[PATCH V2 1/5] regmap: add helper macro to set min/max range of register

[Laxman Dewangan]

Add helper macro to set the min and max value of the register range.

This is useful when initialising the register ranges of the device like

static const struct regmap_range readable_ranges[] = {
	regmap_reg_range(DEVICE_REG0, DEVICE_REG10),
};

Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
As per Mark's comment on V1 series, adding the macro in header in place
of defining in driver.
This should go on same tree as 2/5.

 include/linux/regmap.h |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 4c8c20a..047e8dc 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -70,6 +70,8 @@ struct regmap_range {
 	unsigned int range_max;
 };
 
+#define regmap_reg_range(low, high) { .range_min = low, .range_max = high, }
+
 /*
  * A table of ranges including some yes ranges and some no ranges.
  * If a register belongs to a no_range, the corresponding check function
-- 
1.7.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/