Re: [BISECTED] ipmi_si not loading since 2.6.39

From: Corey Minyard
Date: Tue Apr 24 2012 - 09:41:34 EST


Looks like you might need change b1608d69cb804e414d0887140ba08a9398e4e638

-corey

On 04/23/2012 03:09 PM, Rob Herring wrote:
On 04/21/2012 02:20 AM, Nikola Ciprich wrote:
Hi,

here's further information Rob and Corey requested:

on working system:

[root@vbox4 ~]# cat /proc/ipmi/0/params
kcs,i/o,0xca2,rsp=1,rsi=1,rsh=0,irq=0,ipmb=0

dmesg snippet:

[ 41.759319] ipmi message handler version 39.2
[ 41.760690] ipmi device interface
[ 42.765334] IPMI System Interface driver.
[ 42.765336] ipmi_si: probing via hardcoded address
[ 42.765337] ipmi_si: Adding hardcoded-specified kcs state machine
[ 42.765340] ipmi_si: Trying hardcoded-specified kcs state machine at i/o address 0xca8, slave address 0x0, irq 0
[ 42.765344] ipmi_si: Interface detection failed
[ 42.770823] ipmi_si: probing via SMBIOS
[ 42.770834] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 42.770836] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 42.770838] ipmi_si: probing via SPMI
[ 42.770840] ipmi_si: SPMI: io 0xe4 regsize 1 spacing 1 irq 0
[ 42.770841] ipmi_si: Adding SPMI-specified kcs state machine
[ 42.770843] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 42.798137] ipmi_si ipmi_si.0: Error clearing flags: cc
[ 42.801011] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x002a7c, prod_id: 0x0624, dev_id: 0x20)
[ 42.801068] ipmi_si ipmi_si.0: IPMI kcs interface initialized


dmidecode:

IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x00
NV Storage Device: Not Present
Base Address: 0x0000000000000CA2 (I/O)
Register Spacing: Successive Byte Boundaries

Base Board Information
Manufacturer: Supermicro
Product Name: X9SCL/X9SCM

(but we're experiencing this on various supermicro bords, ie X8DTL)

Tried setting parameters by hand didn't help:

modprobe ipmi_si type=kcs addrs=0xca8 regspacings=1 regsizes=1 regshifts=0 irqs=0 slave_addrs=0x0

(not sure whether I got them correct though, and values mostly seem to me to be defaults anyways..)

It is working for me on a SuperMicro system with ubuntu oneiric (3.0
based).

[597160.259728] ipmi_si: probing via SMBIOS
[597160.259730] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[597160.259731] ipmi_si: Adding SMBIOS-specified kcs state machine
[597160.259734] ipmi_si: probing via SPMI
[597160.259735] ipmi_si: SPMI: io 0xe4 regsize 1 spacing 1 irq 0
[597160.259737] ipmi_si: Adding SPMI-specified kcs state machine
[597160.259739] ipmi_si: Trying SMBIOS-specified kcs state machine at
i/o address 0xca2, slave address 0x0, irq 0
[597160.378757] ipmi_si: Invalid return from get global enables command,
cannot enable the event buffer.
[597160.382032] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x00b980,
prod_id: 0x0624, dev_id: 0x20)
[597160.382040] ipmi_si ipmi_si.0: IPMI kcs interface initialized
[597179.973960] ipmi device interface
localadm@sandy1:~$ ipmitool bmc info
Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No
such file or directory
Get Device ID command failed
localadm@sandy1:~$ sudo ipmitool bmc info
Device ID : 32
Device Revision : 1
Firmware Revision : 1.1
IPMI Version : 2.0
Manufacturer ID : 47488
Manufacturer Name : Unknown (0xB980)
Product ID : 1572 (0x0624)
Product Name : Unknown (0x624)
Device Available : yes
Provides Device SDRs : no
Additional Device Support :
Sensor Device
SDR Repository Device
SEL Device
FRU Inventory Device
IPMB Event Receiver
IPMB Event Generator
Chassis Device
Aux Firmware Rev Info :
0x06
0x00
0x00
0x00
localadm@sandy1:~$ uname -a
Linux sandy1 3.0.0-16-generic #28-Ubuntu SMP Fri Jan 27 17:44:39 UTC
2012 x86_64 x86_64 x86_64 GNU/Linux

Rob

nik


On Sat, Apr 21, 2012 at 12:38:33AM +0200, Nikola Ciprich wrote:
Hello,

I was trying to find out why IPMI stopped working on new kernels. Since 2.6.39
module loading ends with following message:

ipmi_si: Interface detection failed

Then ipmitool is unable to control IPMI device.

Works for 2.6.38, doesn't work for 2.6.39, 3.0.28, 3.4-rc1.

I got this bisected to following commit:

commit a1e9c9dd3383e6a1a762464ad604b1081774dbda
Author: Rob Herring<rob.herring@xxxxxxxxxxx>
Date: Wed Feb 23 15:37:59 2011 -0600

ipmi: convert OF driver to platform driver

of_bus is deprecated in favor of the plain platform bus. This patch
merges the ipmi OF driver with the existing platform driver.

CONFIG_PPC_OF occurrances are removed or replaced with CONFIG_OF.

Compile tested with and without CONFIG_OF. Tested OF probe and
default probe cases.

Signed-off-by: Rob Herring<rob.herring@xxxxxxxxxxx>
Signed-off-by: Grant Likely<grant.likely@xxxxxxxxxxxx>

I wonder whether this is a bug, or I'm doing something wrong?

Thanks in advance!

with best regards

nik


--
-------------------------------------
Ing. Nikola CIPRICH
LinuxBox.cz, s.r.o.
28. rijna 168, 709 01 Ostrava

tel.: +420 596 603 142
fax: +420 596 621 273
mobil: +420 777 093 799

www.linuxbox.cz

mobil servis: +420 737 238 656
email servis: servis@xxxxxxxxxxx
-------------------------------------


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/