Re: [PATCH v4 03/10] pinctrl: mvebu: kirkwood pinctrl driver

[Jason Cooper]

On Sun, Sep 16, 2012 at 09:46:52AM +0200, Andrew Lunn wrote:
> > +++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
> > @@ -0,0 +1,279 @@
> > +* Marvell Kirkwood SoC pinctrl driver for mpp
> > +
> > +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
> > +part and usage.
> > +
> > +Required properties:
> > +- compatible: "marvell,88f6180-pinctrl",
> > +              "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
> > +              "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
> > +
> > +This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628
> 
> Hi Sebastian 
> 
> The current MPP code determines for itself what chip it is running on.
> It can then check if a pin configuration is valid for the current
> run time environment.
> 
> Here you are suggesting we have to put into the DT what chip we expect
> to be on.
> 
> What is the advantage of this, over getting the information from the
> device itself?

The DT should describe the hardware as accurately as possible.  We can't
always assume Linux will be the only thing the DT is handed off to.

> If i wanted to mass convert all existing kirkwood DT boards over to
> use pinctrl, im stuck at the very first step. I've no idea what chip
> they use, it was not relevant before.

Let's try to do the DT correctly, and create a migration path for
kirkwood to work first, then migrate to using the DT fully.

thx,

Jason.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/