[PATCH V2] net/dt: Add support for overriding phy configuration from device tree
From: Matthew Garrett
Date: Thu Jan 16 2014 - 09:47:25 EST
Some hardware may be broken in interesting and board-specific ways, such
that various bits of functionality don't work. This patch provides a
mechanism for overriding mii registers during init based on the contents of
the device tree data, allowing board-specific fixups without having to
pollute generic code.
Signed-off-by: Matthew Garrett <matthew.garrett@xxxxxxxxxx>
---
Documentation/devicetree/bindings/net/phy.txt | 21 +++++
drivers/net/phy/phy_device.c | 29 +++++-
drivers/of/of_net.c | 124 ++++++++++++++++++++++++++
include/linux/of_net.h | 12 +++
4 files changed, 185 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 7cd18fb..fc50f02 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -23,6 +23,21 @@ Optional Properties:
assume clause 22. The compatible list may also contain other
elements.
+The following properties may be added to either the phy node or the parent
+ethernet device. If not present, the hardware defaults will be used.
+
+- phy-mii-advertise-10half: 1 to advertise half-duplex 10MBit, 0 to disable
+- phy-mii-advertise-10full: 1 to advertise full-duplex 10MBit, 0 to disable
+- phy-mii-advertise-100half: 1 to advertise half-duplex 100MBit, 0 to disable
+- phy-mii-advertise-100full: 1 to advertise full-duplex 100MBit, 0 to disable
+- phy-mii-advertise-100base4: 1 to advertise 100base4, 0 to disable
+- phy-mii-advertise-1000half: 1 to advertise half-duplex 1000MBit, 0 to disable
+- phy-mii-advertise-1000full: 1 to advertise full-duplex 1000MBit, 0 to disable
+- phy-mii-manual-master: 1 to enable manual master/slave configuration, 0
+ to disable manual master/slave configuration
+- phy-mii-as-master: 1 to configure phy to act as master, 0 to configure phy
+ to act as slave. Ignored if manual master/slave configuration is not enabled.
+
Example:
ethernet-phy@0 {
@@ -32,4 +47,10 @@ ethernet-phy@0 {
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
+ // Disable advertising of full duplex 1000MBit
+ phy-mii-advertise-1000full = <0>;
+ // Force manual phy master/slave configuration
+ phy-mii-manual-master = <1>;
+ // Forcibly configure phy as slave
+ phy-mii-as-master = <0>;
};
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d6447b3..91793bc 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -33,6 +33,7 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/of_net.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -497,6 +498,28 @@ void phy_disconnect(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_disconnect);
+int phy_override_from_of(struct phy_device *phydev)
+{
+ int reg, regval;
+ u16 val, mask;
+
+ /* Check for phy register overrides from OF */
+ for (reg = 0; reg < 16; reg++) {
+ if (!of_get_mii_register(phydev, reg, &val, &mask)) {
+ if (!mask)
+ continue;
+ regval = phy_read(phydev, reg);
+ if (regval < 0)
+ continue;
+ regval &= ~mask;
+ regval |= val;
+ phy_write(phydev, reg, regval);
+ }
+ }
+
+ return 0;
+}
+
int phy_init_hw(struct phy_device *phydev)
{
int ret;
@@ -508,7 +531,11 @@ int phy_init_hw(struct phy_device *phydev)
if (ret < 0)
return ret;
- return phydev->drv->config_init(phydev);
+ ret = phydev->drv->config_init(phydev);
+ if (ret < 0)
+ return ret;
+
+ return phy_override_from_of(phydev);
}
/**
diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
index 8f9be2e..4545608 100644
--- a/drivers/of/of_net.c
+++ b/drivers/of/of_net.c
@@ -93,3 +93,127 @@ const void *of_get_mac_address(struct device_node *np)
return NULL;
}
EXPORT_SYMBOL(of_get_mac_address);
+
+/**
+ * Provide phy register overrides from the device tree. Some hardware may
+ * be broken in interesting and board-specific ways, so we want a mechanism
+ * for the board data to provide overrides for default values. This should be
+ * called during phy init.
