxxxxxxxxxxxxxx
>>
>> It's not obvious yet whether this is right - it contradicts the GCC
>> manual, but then we have evidence that it's required for some GCC
>> versions where GCC may clone the function, or if the function is
>> used within the same file.
>
> Why not getting rid of __naked altogether? Here's what I suggest:
>
> ----- >8
> Subject: [PATCH] ARM: remove naked function usage
>
> Convert page copy functions not to rely on the naked function attribute.
>
> This attribute is known to confuse some gcc versions when function
> arguments aren't explicitly listed as inline assembly operands despite
> the gcc documentation. That resulted in commit 9a40ac86152c ("ARM:
> 6164/1: Add kto and kfrom to input operands list.").
>
> Yet that commit has problems of its own by having assembly operand
> constraints completely wrong. If the generated code has been OK since
> then, it is due to luck rather than correctness. So this patch provides
> proper assembly operand usage, and removes two instances of redundant
> register duplications in the implementation while at it.
>
> Inspection of the generated code with this patch doesn't show any obvious
> quality degradation either, so not relying on __naked at all will make
> the code less fragile, and more likely to be compilable with clang.
>
> The only remaining __naked instances (excluding the kprobes test cases)
> are exynos_pm_power_up_setup() and tc2_pm_power_up_setup(). But in those
> cases only the function address is used by the compiler with no chance of
> inlining it by mistake.

Tested using Qemu mainstone and versatileab (pxa_defconfig-CONFIG_FTRACE
and versatile_defconfig) compiled with Clang 7.0. Both configuration
compile and boot fine.

So from that perspective:

Tested-by: Stefan Agner <stefan@xxxxxxxx>

--
Stefan

>
> Signed-off-by: Nicolas Pitre <nico@xxxxxxxxxx>
> ---
> arch/arm/mm/copypage-fa.c | 34 ++++++------
> arch/arm/mm/copypage-feroceon.c | 97 +++++++++++++++++------------------
> arch/arm/mm/copypage-v4mc.c | 18 +++----
> arch/arm/mm/copypage-v4wb.c | 40 +++++++--------
> arch/arm/mm/copypage-v4wt.c | 36 ++++++-------
> arch/arm/mm/copypage-xsc3.c | 70 +++++++++++--------------
> arch/arm/mm/copypage-xscale.c | 70 ++++++++++++-------------
> 7 files changed, 171 insertions(+), 194 deletions(-)
>
> diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c
> index d130a5ece5..453a3341ca 100644
> --- a/arch/arm/mm/copypage-fa.c
> +++ b/arch/arm/mm/copypage-fa.c
> @@ -17,26 +17,24 @@
> /*
> * Faraday optimised copy_user_page
> */
> -static void __naked
> -fa_copy_user_page(void *kto, const void *kfrom)
> +static void fa_copy_user_page(void *kto, const void *kfrom)
> {
> - asm("\
> - stmfd sp!, {r4, lr} @ 2\n\
> - mov r2, %0 @ 1\n\
> -1: ldmia r1!, {r3, r4, ip, lr} @ 4\n\
> - stmia r0, {r3, r4, ip, lr} @ 4\n\
> - mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\
> - add r0, r0, #16 @ 1\n\
> - ldmia r1!, {r3, r4, ip, lr} @ 4\n\
> - stmia r0, {r3, r4, ip, lr} @ 4\n\
> - mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\
> - add r0, r0, #16 @ 1\n\
