Re: [PATCH 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe Phy controller

From: Rob Herring
Date: Tue Aug 14 2018 - 18:51:03 EST


On Tue, Aug 14, 2018 at 02:12:13AM -0400, Hanjie Lin wrote:
> From: Yue Wang <yue.wang@xxxxxxxxxxx>

Subject should be "dt-bindings: phy: ..."

> The Meson-PCIE-PHY controller supports the 5-Gbps data rate
> of the PCI Express Gen 2 specification and is backwardcompatible

space ^

> with the 2.5-Gbps Gen 1.1 specification with only
> inferred idle detection supported on AMLOGIC SoCs.

AMLOGIC or Amlogic?

>
> Signed-off-by: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
> Signed-off-by: Yue Wang <yue.wang@xxxxxxxxxxx>
> ---
> .../bindings/phy/amlogic,meson-pcie-phy.txt | 31 ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-pcie-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-pcie-phy.txt b/Documentation/devicetree/bindings/phy/amlogic,meson-pcie-phy.txt
> new file mode 100644
> index 0000000..db99085
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-pcie-phy.txt
> @@ -0,0 +1,31 @@
> +* Amlogic Meson AXG PCIE PHY binding
> +
> +Required properties:
> +- compatible: Should be
> + - "amlogic,axg-pcie-phy"
> +- #phys-cells: must be 0 (see phy-bindings.txt in this directory)

You don't need to distinguish port A and B?

> +- reg: The base address and length of the registers
> +- resets: phandle to the reset lines
> +- reset-names: must contain "phy" and "peripheral"
> + - "port_a" Port A reset
> + - "port_b" Port B reset
> + - "phy" PHY reset
> + - "apb" APB reset
> +Optional properties:
> +- phy-supply: see phy-bindings.txt in this directory
> +
> +Example:
> + pcie_phy: pcie-phy@ff644000 {
> + #phy-cells = <0>;
> + compatible = "amlogic,axg-pcie-phy";
> + reg = <0x0 0xff644000 0x0 0x2000>;
> + resets = <&reset RESET_PCIE_A>,
> + <&reset RESET_PCIE_B>,
> + <&reset RESET_PCIE_PHY>,
> + <&reset RESET_PCIE_APB>;
> + reset-names =
> + "port_a",
> + "port_b",
> + "phy",
> + "apb";
> + };
> --
> 2.7.4
>