Re: [PATCH 19/20] iio: gyro-core: st: Clean up error handling inprobe()

[Jonathan Cameron]

On 09/16/13 17:02, Lee Jones wrote:
> Reduce the amount of those unnecessary goto calls, as in most cases
> we can simply return immediately. We also only call for the IRQ number
> once and use that value throughout.
> 
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Applied to the togreg branch of iio.git

Thanks,
> ---
>  drivers/iio/gyro/st_gyro_core.c | 19 ++++++++++---------
>  1 file changed, 10 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
> index e13c2b0..9f80817 100644
> --- a/drivers/iio/gyro/st_gyro_core.c
> +++ b/drivers/iio/gyro/st_gyro_core.c
> @@ -305,8 +305,9 @@ static const struct iio_trigger_ops st_gyro_trigger_ops = {
>  int st_gyro_common_probe(struct iio_dev *indio_dev,
>  					struct st_sensors_platform_data *pdata)
>  {
> -	int err;
>  	struct st_sensor_data *gdata = iio_priv(indio_dev);
> +	int irq = gdata->get_irq_data_ready(indio_dev);
> +	int err;
>  
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  	indio_dev->info = &gyro_info;
> @@ -314,7 +315,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev,
>  	err = st_sensors_check_device_support(indio_dev,
>  				ARRAY_SIZE(st_gyro_sensors), st_gyro_sensors);
>  	if (err < 0)
> -		goto st_gyro_common_probe_error;
> +		return err;
>  
>  	gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
>  	gdata->multiread_bit = gdata->sensor->multi_read_bit;
> @@ -327,12 +328,12 @@ int st_gyro_common_probe(struct iio_dev *indio_dev,
>  
>  	err = st_sensors_init_sensor(indio_dev, pdata);
>  	if (err < 0)
> -		goto st_gyro_common_probe_error;
> +		return err;
>  
> -	if (gdata->get_irq_data_ready(indio_dev) > 0) {
> +	if (irq > 0) {
>  		err = st_gyro_allocate_ring(indio_dev);
>  		if (err < 0)
> -			goto st_gyro_common_probe_error;
> +			return err;
>  
>  		err = st_sensors_allocate_trigger(indio_dev,
>  						  ST_GYRO_TRIGGER_OPS);
> @@ -344,15 +345,15 @@ int st_gyro_common_probe(struct iio_dev *indio_dev,
>  	if (err)
>  		goto st_gyro_device_register_error;
>  
> -	return err;
> +	return 0;
>  
>  st_gyro_device_register_error:
> -	if (gdata->get_irq_data_ready(indio_dev) > 0)
> +	if (irq > 0)
>  		st_sensors_deallocate_trigger(indio_dev);
>  st_gyro_probe_trigger_error:
> -	if (gdata->get_irq_data_ready(indio_dev) > 0)
> +	if (irq > 0)
>  		st_gyro_deallocate_ring(indio_dev);
> -st_gyro_common_probe_error:
> +
>  	return err;
>  }
>  EXPORT_SYMBOL(st_gyro_common_probe);
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/