> - subs r2, r2, #1 @ 1\n\
> + int tmp;
> + asm volatile ("\
> +1: ldmia %1!, {r3, r4, ip, lr} @ 4\n\
> + stmia %0, {r3, r4, ip, lr} @ 4\n\
> + mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\
> + add %0, %0, #16 @ 1\n\
> + ldmia %1!, {r3, r4, ip, lr} @ 4\n\
> + stmia %0, {r3, r4, ip, lr} @ 4\n\
> + mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\
> + add %0, %0, #16 @ 1\n\
> + subs %2, %2, #1 @ 1\n\
> bne 1b @ 1\n\
> - mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB\n\
> - ldmfd sp!, {r4, pc} @ 3"
> - :
> - : "I" (PAGE_SIZE / 32));
> + mcr p15, 0, %2, c7, c10, 4 @ 1 drain WB"
> + : "+&r" (kto), "+&r" (kfrom), "=&r" "tmp)
> + : "2" (PAGE_SIZE / 32)
> + : "r3", "r4", "ip", "lr");
> }
>
> void fa_copy_user_highpage(struct page *to, struct page *from,
> diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
> index 49ee0c1a72..1349430c63 100644
> --- a/arch/arm/mm/copypage-feroceon.c
> +++ b/arch/arm/mm/copypage-feroceon.c
> @@ -13,58 +13,55 @@
> #include <linux/init.h>
> #include <linux/highmem.h>
>
> -static void __naked
> -feroceon_copy_user_page(void *kto, const void *kfrom)
> +static void feroceon_copy_user_page(void *kto, const void *kfrom)
> {
> - asm("\
> - stmfd sp!, {r4-r9, lr} \n\
> - mov ip, %2 \n\
> -1: mov lr, r1 \n\
> - ldmia r1!, {r2 - r9} \n\
> - pld [lr, #32] \n\
> - pld [lr, #64] \n\
> - pld [lr, #96] \n\
> - pld [lr, #128] \n\
> - pld [lr, #160] \n\
> - pld [lr, #192] \n\
> - pld [lr, #224] \n\
> - stmia r0, {r2 - r9} \n\
> - ldmia r1!, {r2 - r9} \n\
> - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
> - add r0, r0, #32 \n\
> - stmia r0, {r2 - r9} \n\
> - ldmia r1!, {r2 - r9} \n\
> - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
> - add r0, r0, #32 \n\
> - stmia r0, {r2 - r9} \n\
> - ldmia r1!, {r2 - r9} \n\
> - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
> - add r0, r0, #32 \n\
> - stmia r0, {r2 - r9} \n\
> - ldmia r1!, {r2 - r9} \n\
> - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
> - add r0, r0, #32 \n\
> - stmia r0, {r2 - r9} \n\
> - ldmia r1!, {r2 - r9} \n\
> - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
> - add r0, r0, #32 \n\
> - stmia r0, {r2 - r9} \n\
> - ldmia r1!, {r2 - r9} \n\
> - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
> - add r0, r0, #32 \n\
> - stmia r0, {r2 - r9} \n\
> - ldmia r1!, {r2 - r9} \n\
> - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
> - add r0, r0, #32 \n\
> - stmia r0, {r2 - r9} \n\
> - subs ip, ip, #(32 * 8) \n\
> - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\
> - add r0, r0, #32 \n\
> + int tmp;
> + asm volatile ("\
> +1: ldmia %1!, {r2 - r7, ip, lr} \n\
> + pld [%1, #0] \n\
> + pld [%1, #32] \n\
> + pld [%1, #64] \n\
> + pld [%1, #96] \n\
> + pld [%1, #128] \n\
> + pld [%1, #160] \n\
> + pld [%1, #192] \n\
> + stmia %0, {r2 - r7, ip, lr} \n\
> + ldmia %1!, {r2 - r7, ip, lr} \n\
> + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\
> + add %0, %0, #32 \n\
> + stmia %0, {r2 - r7, ip, lr} \n\
> + ldmia %1!, {r2 - r7, ip, lr} \n\
> + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\
