2013/1/26 Javier Martinez Canillas <martinez.javier@xxxxxxxxx>:On Sat, Jan 26, 2013 at 4:16 PM, Matthias Brugger <matthias.bgg@xxxxxxxxx>
wrote:
Hi Benoit,
2012/12/12 Benoit Cousson <b-cousson@xxxxxx>:Hi Matthias,
On 12/12/2012 04:33 PM, Matthias Brugger wrote:This patch is a follow-up patch for Javier Martinez effort adding
initial
device tree support to IGEP technology devices. [1]
It adds uart1 and uart2 bindings to the generic dtsi for the IGEP
boards.
[1] http://www.spinics.net/lists/linux-omap/msg83409.html
Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
---
arch/arm/boot/dts/omap3-igep.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi
b/arch/arm/boot/dts/omap3-igep.dtsi
index 125fe00..c02e3c0 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -27,6 +27,20 @@
};
&omap3_pmx_core {
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0
*/
+ 0x14c 0 /* uart1_tx.uart1_tx OUTPUT |
MODE0 */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0
*/
+ 0x148 0 /* uart2_tx.uart2_tx OUTPUT |
MODE0 */
+ >;
+ };
+
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0
*/
@@ -77,6 +91,16 @@
status = "disabled";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
That looks good to me. I'll apply it on top of javier's series for 3.9.
Can you pin-point me to the repository where this patches are in right
now? I tried to figure it out these days, but didn't found where to
clone the repository from.
Thanks,
Matthias
Hi Matthias,
OMAP DT tree is:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
Hi all,
unfortunately I can't find the patch in this tree.