[PATCH v2 25/26] PCI: Disable mem in the ioapic removing path

[Yinghai Lu]

For physical hot plug should be ok, but for remove/rescan path will
need us to disable that.

otherwise rescan mmio resource for pci ioapic device will not be
sized and allocated, aka skiped.
For ioapic_probe:pci_enable_device will not enable the device
correctly, and will bail out early.

So we can just disable mmio for all removing case, and that will not hurt
real hotplug path.

Signed-off-by: <yinghai@xxxxxxxxxx>
---
 drivers/pci/ioapic.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/pci/ioapic.c b/drivers/pci/ioapic.c
index 3c6bbdd..8dacfd0 100644
--- a/drivers/pci/ioapic.c
+++ b/drivers/pci/ioapic.c
@@ -88,6 +88,17 @@ exit_free:
 	return -ENODEV;
 }
 
+static void pci_disable_device_mem(struct pci_dev *dev)
+{
+	u16 pci_command;
+
+	pci_read_config_word(dev, PCI_COMMAND, &pci_command);
+	if (pci_command & PCI_COMMAND_MEMORY) {
+		pci_command &= ~PCI_COMMAND_MEMORY;
+		pci_write_config_word(dev, PCI_COMMAND, pci_command);
+	}
+}
+
 static void ioapic_remove(struct pci_dev *dev)
 {
 	struct ioapic *ioapic = pci_get_drvdata(dev);
@@ -95,6 +106,8 @@ static void ioapic_remove(struct pci_dev *dev)
 	acpi_unregister_ioapic(ioapic->handle, ioapic->gsi_base);
 	pci_release_region(dev, 0);
 	pci_disable_device(dev);
+	/* need to disable it, otherwise remove/rescan will not work */
+	pci_disable_device_mem(dev);
 	kfree(ioapic);
 }
 
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/