Re: [PATCH 2/6] usb: phy: tegra: Fix wrong PHY parameters

[Stephen Warren]

On 07/31/2013 11:41 AM, Tuomas Tynkkynen wrote:
> Some of the PHY parameters are not set according to the TRMs:
> 
> - UTMIP_FS_PREABMLE_J should be set, not cleared
> - UTMIP_XCVR_LSBIAS_SEL should be cleared, not set
> - UTMIP_PD_CHRG should be set in host mode and cleared in device mode
> - UTMIP_XCVR_SETUP is a two-part field; the upper bits were not set

> diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c

>  #define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
> +#define   UTMIP_XCVR_SETUP_MSB(x)		((((x) & 0x7f) >> 4) << 22)

You may as well s/0x7f/0x70/ since the shift clears the 4 LSBs. I'm
pretty sure I mentioned this in downstream review. Perhaps check my
review comments to see if anything else was missed?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/