RE: [PATCH 3/4] usb: dwc2: add compatible data for rockchip soc

[Paul Zimmerman]

> From: Kever Yang [mailto:kever.yang@xxxxxxxxxxxxxx]
> Sent: Tuesday, July 29, 2014 6:35 PM
> 
> This patch add compatible data for dwc2 controller found on
> rk3066, rk3188 and rk3288 processors from rockchip.
> 
> Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
> ---
>  drivers/usb/dwc2/platform.c |   29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index a10e7a3..cc5983c 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -75,6 +75,34 @@ static const struct dwc2_core_params params_bcm2835 = {
>  	.uframe_sched			= 0,
>  };
> 
> +static const struct dwc2_core_params params_rk3066 = {
> +	.otg_cap			= 2,	/* no HNP/SRP capable */
> +	.otg_ver			= 0,	/* 1.3 */
> +	.dma_enable			= 1,
> +	.dma_desc_enable		= 0,
> +	.speed				= 0,	/* High Speed */
> +	.enable_dynamic_fifo		= 1,
> +	.en_multiple_tx_fifo		= 1,
> +	.host_rx_fifo_size		= 520,	/* 520 DWORDs */
> +	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
> +	.host_perio_tx_fifo_size	= 256,	/* 256 DWORDs */
> +	.max_transfer_size		= 65536,
> +	.max_packet_count		= 512,
> +	.host_channels			= 9,
> +	.phy_type			= 1,	/* UTMI */
> +	.phy_utmi_width			= 16,	/* 8 bits */

The comment doesn't match the value.

> +	.phy_ulpi_ddr			= 0,	/* Single */
> +	.phy_ulpi_ext_vbus		= 0,
> +	.i2c_enable			= 0,
> +	.ulpi_fs_ls			= 0,
> +	.host_support_fs_ls_low_power	= 0,
> +	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
> +	.ts_dline			= 0,
> +	.reload_ctl			= 1,
> +	.ahbcfg				= 0x17, /* dma enable &  INCR16 */

Don't set the dma enable bit here, the driver will set that bit
according to the '.dma_enable' member above.

-- 
Paul

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/