[PATCH 06/11] sched: Add NEED_RESCHED to the preempt_count

[Peter Zijlstra]

In order to combine the preemption and need_resched test we need to
fold the need_resched information into the preempt_count value.

Since the NEED_RESCHED flag is set across CPUs this needs to be an
atomic operation, however we very much want to avoid making
preempt_count atomic, therefore we keep the existing TIF_NEED_RESCHED
infrastructure in place but at 3 sites test it and fold its value into
preempt_count; namely:

 - resched_task() when setting TIF_NEED_RESCHED on the current task
 - scheduler_ipi() when resched_task() sets TIF_NEED_RESCHED on a
                   remote task it follows it up with a reschedule IPI
                   and we can modify the cpu local preempt_count from
                   there.
 - cpu_idle_loop() for when resched_task() found tsk_is_polling().

We use an inverted bitmask to indicate need_resched so that a 0 means
both need_resched and !atomic.

Also remove the barrier() in preempt_enable() between
preempt_enable_no_resched() and preempt_check_resched() to avoid
having to reload the preemption value and allow the compiler to use
the flags of the previuos decrement. I couldn't come up with any sane
reason for this barrier() to be there as preempt_enable_no_resched()
already has a barrier() before doing the decrement.

Suggested-by: Ingo Molnar <mingo@xxxxxxxxxx>
Signed-off-by: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
---
 include/linux/preempt.h   |   42 +++++++++++++++++++++++++++++++++++++-----
 include/linux/sched.h     |    2 +-
 kernel/context_tracking.c |    2 +-
 kernel/cpu/idle.c         |    7 +++++++
 kernel/sched/core.c       |   18 ++++++++++++++----
 5 files changed, 60 insertions(+), 11 deletions(-)

--- a/include/linux/preempt.h
+++ b/include/linux/preempt.h
@@ -10,9 +10,19 @@
 #include <linux/linkage.h>
 #include <linux/list.h>
 
+/*
+ * We use the MSB mostly because its available; see <linux/hardirq.h> for
+ * the other bits.
+ */
+#define PREEMPT_NEED_RESCHED	0x80000000
+
+/*
+ * We mask the PREEMPT_NEED_RESCHED bit so as not to confuse all current users
+ * that think a non-zero value indicates we cannot preempt.
+ */
 static __always_inline int preempt_count(void)
 {
-	return current_thread_info()->preempt_count;
+	return current_thread_info()->preempt_count & ~PREEMPT_NEED_RESCHED;
 }
 
 static __always_inline int *preempt_count_ptr(void)
@@ -20,6 +30,30 @@ static __always_inline int *preempt_coun
 	return &current_thread_info()->preempt_count;
 }
 
+/*
+ * We fold the NEED_RESCHED bit into the preempt count such that
+ * preempt_enable() can decrement and test for needing to reschedule with a
+ * single instruction.
+ *
+ * We invert the actual bit, so that when the decrement hits 0 we know we both
+ * need to resched (the bit is cleared) and can resched (no preempt count).
+ */
+
+static __always_inline void set_preempt_need_resched(void)
+{
+	*preempt_count_ptr() &= ~PREEMPT_NEED_RESCHED;
+}
+
+static __always_inline void clear_preempt_need_resched(void)
+{
+	*preempt_count_ptr() |= PREEMPT_NEED_RESCHED;
+}
+
+static __always_inline bool test_preempt_need_resched(void)
+{
+	return !(*preempt_count_ptr() & PREEMPT_NEED_RESCHED);
+}
+
 #if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
   extern void add_preempt_count(int val);
   extern void sub_preempt_count(int val);
@@ -37,7 +71,7 @@ asmlinkage void preempt_schedule(void);
 
 #define preempt_check_resched() \
 do { \
-	if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \
+	if (unlikely(!*preempt_count_ptr())) \
 		preempt_schedule(); \
 } while (0)
 
@@ -47,7 +81,7 @@ void preempt_schedule_context(void);
 
