[PATCH 4/4] usb: dwc2: add dr_mode support for dwc2

From: Kever Yang
Date: Tue Jul 29 2014 - 21:36:07 EST


Some devices with A female host port and without use of usb_id pin
will need this for the otg controller works as device role
during firmware period and works as host role in rich os.

Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---
drivers/usb/dwc2/core.c | 13 +++++++++++++
drivers/usb/dwc2/core.h | 2 ++
drivers/usb/dwc2/platform.c | 4 ++++
3 files changed, 19 insertions(+)

diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 27d2c9b..6688951 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -118,6 +118,7 @@ static int dwc2_core_reset(struct dwc2_hsotg *hsotg)
{
u32 greset;
int count = 0;
+ u32 gusbcfg;

dev_vdbg(hsotg->dev, "%s()\n", __func__);

@@ -148,6 +149,18 @@ static int dwc2_core_reset(struct dwc2_hsotg *hsotg)
}
} while (greset & GRSTCTL_CSFTRST);

+ if (hsotg->dr_mode == USB_DR_MODE_HOST) {
+ gusbcfg = readl(hsotg->regs+GUSBCFG);
+ gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
+ gusbcfg |= GUSBCFG_FORCEHOSTMODE;
+ writel(gusbcfg, hsotg->regs+GUSBCFG);
+ } else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
+ gusbcfg = readl(hsotg->regs+GUSBCFG);
+ gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+ gusbcfg |= GUSBCFG_FORCEDEVMODE;
+ writel(gusbcfg, hsotg->regs+GUSBCFG);
+ }
+
/*
* NOTE: This long sleep is _very_ important, otherwise the core will
* not stay in host mode after a connector ID change!
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 1efd10c..9fe960b 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -501,6 +501,7 @@ struct dwc2_hw_params {
* a_peripheral and b_device=>b_host) this may not match
* the core, but allows the software to determine
* transitions
+ * @dr_mode: requested mode of operation
* @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
* transfer are in process of being queued
* @srp_success: Stores status of SRP request in the case of a FS PHY
@@ -592,6 +593,7 @@ struct dwc2_hsotg {
/** Params to actually use */
struct dwc2_core_params *core_params;
enum usb_otg_state op_state;
+ enum usb_dr_mode dr_mode;

unsigned int queuing_high_bandwidth:1;
unsigned int srp_success:1;
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index cc5983c..a2ac1ea 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -42,6 +42,8 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>

+#include <linux/usb/of.h>
+
#include "core.h"
#include "hcd.h"

@@ -200,6 +202,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
(unsigned long)res->start, hsotg->regs);

+ hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
+
retval = dwc2_hcd_init(hsotg, irq, params);
if (retval)
return retval;
--
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/