Re: [PATCH 11/20] iio: sensors-core: st: Support sensors which don'thave a Data Ready pin

[Jonathan Cameron]

On 09/16/13 17:02, Lee Jones wrote:
> Not all ST's sensors support data ready, so let's make the declaration
> of one conditional.
> 
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Applied to the togreg branch of iio.git

Thanks Lee
> ---
>  drivers/iio/common/st_sensors/st_sensors_core.c | 33 ++++++++++++++++---------
>  drivers/iio/pressure/st_pressure_core.c         |  3 ++-
>  2 files changed, 24 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> index 793136a..2672630 100644
> --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> @@ -198,21 +198,17 @@ int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
>  }
>  EXPORT_SYMBOL(st_sensors_set_axis_enable);
>  
> -int st_sensors_init_sensor(struct iio_dev *indio_dev,
> -					struct st_sensors_platform_data *pdata)
> +int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
> +				struct st_sensors_platform_data *pdata)
>  {
> -	int err;
>  	struct st_sensor_data *sdata = iio_priv(indio_dev);
>  
> -	mutex_init(&sdata->tb.buf_lock);
> -
>  	switch (pdata->drdy_int_pin) {
>  	case 1:
>  		if (sdata->sensor->drdy_irq.mask_int1 == 0) {
>  			dev_err(&indio_dev->dev,
>  					"DRDY on INT1 not available.\n");
> -			err = -EINVAL;
> -			goto init_error;
> +			return -EINVAL;
>  		}
>  		sdata->drdy_int_pin = 1;
>  		break;
> @@ -220,17 +216,29 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
>  		if (sdata->sensor->drdy_irq.mask_int2 == 0) {
>  			dev_err(&indio_dev->dev,
>  					"DRDY on INT2 not available.\n");
> -			err = -EINVAL;
> -			goto init_error;
> +			return -EINVAL;
>  		}
>  		sdata->drdy_int_pin = 2;
>  		break;
>  	default:
>  		dev_err(&indio_dev->dev, "DRDY on pdata not valid.\n");
> -		err = -EINVAL;
> -		goto init_error;
> +		return -EINVAL;
>  	}
>  
> +	return 0;
> +}
> +
> +int st_sensors_init_sensor(struct iio_dev *indio_dev,
> +					struct st_sensors_platform_data *pdata)
> +{
> +	struct st_sensor_data *sdata = iio_priv(indio_dev);
> +	int err = 0;
> +
> +	mutex_init(&sdata->tb.buf_lock);
> +
> +	if (pdata)
> +		err = st_sensors_set_drdy_int_pin(indio_dev, pdata);
> +
>  	err = st_sensors_set_enable(indio_dev, false);
>  	if (err < 0)
>  		goto init_error;
> @@ -266,6 +274,9 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
>  	u8 drdy_mask;
>  	struct st_sensor_data *sdata = iio_priv(indio_dev);
>  
> +	if (!sdata->sensor->drdy_irq.addr)
> +		return 0;
> +
>  	/* Enable/Disable the interrupt generator 1. */
>  	if (sdata->sensor->drdy_irq.ig1.en_addr > 0) {
>  		err = st_sensors_write_data_with_mask(indio_dev,
> diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
> index 93bff9b..3abada2 100644
> --- a/drivers/iio/pressure/st_pressure_core.c
> +++ b/drivers/iio/pressure/st_pressure_core.c
> @@ -254,7 +254,8 @@ int st_press_common_probe(struct iio_dev *indio_dev,
>  
>  	pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
>  
> -	if (!plat_data)
> +	/* Some devices don't support a data ready pin. */
> +	if (!plat_data && pdata->sensor->drdy_irq.addr)
>  		plat_data =
>  			(struct st_sensors_platform_data *)&default_press_pdata;
>  
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/