[PATCH 01/13] scpi: Add vendor_send_message to enable access to vendor commands

From: Neil Armstrong
Date: Thu Aug 18 2016 - 06:14:12 EST


Adds an optional vendor_send_message to the scpi to enable sending
vendor platform specific commands to the SCP firmware.

Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
drivers/firmware/arm_scpi.c | 26 +++++++++++++++++++++++---
include/linux/scpi_protocol.h | 4 ++++
2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 4388937..403783a 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -46,6 +46,8 @@

#define CMD_ID_SHIFT 0
#define CMD_ID_MASK 0x7f
+#define CMD_SET_SHIFT 7
+#define CMD_SET_MASK 0x1
#define CMD_TOKEN_ID_SHIFT 8
#define CMD_TOKEN_ID_MASK 0xff
#define CMD_DATA_SIZE_SHIFT 16
@@ -53,6 +55,10 @@
#define PACK_SCPI_CMD(cmd_id, tx_sz) \
((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \
(((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT))
+#define PACK_EXT_SCPI_CMD(cmd_id, tx_sz) \
+ ((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \
+ (CMD_SET_MASK << CMD_SET_SHIFT) | \
+ (((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT))
#define ADD_SCPI_TOKEN(cmd, token) \
((cmd) |= (((token) & CMD_TOKEN_ID_MASK) << CMD_TOKEN_ID_SHIFT))

@@ -344,8 +350,8 @@ static void put_scpi_xfer(struct scpi_xfer *t, struct scpi_chan *ch)
mutex_unlock(&ch->xfers_lock);
}

-static int scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len,
- void *rx_buf, unsigned int rx_len)
+static int __scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len,
+ void *rx_buf, unsigned int rx_len, bool extn)
{
int ret;
u8 chan;
@@ -360,7 +366,8 @@ static int scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len,
return -ENOMEM;

msg->slot = BIT(SCPI_SLOT);
- msg->cmd = PACK_SCPI_CMD(cmd, tx_len);
+ msg->cmd = extn ? PACK_EXT_SCPI_CMD(cmd, tx_len) :
+ PACK_SCPI_CMD(cmd, tx_len);
msg->tx_buf = tx_buf;
msg->tx_len = tx_len;
msg->rx_buf = rx_buf;
@@ -385,6 +392,18 @@ out:
return ret > 0 ? scpi_to_linux_errno(ret) : ret;
}

+static int scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len,
+ void *rx_buf, unsigned int rx_len)
+{
+ return __scpi_send_message(cmd, tx_buf, tx_len, rx_buf, rx_len, false);
+}
+
+static int scpi_ext_send_message(u8 cmd, void *tx_buf, unsigned int tx_len,
+ void *rx_buf, unsigned int rx_len)
+{
+ return __scpi_send_message(cmd, tx_buf, tx_len, rx_buf, rx_len, true);
+}
+
static u32 scpi_get_version(void)
{
return scpi_info->protocol_version;
@@ -578,6 +597,7 @@ static struct scpi_ops scpi_ops = {
.sensor_get_value = scpi_sensor_get_value,
.device_get_power_state = scpi_device_get_power_state,
.device_set_power_state = scpi_device_set_power_state,
+ .vendor_send_message = scpi_ext_send_message,
};

struct scpi_ops *get_scpi_ops(void)
diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h
index dc5f989..2b68581 100644
--- a/include/linux/scpi_protocol.h
+++ b/include/linux/scpi_protocol.h
@@ -58,6 +58,8 @@ struct scpi_sensor_info {
* OPP is an index to the list return by @dvfs_get_info
* @dvfs_get_info: returns the DVFS capabilities of the given power
* domain. It includes the OPP list and the latency information
+ * @vendor_send_message: vendor specific message sending, arg can specify
+ * a scpi implementation specific argument
*/
struct scpi_ops {
u32 (*get_version)(void);
@@ -72,6 +74,8 @@ struct scpi_ops {
int (*sensor_get_value)(u16, u64 *);
int (*device_get_power_state)(u16);
int (*device_set_power_state)(u16, u8);
+ int (*vendor_send_message)(u8 cmd, void *tx_buf, unsigned int tx_len,
+ void *rx_buf, unsigned int rx_len);
};

#if IS_REACHABLE(CONFIG_ARM_SCPI_PROTOCOL)
--
1.9.1