+ */
+int of_get_mii_register(struct phy_device *phydev, int reg, u16 *val,
+ u16 *mask)
+{
+ u32 tmp;
+ struct device *dev = &phydev->dev;
+ struct device_node *np = dev->of_node;
+
+ *val = 0;
+ *mask = 0;
+
+ if (!np && dev->parent->of_node)
+ np = dev->parent->of_node;
+
+ if (!np)
+ return 0;
+
+ switch (reg) {
+ case MII_ADVERTISE:
+ if (!of_property_read_u32(np, "phy-mii-advertise-10half",
+ &tmp)) {
+ if (tmp) {
+ *val |= ADVERTISE_10HALF;
+ phydev->advertising |= SUPPORTED_10baseT_Half;
+ } else {
+ phydev->advertising &=
+ ~(SUPPORTED_10baseT_Half);
+ }
+
+ *mask |= ADVERTISE_10HALF;
+ }
+ if (!of_property_read_u32(np, "phy-mii-advertise-10full",
+ &tmp)) {
+ if (tmp) {
+ *val |= ADVERTISE_10FULL;
+ phydev->advertising |= SUPPORTED_10baseT_Full;
+ } else {
+ phydev->advertising &=
+ ~(SUPPORTED_10baseT_Full);
+ }
+
+ *mask |= ADVERTISE_10FULL;
+ }
+ if (!of_property_read_u32(np, "phy-mii-advertise-100half",
+ &tmp)) {
+ if (tmp) {
+ *val |= ADVERTISE_100HALF;
+ phydev->advertising |= SUPPORTED_100baseT_Half;
+ } else {
+ phydev->advertising &=
+ ~(SUPPORTED_100baseT_Half);
+ }
+
+ *mask |= ADVERTISE_100HALF;
+ }
+ if (!of_property_read_u32(np, "phy-mii-advertise-100full",
+ &tmp)) {
+ if (tmp) {
+ *val |= ADVERTISE_100FULL;
+ phydev->advertising |= SUPPORTED_100baseT_Full;
+ } else {
+ phydev->advertising &=
+ ~(SUPPORTED_100baseT_Full);
+ }
+
+ *mask |= ADVERTISE_100FULL;
+ }
+ if (!of_property_read_u32(np, "phy-mii-advertise-100base4",
+ &tmp)) {
+ if (tmp)
+ *val |= ADVERTISE_100BASE4;
+ *mask |= ADVERTISE_100BASE4;
+ }
+ break;
+ case MII_CTRL1000:
+ if (!of_property_read_u32(np, "phy-mii-advertise-1000full",
+ &tmp)) {
+ if (tmp) {
+ *val |= ADVERTISE_1000FULL;
+ phydev->advertising |= SUPPORTED_1000baseT_Full;
+ } else {
+ phydev->advertising &=
+ ~(SUPPORTED_1000baseT_Full);
+ }
+
+ *mask |= ADVERTISE_1000FULL;
+ }
+ if (!of_property_read_u32(np, "phy-mii-advertise-1000half",
+ &tmp)) {
+ if (tmp) {
+ *val |= ADVERTISE_1000HALF;
+ phydev->advertising |= SUPPORTED_1000baseT_Half;
+ } else {
+ phydev->advertising &=
+ ~(SUPPORTED_1000baseT_Half);
+ }
+
+ *mask |= ADVERTISE_1000HALF;
+ }
+ if (!of_property_read_u32(np, "phy-mii-as-master",
+ &tmp)) {
+ if (tmp)
+ *val |= CTL1000_AS_MASTER;
+ *mask |= CTL1000_AS_MASTER;
+ }
+ if (!of_property_read_u32(np, "phy-mii-manual-master",
+ &tmp)) {
+ if (tmp)
+ *val |= CTL1000_ENABLE_MASTER;
+ *mask |= CTL1000_ENABLE_MASTER;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(of_get_mii_register);
diff --git a/include/linux/of_net.h b/include/linux/of_net.h
index 34597c8..2e478bc 100644
--- a/include/linux/of_net.h
+++ b/include/linux/of_net.h
@@ -7,10 +7,14 @@
#ifndef __LINUX_OF_NET_H
#define __LINUX_OF_NET_H
+#include <linux/phy.h>
+
#ifdef CONFIG_OF_NET
#include <linux/of.h>
extern int of_get_phy_mode(struct device_node *np);
extern const void *of_get_mac_address(struct device_node *np);
+extern int of_get_mii_register(struct phy_device *np, int reg, u16 *val,
+ u16 *mask);
#else
static inline int of_get_phy_mode(struct device_node *np)
{
@@ -21,6 +25,14 @@ static inline const void *of_get_mac_address(struct device_node *np)
{
return NULL;
}
+static inline int of_get_mii_register(struct phy_device *np, int reg, u16 *val,
+ u16 *mask)
+{
+ *val = 0;
+ *mask = 0;
+
+ return -EINVAL;
+}
#endif
#endif /* __LINUX_OF_NET_H */
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/