Re: [PATCH v2] drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" links

[David Miller]

From: Alexandru Gagniuc <alex.g@xxxxxxxxxxxx>
Date: Tue,  6 Dec 2016 10:56:51 -0800

> Support for setting the RGMII_IDMODE bit was added in the commit
> referenced below. However, that commit did not add the symmetrical
> clearing of the bit by way of setting it in "mask". Add it here.
> 
> Note that the documentation marks clearing this bit as "reserved",
> however, according to TI, support for delaying the clock does exist in
> the MAC, although it is not officially supported.
> We tested this on a board with an RGMII to RGMII link that will not
> work unless this bit is cleared.
> 
> Fixes: 0fb26c3063ea ("drivers: net: cpsw-phy-sel: add support to configure rgmii internal delay")
> Signed-off-by: Alexandru Gagniuc <alex.g@xxxxxxxxxxxx>

Applied.