[PATCH 1/4] Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT"

From: Arnd Bergmann
Date: Fri Feb 15 2013 - 13:22:37 EST


This reverts commit f9965aa20706860077cfa093d04a6351c0c1e940.
---
arch/arm/boot/dts/spear1340.dtsi | 19 ----------
arch/arm/boot/dts/spear13xx.dtsi | 38 -------------------
arch/arm/mach-spear13xx/include/mach/spear.h | 2 +
arch/arm/mach-spear13xx/spear1310.c | 5 ++-
arch/arm/mach-spear13xx/spear1340.c | 33 ++++++++++++-----
arch/arm/mach-spear13xx/spear13xx.c | 55 ++++++++++++++++++++++++++--
6 files changed, 80 insertions(+), 72 deletions(-)

diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index b2d41b7..34da11a 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -88,25 +88,6 @@
status = "disabled";
};

- dma@ea800000 {
- slave_info {
- uart1_tx {
- bus_id = "uart1_tx";
- cfg_hi = <0x6000>; /* 0xC << 11 */
- cfg_lo = <0>;
- src_master = <0>;
- dst_master = <1>;
- };
- uart1_tx {
- bus_id = "uart1_tx";
- cfg_hi = <0x680>; /* 0xD << 7 */
- cfg_lo = <0>;
- src_master = <1>;
- dst_master = <0>;
- };
- };
- };
-
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 585f641..b4ca60f 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -105,37 +105,6 @@
reg = <0xea800000 0x1000>;
interrupts = <0 19 0x4>;
status = "disabled";
-
- nr_channels = <8>;
- chan_allocation_order = <1>;
- chan_priority = <1>;
- block_size = <0xfff>;
- nr_masters = <2>;
- data_width = <3 3 0 0>;
-
- slave_info {
- ssp0_tx {
- bus_id = "ssp0_tx";
- cfg_hi = <0x2000>; /* 0x4 << 11 */
- cfg_lo = <0>;
- src_master = <0>;
- dst_master = <0>;
- };
- ssp0_rx {
- bus_id = "ssp0_rx";
- cfg_hi = <0x280>; /* 0x5 << 7 */
- cfg_lo = <0>;
- src_master = <0>;
- dst_master = <0>;
- };
- cf {
- bus_id = "cf";
- cfg_hi = <0>;
- cfg_lo = <0>;
- src_master = <0>;
- dst_master = <0>;
- };
- };
};

dma@eb000000 {
@@ -143,13 +112,6 @@
reg = <0xeb000000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
-
- nr_channels = <8>;
- chan_allocation_order = <1>;
- chan_priority = <1>;
- block_size = <0xfff>;
- nr_masters = <2>;
- data_width = <3 3 0 0>;
};

fsmc: flash@b0000000 {
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
index 972a151..7cfa681 100644
--- a/arch/arm/mach-spear13xx/include/mach/spear.h
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -43,6 +43,8 @@
#define VA_L2CC_BASE IOMEM(UL(0xFB000000))

/* others */
+#define DMAC0_BASE UL(0xEA800000)
+#define DMAC1_BASE UL(0xEB000000)
#define MCIF_CF_BASE UL(0xB2800000)

/* Debug uart for linux, will be used for debug and uncompress messages */
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index ec72c47..02f4724 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -36,7 +36,7 @@
static struct arasan_cf_pdata cf_pdata = {
.cf_if_clk = CF_IF_CLK_166M,
.quirk = CF_BROKEN_UDMA,
- .dma_priv = "cf",
+ .dma_priv = &cf_dma_priv,
};

/* ssp device registration */
@@ -47,7 +47,10 @@ static struct pl022_ssp_controller ssp1_plat_data = {
/* Add SPEAr1310 auxdata to pass platform data */
static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_pdata),
+ OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+ OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
{}
};
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index 69c8f72..081014f 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -18,9 +18,9 @@
#include <linux/delay.h>
#include <linux/dw_dmac.h>
#include <linux/of_platform.h>
-#include <linux/pata_arasan_cf_data.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
+#include <mach/dma.h>
#include <mach/generic.h>
#include <mach/spear.h>

@@ -78,16 +78,26 @@
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(25))

-static struct amba_pl011_data uart1_data = {
- .dma_filter = dw_dma_generic_filter,
- .dma_tx_param = "uart1_tx",
- .dma_rx_param = "uart1_rx",
+static struct dw_dma_slave uart1_dma_param[] = {
+ {
+ /* Tx */
+ .cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
+ .cfg_lo = 0,
+ .src_master = DMA_MASTER_MEMORY,
+ .dst_master = SPEAR1340_DMA_MASTER_UART1,
+ }, {
+ /* Rx */
+ .cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
+ .cfg_lo = 0,
+ .src_master = SPEAR1340_DMA_MASTER_UART1,
+ .dst_master = DMA_MASTER_MEMORY,
+ }
};

-static struct arasan_cf_pdata cf_pdata = {
- .cf_if_clk = CF_IF_CLK_166M,
- .quirk = CF_BROKEN_UDMA,
- .dma_priv = "cf",
+static struct amba_pl011_data uart1_data = {
+ .dma_filter = dw_dma_filter,
+ .dma_tx_param = &uart1_dma_param[0],
+ .dma_rx_param = &uart1_dma_param[1],
};

/* SATA device registration */
@@ -148,8 +158,11 @@ static struct ahci_platform_data sata_pdata = {

/* Add SPEAr1340 auxdata to pass platform data */
static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_pdata),
+ OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+ OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+ OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
&sata_pdata),
OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index b074db8..c4af775 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -22,16 +22,63 @@
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/smp_twd.h>
+#include <mach/dma.h>
#include <mach/generic.h>
#include <mach/spear.h>

+/* common dw_dma filter routine to be used by peripherals */
+bool dw_dma_filter(struct dma_chan *chan, void *slave)
+{
+ struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
+
+ if (chan->device->dev == dws->dma_dev) {
+ chan->private = slave;
+ return true;
+ } else {
+ return false;
+ }
+}
+
/* ssp device registration */
+static struct dw_dma_slave ssp_dma_param[] = {
+ {
+ /* Tx */
+ .cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
+ .cfg_lo = 0,
+ .src_master = DMA_MASTER_MEMORY,
+ .dst_master = DMA_MASTER_SSP0,
+ }, {
+ /* Rx */
+ .cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
+ .cfg_lo = 0,
+ .src_master = DMA_MASTER_SSP0,
+ .dst_master = DMA_MASTER_MEMORY,
+ }
+};
+
struct pl022_ssp_controller pl022_plat_data = {
.enable_dma = 1,
- .dma_filter = dw_dma_generic_filter,
- .dma_rx_param = "ssp0_rx",
- .dma_tx_param = "ssp0_tx",
- .num_chipselect = 3,
+ .dma_filter = dw_dma_filter,
+ .dma_rx_param = &ssp_dma_param[1],
+ .dma_tx_param = &ssp_dma_param[0],
+};
+
+/* CF device registration */
+struct dw_dma_slave cf_dma_priv = {
+ .cfg_hi = 0,
+ .cfg_lo = 0,
+ .src_master = 0,
+ .dst_master = 0,
+};
+
+/* dmac device registeration */
+struct dw_dma_platform_data dmac_plat_data = {
+ .nr_channels = 8,
+ .chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
+ .chan_priority = CHAN_PRIORITY_DESCENDING,
+ .block_size = 4095U,
+ .nr_masters = 2,
+ .data_width = { 3, 3, 0, 0 },
};

void __init spear13xx_l2x0_init(void)
--
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/