 #define preempt_check_resched_context() \
 do { \
-	if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \
+	if (unlikely(!*preempt_count_ptr())) \
 		preempt_schedule_context(); \
 } while (0)
 #else
@@ -83,7 +117,6 @@ do { \
 #define preempt_enable() \
 do { \
 	preempt_enable_no_resched(); \
-	barrier(); \
 	preempt_check_resched(); \
 } while (0)
 
@@ -111,7 +144,6 @@ do { \
 #define preempt_enable_notrace() \
 do { \
 	preempt_enable_no_resched_notrace(); \
-	barrier(); \
 	preempt_check_resched_context(); \
 } while (0)
 
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2408,7 +2408,7 @@ static inline int signal_pending_state(l
 
 static inline int need_resched(void)
 {
-	return unlikely(test_thread_flag(TIF_NEED_RESCHED));
+	return unlikely(test_preempt_need_resched());
 }
 
 /*
--- a/kernel/context_tracking.c
+++ b/kernel/context_tracking.c
@@ -115,7 +115,7 @@ void __sched notrace preempt_schedule_co
 {
 	enum ctx_state prev_ctx;
 
-	if (likely(!preemptible()))
+	if (likely(preempt_count() || irqs_disabled()))
 		return;
 
 	/*
--- a/kernel/cpu/idle.c
+++ b/kernel/cpu/idle.c
@@ -105,6 +105,13 @@ static void cpu_idle_loop(void)
 				__current_set_polling();
 			}
 			arch_cpu_idle_exit();
+			/*
+			 * We need to test and propagate the TIF_NEED_RESCHED
+			 * bit here because we might not have send the
+			 * reschedule IPI to idle tasks.
+			 */
+			if (tif_need_resched())
+				set_preempt_need_resched();
 		}
 		tick_nohz_idle_exit();
 		schedule_preempt_disabled();
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -525,8 +525,10 @@ void resched_task(struct task_struct *p)
 	set_tsk_need_resched(p);
 
 	cpu = task_cpu(p);
-	if (cpu == smp_processor_id())
+	if (cpu == smp_processor_id()) {
+		set_preempt_need_resched();
 		return;
+	}
 
 	/* NEED_RESCHED must be visible before we test polling */
 	smp_mb();
@@ -1397,6 +1399,14 @@ static void sched_ttwu_pending(void)
 
 void scheduler_ipi(void)
 {
+	/*
+	 * Fold TIF_NEED_RESCHED into the preempt_count; anybody setting
+	 * TIF_NEED_RESCHED remotely (for the first time) will also send
+	 * this IPI.
+	 */
+	if (tif_need_resched())
+		set_preempt_need_resched();
+
 	if (llist_empty(&this_rq()->wake_list)
 			&& !tick_nohz_full_cpu(smp_processor_id())
 			&& !got_nohz_idle_kick())
@@ -2431,6 +2441,7 @@ static void __sched __schedule(void)
 	put_prev_task(rq, prev);
 	next = pick_next_task(rq);
 	clear_tsk_need_resched(prev);
+	clear_preempt_need_resched();
 	rq->skip_clock_update = 0;
 
 	if (likely(prev != next)) {
@@ -2517,7 +2528,7 @@ asmlinkage void __sched notrace preempt_
 	 * If there is a non-zero preempt_count or interrupts are disabled,
 	 * we do not want to preempt the current task. Just return..
 	 */
-	if (likely(!preemptible()))
+	if (likely(preempt_count() || irqs_disabled()))
 		return;
 
 	do {
@@ -2542,11 +2553,10 @@ EXPORT_SYMBOL(preempt_schedule);
  */
 asmlinkage void __sched preempt_schedule_irq(void)
 {
-	struct thread_info *ti = current_thread_info();
 	enum ctx_state prev_state;
 
 	/* Catch callers which need to be fixed */
-	BUG_ON(ti->preempt_count || !irqs_disabled());
+	BUG_ON(preempt_count() || !irqs_disabled());
 
 	prev_state = exception_enter();
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/