[PATCH v2 0/3] Zynq: Support more boards

From: Soren Brinkmann
Date: Wed Jun 12 2013 - 12:41:37 EST

This patch series adds support for the zc702 and zed Zynq platforms. The series
depends on armsoc/zynq/clk.
The third patch is a little tricky in terms of the compatibility strings used
since the Zed board is not a Xilinx product. I looked at the Digilent vendor
tree and they use 'xlnx,zynq-zed', so I decided to do the same here. But this
might be a subject for discussion.


- adding patch to remove board specific compat strings from the BSP
- adding patch adding Zed support

Soren Brinkmann (3):
arm: zynq: Remove board specific compatibility string
arm: dt: zynq: Add support for the zc706 platform
arm: dt: zynq: Add support for the zed platform

arch/arm/boot/dts/Makefile | 4 +++-
arch/arm/boot/dts/zynq-zc706.dts | 31 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/zynq-zed.dts | 31 +++++++++++++++++++++++++++++++
arch/arm/mach-zynq/common.c | 1 -
4 files changed, 65 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/zynq-zc706.dts
create mode 100644 arch/arm/boot/dts/zynq-zed.dts


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/