Re: [PATCH] cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro

[Sascha Hauer]

Eric,

Any comment to this one? It looks like an obvious bugfix, but since this
is quite old and was never noticed I wonder if there's something else
wrong aswell?

Sascha

On Fri, Mar 22, 2013 at 01:15:02AM +0100, Paul Bolle wrote:
> Commit 2d66c7803595da0d4bcd949825d598575f5de9e6 ("cpuimx27 and mbimx27:
> allow fine control of UART4 and SDHC2 usage") added the Kconfig symbol
> MACH_EUKREA_CPUIMX27_USEUART4. But it forgot to prepend CONFIG_ to the
> use of its macro. Add that prefix now.
> 
> Signed-off-by: Paul Bolle <pebolle@xxxxxxxxxx>
> ---
> Untested. This needs testing, obviously. Or a rethink, because these
> typos have been in the tree since v2.6.36!
> 
>  arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 4 ++--
>  arch/arm/mach-imx/mach-cpuimx27.c            | 4 ++--
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
> index b4c7002..b2f08bf 100644
> --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
> +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
> @@ -46,7 +46,7 @@ static const int eukrea_mbimx27_pins[] __initconst = {
>  	PE10_PF_UART3_CTS,
>  	PE11_PF_UART3_RTS,
>  	/* UART4 */
> -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
> +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
>  	PB26_AF_UART4_RTS,
>  	PB28_AF_UART4_TXD,
>  	PB29_AF_UART4_CTS,
> @@ -306,7 +306,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
>  
>  	imx27_add_imx_uart1(&uart_pdata);
>  	imx27_add_imx_uart2(&uart_pdata);
> -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
> +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
>  	imx27_add_imx_uart3(&uart_pdata);
>  #endif
>  
> diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
> index 1465593..ea50870 100644
> --- a/arch/arm/mach-imx/mach-cpuimx27.c
> +++ b/arch/arm/mach-imx/mach-cpuimx27.c
> @@ -48,7 +48,7 @@ static const int eukrea_cpuimx27_pins[] __initconst = {
>  	PE14_PF_UART1_CTS,
>  	PE15_PF_UART1_RTS,
>  	/* UART4 */
> -#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
> +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
>  	PB26_AF_UART4_RTS,
>  	PB28_AF_UART4_TXD,
>  	PB29_AF_UART4_CTS,
> @@ -272,7 +272,7 @@ static void __init eukrea_cpuimx27_init(void)
>  	/* SDHC2 can be used for Wifi */
>  	imx27_add_mxc_mmc(1, NULL);
>  #endif
> -#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
> +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
>  	/* in which case UART4 is also used for Bluetooth */
>  	imx27_add_imx_uart3(&uart_pdata);
>  #endif
> -- 
> 1.7.11.7
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/