Re: [Intel-gfx] drm_kms_helper problems

[Mark Hounschell]

On 10/23/2012 02:36 AM, Bruno Prémont wrote:
> On Mon, 22 Oct 2012 17:54:26 Mark Hounschell wrote:
> > Another interesting thing. I changed the boot file to only
> > "video=HDMI-A-1:e" and the monitor on the DVI port complains about the
> > resolution being to high. I then put the hdmi cable onto my dvi/hdmi
> > adapter and plug it into the DVI port and wala, a 1920 x 1080 desktop. So I
> > reboot with it in that configuration  and again comes up good connected to
> > the DVI connector.
>
> So at least the EDID firmware now gets recognized and considered :)
>
> > # xrandr
> > Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
> > VGA1 disconnected (normal left inverted right x axis y axis)
> > HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis)
> > 708mm x 398mm
> >      1920x1080      60.0*+   50.0     25.0     30.0     30.0     24.0
> >      1680x1050      59.9
> >      1680x945       60.0
> >      1400x1050      59.9
> >      1600x900       60.0
> >      1280x1024      75.0     60.0
> >      1440x900       59.9
> >      1280x960       60.0
> >      1366x768       60.0
> >      1360x768       60.0
> >      1280x800       74.9     59.9
> >      1152x864       75.0
> >      1280x768       74.9     60.0
> >      1280x720       50.0     60.0
> >      1024x768       75.1     70.1     60.0
> >      1024x576       60.0
> >      800x600        72.2     75.0     60.3     56.2
> >      720x576        50.0
> >      848x480        60.0
> >      720x480        59.9
> >      640x480        72.8     75.0     60.0     59.9     59.9
> >      720x400        70.1
> > DP1 disconnected (normal left inverted right x axis y axis)
> > HDMI2 disconnected (normal left inverted right x axis y axis)
> > HDMI3 disconnected (normal left inverted right x axis y axis)
> > DP2 disconnected (normal left inverted right x axis y axis)
> > DP3 disconnected (normal left inverted right x axis y axis)
> >
> > I'm still getting the same messages spewed into the kernel log file. So
> > this looks to me like the kernel is confused. Again, I ask, why do I have 3
> > HDMIs and 3 DPs but just one VGA.
>
> Maybe Daniel or Chris can comment on that high quantity of DP/HDMI
> connectors seen by driver. Those are probably also the cause of the
> persistent EDID complaints in kernel log.

What I see is that HDMI-1 is the DVI port, HDMI-3 is the HDMI port, so I 
assume HDMI-2 is that "other" video port.

If I set video=HDMI-A-1:d nothing comes out the DVI port and if I set 
HDMI-A-3:d nothing comes out the HDMI port. This is rather confusing. Is it 
correct?

> You could maybe try to disable those outputs in xorg.conf in order to not
> get your log filled with bad EDID complaints for "unused" connectors.
> But as specifying the EDID as firmware it's just a work-around to the
> issue.

These messages get spewed even if X is not running. The machine is 
unresponsive for 2-3 seconds when this happens.

Sure, specifying the EDID as firmware is a work around, but it's a work 
around that isn't working as intended on this hardware, for whatever 
reason. Seems like someone would be interested in fixing it? I've got a 
machine I could provide some access to?

Mark



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/