> + add %0, %0, #32 \n\
> + stmia %0, {r2 - r7, ip, lr} \n\
> + ldmia %1!, {r2 - r7, ip, lr} \n\
> + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\
> + add %0, %0, #32 \n\
> + stmia %0, {r2 - r7, ip, lr} \n\
> + ldmia %1!, {r2 - r7, ip, lr} \n\
> + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\
> + add %0, %0, #32 \n\
> + stmia %0, {r2 - r7, ip, lr} \n\
> + ldmia %1!, {r2 - r7, ip, lr} \n\
> + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\
> + add %0, %0, #32 \n\
> + stmia %0, {r2 - r7, ip, lr} \n\
> + ldmia %1!, {r2 - r7, ip, lr} \n\
> + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\
> + add %0, %0, #32 \n\
> + stmia %0, {r2 - r7, ip, lr} \n\
> + ldmia %1!, {r2 - r7, ip, lr} \n\
> + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\
> + add %0, %0, #32 \n\
> + stmia %0, {r2 - r7, ip, lr} \n\
> + subs %2, %2, #(32 * 8) \n\
> + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\
> + add %0, %0, #32 \n\
> bne 1b \n\
> - mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\
> - ldmfd sp!, {r4-r9, pc}"
> - :
> - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
> + mcr p15, 0, %2, c7, c10, 4 @ drain WB"
> + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
> + : =2" (PAGE_SIZE),
> + : "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr");
> }
>
> void feroceon_copy_user_highpage(struct page *to, struct page *from,
> diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
> index 0224416cba..494ddc435a 100644
> --- a/arch/arm/mm/copypage-v4mc.c
> +++ b/arch/arm/mm/copypage-v4mc.c
> @@ -40,12 +40,10 @@ static DEFINE_RAW_SPINLOCK(minicache_lock);
> * instruction. If your processor does not supply this, you have to write your
> * own copy_user_highpage that does the right thing.
> */
> -static void __naked
> -mc_copy_user_page(void *from, void *to)
> +static void mc_copy_user_page(void *from, void *to)
> {
> - asm volatile(
> - "stmfd sp!, {r4, lr} @ 2\n\
> - mov r4, %2 @ 1\n\
> + int tmp;
> + asm volatile ("\
> ldmia %0!, {r2, r3, ip, lr} @ 4\n\
> 1: mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\
> stmia %1!, {r2, r3, ip, lr} @ 4\n\
> @@ -55,13 +53,13 @@ mc_copy_user_page(void *from, void *to)
> mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\
> stmia %1!, {r2, r3, ip, lr} @ 4\n\
> ldmia %0!, {r2, r3, ip, lr} @ 4\n\
> - subs r4, r4, #1 @ 1\n\
> + subs %2, %2, #1 @ 1\n\
> stmia %1!, {r2, r3, ip, lr} @ 4\n\
> ldmneia %0!, {r2, r3, ip, lr} @ 4\n\
> - bne 1b @ 1\n\
> - ldmfd sp!, {r4, pc} @ 3"
> - :
> - : "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
> + bne 1b @ "
> + : "+&r" (from), "+&r" (to), "=&r" (tmp)
> + : "2" (PAGE_SIZE / 64)
> + : "r2", "r3", "ip", "lr");
> }
>
> void v4_mc_copy_user_highpage(struct page *to, struct page *from,
> diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
> index 067d0fdd63..cf064ac6fc 100644
> --- a/arch/arm/mm/copypage-v4wb.c
> +++ b/arch/arm/mm/copypage-v4wb.c
> @@ -22,29 +22,27 @@
> * instruction. If your processor does not supply this, you have to write your
> * own copy_user_highpage that does the right thing.
