Re: [PATCH] extcon: palmas: Dont set USB state if ID pin is grounded

From: George Cherian
Date: Tue Sep 10 2013 - 07:58:12 EST


On 9/10/2013 2:47 PM, Laxman Dewangan wrote:
On Tuesday 10 September 2013 01:19 PM, George Cherian wrote:
In OMAP5 when USB-HOST is set true, the VBUS regulator is turned ON.
This causes a VBUS interrupt, ignore the same if we are already in
USB-HOST.

Signed-off-by: George Cherian <george.cherian@xxxxxx>
---
drivers/extcon/extcon-palmas.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 9672f31..91b31af 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -50,6 +50,9 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
struct palmas_usb *palmas_usb = _palmas_usb;
unsigned int vbus_line_state;
+ if (palmas_usb->linkstat == PALMAS_USB_STATE_ID)
+ return IRQ_HANDLED;
+

Should we really handle this on this extcon driver? I think it should be handled in the USB driver. If port is OTG type and if usb driver enable the VBUS then it can expect the VBUS available notification but based on the USB driver state, it should ignore this notification.

Correct extcon should just notify and the consumer should take appropriate decision.
Otherwise, Palmas pin find that there is VBUS state true but the SW status will show as the VBUS not there.



--
-George

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/