Re: [PATCH] tools: hv: kvp_daemon: make IPv6-only-injection work

From: Vitaly Kuznetsov
Date: Wed Dec 10 2014 - 05:49:44 EST


Dexuan Cui <decui@xxxxxxxxxxxxx> writes:

>> -----Original Message-----
>> From: Vitaly Kuznetsov [mailto:vkuznets@xxxxxxxxxx]
>> Sent: Tuesday, December 9, 2014 21:06 PM
>> To: Dexuan Cui
>> Cc: gregkh@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; driverdev-
>> devel@xxxxxxxxxxxxxxxxxxxxxx; olaf@xxxxxxxxx; apw@xxxxxxxxxxxxx;
>> jasowang@xxxxxxxxxx; KY Srinivasan; Haiyang Zhang
>> Subject: Re: [PATCH] tools: hv: kvp_daemon: make IPv6-only-injection work
>> ......
>> > + * Here "dhcp_enabled" is only for IPv4 according to Hyper-V host
>> team.
>> > + *
>> > + * In the case the host only injects 1 IPv6 address:
>> > + * new_val->dhcp_enabled is true, but we can't pass
>> BOOTPROTO=dhcp to
>> > + * the script hv_set_ifconfig, because in some distros (like RHEL7)
>> > + * BOOTPROTO=dhcp has a special meaning in the config file (e.g.,
>> > + * /etc/sysconfig/network-scripts/ifcfg-eth0): the network init
>> program
>> > + * ignores any static IP addr information once there is
>> > + * BOOTPROTO=dhcp; as a result, IPv6-only injection can't work.
>> > + *
>> > + * In the case of IPv6-only injection, BOOTPROTO=dhcp doesn't affect
>> > + * Ubuntu because it's ignored by the Ubuntu version of
>> > + * hv_set_ifconfig and it doesn't seem to have special meaning in
>> > + * Ubuntu.
>> > + */
>>
>> I just checked and adding "IPV6ADDR=something" when "BOOTPROTO=dhcp"
>> works for me with both RHEL7 and Fedora21.
> It doesn't work in my side. :-(
> Running 'ifup eth0' shows some errors(I use "set -x")
> ...
> + /sbin/dhclient -H localhost -1 -q -lf /var/lib/dhclient/dhclient--eth0.lease -pf /var/run/dhclient-eth0.pid eth0
> grep: /etc/sysconfig/network-scripts/ifcfg-eth0: Permission dinied.
> grep: /etc/sysconfig/network-scripts/ifcfg-eth0: Permission dinied.
> grep: /etc/sysconfig/network-scripts/ifcfg-eth0: Permission dinied.
> grep: /etc/sysconfig/network-scripts/ifcfg-eth0: Permission dinied.
> grep: /etc/sysconfig/network-scripts/ifcfg-eth0: Permission dinied.
> grep: /etc/sysconfig/network-scripts/ifcfg-eth0: Permission dinied.
> done.
>
> I'm trying to find out the cause.

Selinux? You can try 'setenforce 0' to figure this out.

>
>> Other than that I think bringing distribution specifics into kernel.git
>> is not a good idea. /etc/sysconfig/network-scripts/ifcfg-* format is
>> distro-specific and not all Linux distros support it. Moreover,
> I agree.
>
>> different distros can treat setting differently. I think it was wrong to
>> stick to this format in kvp daemon from very beginning.
> We can also think the current format used in kvp daemon is already
> distro-agnostic -- it just happens to look like the style of network config file
> used in RHEL :-)

Yes, it is already there and I don't see any point in changing it.

>
>>
>> As a solution I would suggest doing the following: kvp daemon writes all
>> received request details in distro-agnostic format in some temporary
>> place and then calls distro-specific script to set things up. Actually,
>> we already have such script: tools/hv/hv_set_ifconfig.sh
> Yeah, this is exactly what we already have today.
>
>> As for this bug I propose the following: remove skipping all
>> IPADDR/MASK/... settings in case of "BOOTPROTO=dhcp" and let
>> distro-specific script deal with the rest.
>> --
>> Vitaly
> OK, so the patch would be 1-line only:
>
> diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
> index 22b0764..53fdaad 100644
> --- a/tools/hv/hv_kvp_daemon.c
> +++ b/tools/hv/hv_kvp_daemon.c
> @@ -1314,10 +1314,8 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
> goto setval_error;
>
> /*
> - * We are done!.
> + * We are not done... TODO: add comment here.
> */
> - goto setval_done;
> -
> } else {
> error = kvp_write_file(file, "BOOTPROTO", "", "none");
> if (error)
>
> I'll send out a v2 after I resolve the "grep ... Permission dinied" issue.
>
> Thanks,
> -- Dexuan

--
Vitaly
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/