Re: [Update][PATCH] ACPI / hotplug: Fix concurrency issues andmemory leaks
From: Toshi Kani
Date: Wed Feb 13 2013 - 19:27:37 EST
On Thu, 2013-02-14 at 00:42 +0100, Rafael J. Wysocki wrote:
> On Wednesday, February 13, 2013 04:09:29 PM Toshi Kani wrote:
> > On Wed, 2013-02-13 at 21:52 +0100, Rafael J. Wysocki wrote:
> > > On Wednesday, February 13, 2013 10:43:58 AM Toshi Kani wrote:
> > > > On Wed, 2013-02-13 at 14:16 +0100, Rafael J. Wysocki wrote:
> > > > > From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> > > > >
> > > > > This changeset is aimed at fixing a few different but related
> > > > > problems in the ACPI hotplug infrastructure.
> > > > >
> > > > > First of all, since notify handlers may be run in parallel with
> > > > > acpi_bus_scan(), acpi_bus_trim() and acpi_bus_hot_remove_device()
> > > > > and some of them are installed for ACPI handles that have no struct
> > > > > acpi_device objects attached (i.e. before those objects are created),
> > > > > those notify handlers have to take acpi_scan_lock to prevent races
> > > > > from taking place (e.g. a struct acpi_device is found to be present
> > > > > for the given ACPI handle, but right after that it is removed by
> > > > > acpi_bus_trim() running in parallel to the given notify handler).
> > > > > Moreover, since some of them call acpi_bus_scan() and
> > > > > acpi_bus_trim(), this leads to the conclusion that acpi_scan_lock
> > > > > should be acquired by the callers of these two funtions rather by
> > > > > these functions themselves.
> > > > >
> > > > > For these reasons, make all notify handlers that can handle device
> > > > > addition and eject events take acpi_scan_lock and remove the
> > > > > acpi_scan_lock locking from acpi_bus_scan() and acpi_bus_trim().
> > > > > Accordingly, update all of their users to make sure that they
> > > > > are always called under acpi_scan_lock.
> > > > >
> > > > > Furthermore, since eject operations are carried out asynchronously
> > > > > with respect to the notify events that trigger them, with the help
> > > > > of acpi_bus_hot_remove_device(), even if notify handlers take the
> > > > > ACPI scan lock, it still is possible that, for example,
> > > > > acpi_bus_trim() will run between acpi_bus_hot_remove_device() and
> > > > > the notify handler that scheduled its execution and that
> > > > > acpi_bus_trim() will remove the device node passed to
> > > > > acpi_bus_hot_remove_device() for ejection. In that case, the struct
> > > > > acpi_device object obtained by acpi_bus_hot_remove_device() will be
> > > > > invalid and not-so-funny things will ensue. To protect agaist that,
> > > > > make the users of acpi_bus_hot_remove_device() run get_device() on
> > > > > ACPI device node objects that are about to be passed to it and make
> > > > > acpi_bus_hot_remove_device() run put_device() on them and check if
> > > > > their ACPI handles are not NULL (make acpi_device_unregister() clear
> > > > > the device nodes' ACPI handles for that check to work).
> > > > >
> > > > > Finally, observe that acpi_os_hotplug_execute() actually can fail,
> > > > > in which case its caller ought to free memory allocated for the
> > > > > context object to prevent leaks from happening. It also needs to
> > > > > run put_device() on the device node that it ran get_device() on
> > > > > previously in that case. Modify the code accordingly.
> > > >
> > > > I am concerned with this approach. ACPICA calls notify handlers through
> > > > kacpi_notify_wq, which has the max active set to 1. We then use
> > > > kacpi_hotplug_wq (which also has the max active set to 1) so that a
> > > > hotplug procedure does not block the notify handlers since they can be
> > > > used for non-hotplug events as well.
> > >
> > > In fact we use kacpi_hotplug_wq for a different reason. Please read the
> > > comment in __acpi_os_execute() for more details.
> > Yes, I am aware of the issue as well.
> > > > Acquiring the scan lock in a notify handler means that a hotplug procedure
> > > > can block any notify events.
> > >
> > > Yes, it can.
> > >
> > > > So, I'd prefer the following approach.
