Re: [PATCH] [trivial] qla2xxx: Fix typo in qla2xxx files
From: Chad Dupuis
Date: Fri Apr 13 2012 - 10:17:07 EST
On Wed, 11 Apr 2012, Masanari Iida wrote:
Correct spelling typo within qla2xxx files.
Signed-off-by: Masanari Iida <standby24x7@xxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_dbg.c | 4 ++--
drivers/scsi/qla2xxx/qla_fw.h | 4 ++--
drivers/scsi/qla2xxx/qla_iocb.c | 2 +-
drivers/scsi/qla2xxx/qla_isr.c | 2 +-
drivers/scsi/qla2xxx/qla_mbx.c | 4 ++--
drivers/scsi/qla2xxx/qla_mid.c | 2 +-
drivers/scsi/qla2xxx/qla_nx.c | 4 ++--
drivers/scsi/qla2xxx/qla_os.c | 6 +++---
drivers/scsi/qla2xxx/qla_target.c | 12 ++++++------
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 ++--
drivers/scsi/qla2xxx/tcm_qla2xxx.h | 2 +-
11 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 0393915..a774f9c 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -2295,7 +2295,7 @@ ql_dbg(uint32_t level, scsi_qla_host_t *vha, int32_t id, const char *fmt, ...)
/*
* This function is for formatting and logging debug information.
- * It is to be used when vha is not available and pci is availble,
+ * It is to be used when vha is not available and pci is available,
* i.e., before host allocation. It formats the message and logs it
* to the messages file.
* parameters:
@@ -2390,7 +2390,7 @@ ql_log(uint32_t level, scsi_qla_host_t *vha, int32_t id, const char *fmt, ...)
/*
* This function is for formatting and logging log messages.
- * It is to be used when vha is not available and pci is availble,
+ * It is to be used when vha is not available and pci is available,
* i.e., before host allocation. It formats the message and logs
* it to the messages file. All the messages are logged irrespective
* of the value of ql2xextended_error_logging.
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 6d7d775..980b5a7 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1130,7 +1130,7 @@ struct mid_db_entry_24xx {
/*
* Virtual Port Control IOCB
*/
-#define VP_CTRL_IOCB_TYPE 0x30 /* Vitual Port Control entry. */
+#define VP_CTRL_IOCB_TYPE 0x30 /* Virtual Port Control entry. */
struct vp_ctrl_entry_24xx {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
@@ -1166,7 +1166,7 @@ struct vp_ctrl_entry_24xx {
/*
* Modify Virtual Port Configuration IOCB
*/
-#define VP_CONFIG_IOCB_TYPE 0x31 /* Vitual Port Config entry. */
+#define VP_CONFIG_IOCB_TYPE 0x31 /* Virtual Port Config entry. */
struct vp_config_entry_24xx {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 88dd472..a075f46 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1936,7 +1936,7 @@ qla2x00_alloc_iocbs(scsi_qla_host_t *vha, srb_t *sp)
}
if (index == MAX_OUTSTANDING_COMMANDS) {
ql_log(ql_log_warn, vha, 0x700b,
- "No room on oustanding cmd array.\n");
+ "No room on outstanding cmd array.\n");
goto queuing_error;
}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 6656fda..a5ac4f7 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1415,7 +1415,7 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t par_sense_len,
struct scsi_dif_tuple {
__be16 guard; /* Checksum */
- __be16 app_tag; /* APPL identifer */
+ __be16 app_tag; /* APPL identifier */
__be32 ref_tag; /* Target LBA or indirect LBA */
};
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index c0d7080..a2f74a5 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -321,7 +321,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
CRB_NIU_XG_PAUSE_CTL_P1);
}
ql_log(ql_log_info, base_vha, 0x101c,
- "Mailbox cmd timeout occured, cmd=0x%x, "
+ "Mailbox cmd timeout occurred, cmd=0x%x, "
"mb[0]=0x%x, eeh_busy=0x%x. Scheduling ISP "
"abort.\n", command, mcp->mb[0],
ha->flags.eeh_busy);
@@ -346,7 +346,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
