Re: PROBLEM: modprobe hang at startup (3.8.x, 3.9.x, IBM x3550)

[Robert Norris]

On Fri, May 17, 2013 at 10:36:22AM +0200, Jean Delvare wrote:
> IPMI is still likely to access the SMBus controller. If there's a BMC
> in the machine, it can also access the SMBus slave with its own
> controller. It would be good to rule this out by disabling IPMI
> completely, removing the BMC from the machine if it has one, and
> checking if it makes the issue go away or not.

This ended up being easier than I thought. The BMC can't be physically
removed, but there is a jumper on the board to disable it. We flipped it
and got a message during POST about it not being present. Additionally
all IPMI functions did nothing (hung, but interruptable) which is what
you'd expect. I think it really is disabled.

In this state, I re-ran the previous tests, with identical results. That
is:

- "modprobe i2c_i801" succeeds
- "modprobe i2c_i801 disable_features=0x10" succeeds
- With interrupts disabled, "modprobe ics932s401"
- With interrupts enabled, "modprobe ics932s401" hangs
- With interrupts enabled, "i2cget 4 0x50 0x00" hangs

I'll leave the BMC disabled for now in case that's important for further
testing. If you need other tests run with the BMC enabled, I'll use a
differen machine.

Cheers,
Rob.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/