> */
> -static void __naked
> -v4wb_copy_user_page(void *kto, const void *kfrom)
> +static void v4wb_copy_user_page(void *kto, const void *kfrom)
> {
> - asm("\
> - stmfd sp!, {r4, lr} @ 2\n\
> - mov r2, %2 @ 1\n\
> - ldmia r1!, {r3, r4, ip, lr} @ 4\n\
> -1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
> - stmia r0!, {r3, r4, ip, lr} @ 4\n\
> - ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\
> - stmia r0!, {r3, r4, ip, lr} @ 4\n\
> - ldmia r1!, {r3, r4, ip, lr} @ 4\n\
> - mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
> - stmia r0!, {r3, r4, ip, lr} @ 4\n\
> - ldmia r1!, {r3, r4, ip, lr} @ 4\n\
> - subs r2, r2, #1 @ 1\n\
> - stmia r0!, {r3, r4, ip, lr} @ 4\n\
> - ldmneia r1!, {r3, r4, ip, lr} @ 4\n\
> + int tmp;
> + asm volatile ("\
> + ldmia %1!, {r3, r4, ip, lr} @ 4\n\
> +1: mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\
> + stmia %0!, {r3, r4, ip, lr} @ 4\n\
> + ldmia %1!, {r3, r4, ip, lr} @ 4+1\n\
> + stmia %0!, {r3, r4, ip, lr} @ 4\n\
> + ldmia %1!, {r3, r4, ip, lr} @ 4\n\
> + mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\
> + stmia %0!, {r3, r4, ip, lr} @ 4\n\
> + ldmia %1!, {r3, r4, ip, lr} @ 4\n\
> + subs %2, %2, #1 @ 1\n\
> + stmia %0!, {r3, r4, ip, lr} @ 4\n\
> + ldmneia %1!, {r3, r4, ip, lr} @ 4\n\
> bne 1b @ 1\n\
> - mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\
> - ldmfd sp!, {r4, pc} @ 3"
> - :
> - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
> + mcr p15, 0, %1, c7, c10, 4 @ 1 drain WB"
> + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
> + : "2" (PAGE_SIZE / 64)
> + : "r3", "r4", "ip", "lr");
> }
>
> void v4wb_copy_user_highpage(struct page *to, struct page *from,
> diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
> index b85c5da2e5..66745bd3a6 100644
> --- a/arch/arm/mm/copypage-v4wt.c
> +++ b/arch/arm/mm/copypage-v4wt.c
> @@ -20,27 +20,25 @@
> * dirty data in the cache. However, we do have to ensure that
> * subsequent reads are up to date.
> */
> -static void __naked
> -v4wt_copy_user_page(void *kto, const void *kfrom)
> +static void v4wt_copy_user_page(void *kto, const void *kfrom)
> {
> - asm("\
> - stmfd sp!, {r4, lr} @ 2\n\
> - mov r2, %2 @ 1\n\
> - ldmia r1!, {r3, r4, ip, lr} @ 4\n\
> -1: stmia r0!, {r3, r4, ip, lr} @ 4\n\
> - ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\
> - stmia r0!, {r3, r4, ip, lr} @ 4\n\
> - ldmia r1!, {r3, r4, ip, lr} @ 4\n\
> - stmia r0!, {r3, r4, ip, lr} @ 4\n\
> - ldmia r1!, {r3, r4, ip, lr} @ 4\n\
> - subs r2, r2, #1 @ 1\n\
> - stmia r0!, {r3, r4, ip, lr} @ 4\n\
> - ldmneia r1!, {r3, r4, ip, lr} @ 4\n\
> + int tmp;
> + asm volatile ("\
> + ldmia %1!, {r3, r4, ip, lr} @ 4\n\
> +1: stmia %0!, {r3, r4, ip, lr} @ 4\n\
> + ldmia %1!, {r3, r4, ip, lr} @ 4+1\n\
> + stmia %0!, {r3, r4, ip, lr} @ 4\n\
> + ldmia %1!, {r3, r4, ip, lr} @ 4\n\
> + stmia %0!, {r3, r4, ip, lr} @ 4\n\
> + ldmia %1!, {r3, r4, ip, lr} @ 4\n\
> + subs %2, %2, #1 @ 1\n\
> + stmia %0!, {r3, r4, ip, lr} @ 4\n\
> + ldmneia %1!, {r3, r4, ip, lr} @ 4\n\
> bne 1b @ 1\n\
> - mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\
> - ldmfd sp!, {r4, pc} @ 3"
> - :
> - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
> + mcr p15, 0, %2, c7, c7, 0 @ flush ID cache"
> + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
> + : "2" (PAGE_SIZE / 64)
> + : "r3", "r4", "ip", "lr");
> }
>
> void v4wt_copy_user_highpage(struct page *to, struct page *from,
> diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
> index 03a2042ace..727a02c149 100644
> --- a/arch/arm/mm/copypage-xsc3.c
> +++ b/arch/arm/mm/copypage-xsc3.c
> @@ -21,53 +21,45 @@
>
> /*
> * XSC3 optimised copy_user_highpage
> - * r0 = destination
> - * r1 = source
> *
> * The source page may have some clean entries in the cache already, but we
> * can safely ignore them - break_cow() will flush them out of the cache
> * if we eventually end up using our copied page.