> > > >
> > > > - Change all hot-plug procedures (i.e. both add and delete) to proceed
> > > > under kacpi_hotplug_wq by calling acpi_os_hotplug_execute(). This
> > > > serializes all hotplug procedures, and prevents blocking other notify
> > > > events.
> > >
> > > Yes, we can do that. I was thinking about doing that change, but not in v3.9.
> > > There are simply too many notify handlers already there to do that so late in
> > > the cycle. And doing that for acpiphp, for example, won't be straightforward
> > > at all.
> > Right. I was not suggesting this approach for v3.9.
> > > Please think about the $subject patch as a temporary measure until we can do
> > > something better (which we need to do anyway to reduce code duplication among
> > > other things).
> > I am fine with the scan lock as long as it is internal. This patch
> > publishes the locking interfaces to other modules, which made me worried
> > that this might become a long term solution. If we need to fix this
> > issue for v3.9, I am OK with it as you clarified this as a temporary
> > solution.
> Yes, I'm not going to allow anyone to use acpi_scan_lock anywhere else. :-)
> I'm also going to make it internal again in v3.10 if possible.
Sounds good. :-)
> > > > (Ideally, we should also run all online/offline procedures
> > > > under a same work-queue, just like my RFC patchset did, but this is a
> > > > different topic for now.)
> > >
> > > No, I don't think it is appropriate to run online/offline from _any_
> > > workqueue. In my opinion they should be run from user space.
> > I think there are pros and cons for this. If we use a user thread to
> > run online/offline procedure, we can return a result directly. However,
> > if an operation takes a long time, it will block the user thread until
> > it is done. In addition, we have race conditions between hotplug and
> > online/offline operations. So, we may need to come up with other type
> > of locking if we do not use a workqueue to address it. Having both the
> > scan lock and other lock in the callers would not be good.
> Well, we definitely need to make offline/online and hotplug mutually exclusive,
> this way or another. I'm hoping that the scan lock will be sufficient for
> that, but I may be wrong.
Online/offline operations are independent from ACPI, so I do not think
the scan lock will be effective on this.
> > > > - Revert 5993c4670 unless this change is absolutely necessary. From
> > > > the change log, it is not clear to me why this change was needed. It
> > > > changed acpi_bus_hot_remove_device() to take an acpi_device, instead of
> > > > an acpi_handle, which introduced a race condition with acpi_device.
> > > > acpi_bus_hot_remove_device() should take an acpi_handle, and then obtain
> > > > its acpi_device from the acpi_handle since this function is serialized.
> > >
> > > I thought about that, but actually there's no guarantee that the handle
> > > will be valid after _EJ0 as far as I can say. So the race condition is
> > > going to be there anyway and using struct acpi_device just makes it easier
> > > to avoid it.
> > In theory, yes, a stale handle could be a problem, if _EJ0 performs
> > unload table and if ACPICA frees up its internal data structure pointed
> > by the handle as a result. But we should not see such issue now since
> > we do not support dynamic ACPI namespace yet.
> I'm waiting for information from Bob about that. If we can assume ACPI handles
> to be always valid, that will simplify things quite a bit.
Thanks for checking on this.
> > > > - Remove sanity checks with an acpi_device in the notify handlers,
> > > > which have a race condition with acpi_device. These type-specific
> > > > checks will need to be removed when we have a common notify handler
> > > > anyway. The notify handler can continue to check the status of ACPI
> > > > device object with an acpi_handle. Type-specific sanity checks /
> > > > validations can be performed within a hotplug procedure, instead.
> > >
> > > Well, the sanest approach here would be to queue up a work item on
> > > kacpi_hotplug_wq if the event is of a "hotplug" type and let that work
> > > item do all checks, run acpi_bus_scan() etc. But not in v3.9.
> > Agreed, and that's what I meant.
> > > For v3.9, the most straightforward and least intrusive change we can do
> > > is the $subject patch as far as I can say. If you can suggest something
> > > less intrusive and more straightforward, please do.
> > My suggestion is to keep the scan lock internal for v3.9 and implement a
> > new hotplug framework (i.e. the one with user space approach) for v3.10
> > with a proper locking mechanism. But, since you clarified this as a
> > temporary solution, I am OK with it if we need to fix it now.
> Well, honestly, I wouldn't have posted this patch if I hadn't thought that we
> needed a fix for v3.9. :-)
Very true. :-)
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/