Re: [PATCH v2 1/9] i2c: prepare runtime PM support for I2C clientdevices

[Mika Westerberg]

On Mon, Sep 16, 2013 at 03:46:16PM +0100, Graeme Gregory wrote:
> On Mon, Sep 16, 2013 at 05:38:12PM +0300, Mika Westerberg wrote:
> > On Mon, Sep 16, 2013 at 11:12:49AM +0100, Mark Brown wrote:
> > > That's definitely an ACPI specific (probably x86 specific ACPI?)
> > > requirement not a generic one, on some systems it would increase power
> > > consumption since the controller will need to sit on while the device is
> > > functioning autonomously.
> > 
> > Yes, the ACPI 5.0 spec says that the device cannot be in higher D-state
> > than its parent. This is not x86 specific, though I'm not sure if this is
> > implemented elsewhere.
> > 
> I do not think this stops the OS fine controlling the power of the device
> though. It is only a mechanism to make sure the tree of D states is vaguely
> sane from the ACPI point of view. What happens in each D state is never
> actually defined in the ACPI spec.

I think there's a pretty good definition of the D-states in chapter 2.3 of
the ACPI 5.0 spec.

In our case the problem is that the I2C controller is in D3Cold (off) and
we try to move the I2C client device to D0 (on) it violates the ACPI spec.

Anyway we are looking if we can somehow make this work in such way that it
doesn't prevent non-ACPI devices from functioning as they expect now.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/