> *
> */
> -static void __naked
> -xsc3_mc_copy_user_page(void *kto, const void *kfrom)
> +static void xsc3_mc_copy_user_page(void *kto, const void *kfrom)
> {
> - asm("\
> - stmfd sp!, {r4, r5, lr} \n\
> - mov lr, %2 \n\
> - \n\
> - pld [r1, #0] \n\
> - pld [r1, #32] \n\
> -1: pld [r1, #64] \n\
> - pld [r1, #96] \n\
> + int tmp;
> + asm volatile ("\
> + pld [%1, #0] \n\
> + pld [%1, #32] \n\
> +1: pld [%1, #64] \n\
> + pld [%1, #96] \n\
> \n\
> -2: ldrd r2, [r1], #8 \n\
> - mov ip, r0 \n\
> - ldrd r4, [r1], #8 \n\
> - mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\
> - strd r2, [r0], #8 \n\
> - ldrd r2, [r1], #8 \n\
> - strd r4, [r0], #8 \n\
> - ldrd r4, [r1], #8 \n\
> - strd r2, [r0], #8 \n\
> - strd r4, [r0], #8 \n\
> - ldrd r2, [r1], #8 \n\
> - mov ip, r0 \n\
> - ldrd r4, [r1], #8 \n\
> - mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\
> - strd r2, [r0], #8 \n\
> - ldrd r2, [r1], #8 \n\
> - subs lr, lr, #1 \n\
> - strd r4, [r0], #8 \n\
> - ldrd r4, [r1], #8 \n\
> - strd r2, [r0], #8 \n\
> - strd r4, [r0], #8 \n\
> +2: ldrd r2, [%1], #8 \n\
> + ldrd r4, [%1], #8 \n\
> + mcr p15, 0, %0, c7, c6, 1 @ invalidate\n\
> + strd r2, [%0], #8 \n\
> + ldrd r2, [%1], #8 \n\
> + strd r4, [%0], #8 \n\
> + ldrd r4, [%1], #8 \n\
> + strd r2, [%0], #8 \n\
> + strd r4, [%0], #8 \n\
> + ldrd r2, [%1], #8 \n\
> + ldrd r4, [%1], #8 \n\
> + mcr p15, 0, %0, c7, c6, 1 @ invalidate\n\
> + strd r2, [%0], #8 \n\
> + ldrd r2, [%1], #8 \n\
> + subs %2, %2, #1 \n\
> + strd r4, [%0], #8 \n\
> + ldrd r4, [%1], #8 \n\
> + strd r2, [%0], #8 \n\
> + strd r4, [%0], #8 \n\
> bgt 1b \n\
> - beq 2b \n\
> - \n\
> - ldmfd sp!, {r4, r5, pc}"
> - :
> - : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
> + beq 2b "
> + : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
> + : "2" (PAGE_SIZE / 64 - 1)
> + : "r2", "r3", "r4", "r5");
> }
>
> void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
> @@ -85,8 +77,6 @@ void xsc3_mc_copy_user_highpage(struct page *to,
> struct page *from,
>
> /*
> * XScale optimised clear_user_page
> - * r0 = destination
> - * r1 = virtual user address of ultimate destination page
> */
> void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
> {
> diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
> index 97972379f4..fa0be66082 100644
> --- a/arch/arm/mm/copypage-xscale.c
> +++ b/arch/arm/mm/copypage-xscale.c
> @@ -36,52 +36,50 @@ static DEFINE_RAW_SPINLOCK(minicache_lock);
> * Dcache aliasing issue. The writes will be forwarded to the write buffer,
> * and merged as appropriate.
