Re: [PATCH v5] PWM: atmel-pwm: add PWM controller driver

From: Bo Shen
Date: Thu Oct 31 2013 - 01:31:55 EST

Hi Nicolas,

On 10/28/2013 10:49 PM, Nicolas Ferre wrote:
On 22/10/2013 12:13, Bo Shen :
Hi All,

On 10/8/2013 21:17, Thierry Reding wrote:
On Mon, Sep 30, 2013 at 05:10:40PM +0800, Bo Shen wrote:
Add Atmel PWM controller driver based on PWM framework.

This is the basic function implementation of Atmel PWM controller.
It can work with PWM based led and backlight.

Signed-off-by: Bo Shen <voice.shen@xxxxxxxxx>

Changes in v5:
- call clk_disable directly, if so, it won't cause more than one
enabled, the clock can not be disabled.

Changes in v4:
- check the return value of clk_prepare()
- change channel register size as constant

Changes in v3:
- change compatible string from "atmel,sama5-pwm" to
- Add PWM led example in binding documentation
- Using micro replace hard code

Changes in v2:
- Address the comments from Thierry Reding

.../devicetree/bindings/pwm/atmel-pwm.txt | 41 +++
drivers/pwm/Kconfig | 9 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-atmel.c | 344
4 files changed, 395 insertions(+)
create mode 100644
create mode 100644 drivers/pwm/pwm-atmel.c

I haven't seen an Acked-by from the device tree bindings maintainers on
this. I've Cc'ed them, so hopefully one of them has time to review.

Any comments?

As a recommendation from the recent Kernel Summit stated, you will have
to separate the binding itself from the driver and associated code.
Simply send the binding documentation to the DT maintainers but still
keep the two patches linked together in a series (but without putting DT
maintainers nor the DT mailing-list in CC of the non-documentation

This way you may have more chances to get feedback.

Thanks, I will split the binding document as a separate patch.

Thanks, bye,

Best Regards,
Bo Shen
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at
Please read the FAQ at