Re: [PATCH v2 4/4] mtd: gpmi: update the ecc step size for mtd_info{}

[Brian Norris]

On Wed, May 15, 2013 at 04:46:46PM +0800, Huang Shijie wrote:
> update the ecc step size when we have already get the right value.
> 
> Signed-off-by: Huang Shijie <b32955@xxxxxxxxxxxxx>
> ---
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 53180da..bc598e6 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -1598,6 +1598,7 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data  *this)
>  	/* Adjust the ECC strength according to the chip. */
>  	this->nand.ecc.strength = this->bch_geometry.ecc_strength;
>  	this->mtd.ecc_strength = this->bch_geometry.ecc_strength;
> +	this->mtd.ecc_step = this->bch_geometry.ecc_chunk_size;

Why do you need a special case here for gpmi-nand? GPMI should be
initializing nand_ecc_ctrl.size (this->ecc.size) to something meaningful
instead of directly setting to 1. Then nand_base will take care of
setting mtd.ecc_step.

Along the same line, you shouldn't need to directly override
mtd.ecc_strength here; you should be setting this->ecc.strength
appropriately.

I see several instances here where gpmi-nand is hacking around
nand_base, rather than using its intended infrastructure.

The right way seems to be to avoid nand_scan() directly but instead to
use nand_scan_ident() and nand_scan_tail() separately (that's what
they're exported for) so that you can initialize any geometry-related
options before nand_scan_tail() does the last steps.

In the end, you shouldn't be needing to override this->scan_bbt at all,
since you really intend to use the default implementation; you just are
doing this to hack around your issues. In fact, I think every use of
nand_default_bbt() outside of nand_base is a design mistake.

>  	this->mtd.bitflip_threshold = this->bch_geometry.ecc_strength;
>  
>  	/* NAND boot init, depends on the gpmi_set_geometry(). */
> 

Brian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/