> */
> -static void __naked
> -mc_copy_user_page(void *from, void *to)
> +static void mc_copy_user_page(void *from, void *to)
> {
> + int tmp;
> /*
> * Strangely enough, best performance is achieved
> * when prefetching destination as well. (NP)
> */
> - asm volatile(
> - "stmfd sp!, {r4, r5, lr} \n\
> - mov lr, %2 \n\
> - pld [r0, #0] \n\
> - pld [r0, #32] \n\
> - pld [r1, #0] \n\
> - pld [r1, #32] \n\
> -1: pld [r0, #64] \n\
> - pld [r0, #96] \n\
> - pld [r1, #64] \n\
> - pld [r1, #96] \n\
> -2: ldrd r2, [r0], #8 \n\
> - ldrd r4, [r0], #8 \n\
> - mov ip, r1 \n\
> - strd r2, [r1], #8 \n\
> - ldrd r2, [r0], #8 \n\
> - strd r4, [r1], #8 \n\
> - ldrd r4, [r0], #8 \n\
> - strd r2, [r1], #8 \n\
> - strd r4, [r1], #8 \n\
> + asm volatile ("\
> + pld [%0, #0] \n\
> + pld [%0, #32] \n\
> + pld [%1, #0] \n\
> + pld [%1, #32] \n\
> +1: pld [%0, #64] \n\
> + pld [%0, #96] \n\
> + pld [%1, #64] \n\
> + pld [%1, #96] \n\
> +2: ldrd r2, [%0], #8 \n\
> + ldrd r4, [%0], #8 \n\
> + mov ip, %1 \n\
> + strd r2, [%1], #8 \n\
> + ldrd r2, [%0], #8 \n\
> + strd r4, [%1], #8 \n\
> + ldrd r4, [%0], #8 \n\
> + strd r2, [%1], #8 \n\
> + strd r4, [%1], #8 \n\
> mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\
> - ldrd r2, [r0], #8 \n\
> + ldrd r2, [%0], #8 \n\
> mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\
> - ldrd r4, [r0], #8 \n\
> - mov ip, r1 \n\
> - strd r2, [r1], #8 \n\
> - ldrd r2, [r0], #8 \n\
> - strd r4, [r1], #8 \n\
> - ldrd r4, [r0], #8 \n\
> - strd r2, [r1], #8 \n\
> - strd r4, [r1], #8 \n\
> + ldrd r4, [%0], #8 \n\
> + mov ip, %1 \n\
> + strd r2, [%1], #8 \n\
> + ldrd r2, [%0], #8 \n\
> + strd r4, [%1], #8 \n\
> + ldrd r4, [%0], #8 \n\
> + strd r2, [%1], #8 \n\
> + strd r4, [%1], #8 \n\
> mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\
> - subs lr, lr, #1 \n\
> + subs %2, %2, #1 \n\
> mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\
> bgt 1b \n\
> - beq 2b \n\
> - ldmfd sp!, {r4, r5, pc} "
> - :
> - : "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1));
> + beq 2b "
> + : "+&r" (from), "+&r" (to), "=&r" (tmp)
> + : "2" (PAGE_SIZE / 64 - 1)
> + : "r2", "r3", "r4", "r5", "ip");
> }
>
> void xscale_mc_copy_user_highpage(struct page *to, struct page *from,