[PATCH v2 12/24] Staging: winbond: reg: fourth of the patches that fixes lines over 80 characters
From: Iker Pedrosa
Date: Mon Sep 16 2013 - 09:47:40 EST
Fourth of the patches that fixes the lines over 80 characters in reg.c
Signed-off-by: Iker Pedrosa <ikerpedrosam@xxxxxxxxx>
---
drivers/staging/winbond/reg.c | 33 ++++++++++++++++++++++-----------
1 file changed, 22 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 6aae4da..6d2ab1e 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1187,46 +1187,57 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
/* ----- Calibration (3). RX baseband Gm-C filter auto-tuning */
/* Calibration (3a). turn off ENCAL signal */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x00<<24) | 0xFAEDC0, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
/* Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default;) */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x07<<24) | 0x0C68CE, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
/* Calibration (3b). send RX reset signal */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00401E, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x0F<<24) | 0x00401E, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
/* Calibration (3c). turn-on RX Gm-C filter auto-tuning */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFEEDC0, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x00<<24) | 0xFEEDC0, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
udelay(150); /* Sleep 150 us */
/* Calibration (3e). turn off ENCAL signal */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x00<<24) | 0xFAEDC0, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
/* ----- Calibration (4). TX LO leakage calibration */
/* Calibration (4a). TX LO leakage calibration */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFD6BC0, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x00<<24) | 0xFD6BC0, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
udelay(150); /* Sleep 150 us */
/* ----- Calibration (5). RX DC offset calibration */
/* Calibration (5a). turn off ENCAL signal and set to RX SW DC calibration mode */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x00<<24) | 0xFAEDC0, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
/* Calibration (5b). turn off AGC servo-loop & RSSI */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEBFFC2, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x01<<24) | 0xEBFFC2, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
/* for LNA=11 -------- */
/* Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111 */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x343FCC, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x06<<24) | 0x343FCC, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
/* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x00<<24) | 0xFF6DC0, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
usleep(2000);
/* Calibration (5f). turn off ENCAL signal */
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse((0x00<<24) | 0xFAEDC0, 24);
Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
/* for LNA=10 -------- */
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/