[PATCH v3 2/2] USB: ehci-omap: select NOP_USB_XCEIV PHY driver

From: Roger Quadros
Date: Fri Jun 14 2013 - 05:52:06 EST

ehci-omap needs NOP_USB_XCEIV PHY driver to function
properly, so select it. As the USB PHY drivers no longer
depend on USB_PHY, it is safe to select the PHY drivers.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Tested-by: Adrien Vergà <adrienverge@xxxxxxxxx>
drivers/usb/host/Kconfig | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 7ded784..48e1b70 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -150,13 +150,11 @@ config USB_EHCI_MXC
tristate "EHCI support for OMAP3 and later chips"
depends on ARCH_OMAP
+ select NOP_USB_XCEIV
default y
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
- If your system uses a PHY on the USB port, you will need to
- enable USB_PHY and the appropriate PHY driver as well. Most
- boards need the NOP_USB_XCEIV PHY driver.

tristate "Support for Marvell EBU on-chip EHCI USB controller"

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/