CRB_NIU_XG_PAUSE_CTL_P1);
}
ql_log(ql_log_info, base_vha, 0x101e,
- "Mailbox cmd timeout occured, cmd=0x%x, "
+ "Mailbox cmd timeout occurred, cmd=0x%x, "
"mb[0]=0x%x. Scheduling ISP abort ",
command, mcp->mb[0]);
set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index cdd2fdd..394f112 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -650,7 +650,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
&req->dma, GFP_KERNEL);
if (req->ring == NULL) {
ql_log(ql_log_fatal, base_vha, 0x00da,
- "Failed to allocte memory for request_ring.\n");
+ "Failed to allocate memory for request_ring.\n");
goto que_failed;
}
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index f052853..d281b47 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2446,7 +2446,7 @@ qla82xx_load_fw(scsi_qla_host_t *vha)
if (qla82xx_fw_load_from_flash(ha) == QLA_SUCCESS) {
ql_log(ql_log_info, vha, 0x00a1,
- "Firmware loaded successully from flash.\n");
+ "Firmware loaded successfully from flash.\n");
return QLA_SUCCESS;
} else {
ql_log(ql_log_warn, vha, 0x0108,
@@ -4005,7 +4005,7 @@ qla82xx_minidump_process_rdmem(scsi_qla_host_t *vha,
if (r_addr & 0xf) {
ql_log(ql_log_warn, vha, 0xb033,
- "Read addr 0x%x not 16 bytes alligned\n", r_addr);
+ "Read addr 0x%x not 16 bytes aligned\n", r_addr);
return rval;
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index c49f39e..850364f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1103,7 +1103,7 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
cmd->device->lun, type) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x800d,
- "wait for peding cmds failed for cmd=%p.\n", cmd);
+ "wait for pending cmds failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
}
@@ -1202,7 +1202,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
eh_bus_reset_done:
ql_log(ql_log_warn, vha, 0x802b,
"BUS RESET %s nexus=%ld:%d:%d.\n",
- (ret == FAILED) ? "FAILED" : "SUCCEDED", vha->host_no, id, lun);
+ (ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no, id, lun);
return ret;
}
@@ -4529,7 +4529,7 @@ qla2x00_module_init(void)
return ret;
} else if (ret > 0) {
/*
- * If initiator mode is explictly disabled by qla_tgt_init(),
+ * If initiator mode is explicitly disabled by qla_tgt_init(),
* prevent scsi_transport_fc.c:fc_scsi_scan_rport() from
* performing scsi_scan_target() during LOOP UP event.
*/
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 7368fcb..e20bc5f 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -74,7 +74,7 @@ enum fcp_resp_rsp_codes {
#define FCP_PTA_SIMPLE 0 /* simple task attribute */
#define FCP_PTA_HEADQ 1 /* head of queue task attribute */
#define FCP_PTA_ORDERED 2 /* ordered task attribute */
-#define FCP_PTA_ACA 4 /* auto. contigent allegiance */
+#define FCP_PTA_ACA 4 /* auto. contingent allegiance */
#define FCP_PTA_MASK 7 /* mask for task attribute field */
#define FCP_PRI_SHIFT 3 /* priority field starts in bit 3 */
#define FCP_PRI_RESVD_MASK 0x80 /* reserved bits in priority field */
@@ -3814,12 +3814,12 @@ void qla_tgt_async_event(uint16_t code, struct scsi_qla_host *vha, uint16_t *mai
case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
case MBA_WAKEUP_THRES: /* Request Queue Wake-up. */
ql_dbg(ql_dbg_tgt_mgt, vha, 0xe141, "qla_target(%d): System error async event %#x "
- "occured", vha->vp_idx, code);
+ "occurred", vha->vp_idx, code);
break;
case MBA_LOOP_UP:
{
- ql_dbg(ql_dbg_tgt_mgt, vha, 0xe142, "qla_target(%d): Async LOOP_UP occured "
+ ql_dbg(ql_dbg_tgt_mgt, vha, 0xe142, "qla_target(%d): Async LOOP_UP occurred "
"(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
@@ -3835,7 +3835,7 @@ void qla_tgt_async_event(uint16_t code, struct scsi_qla_host *vha, uint16_t *mai
case MBA_LOOP_DOWN:
case MBA_LIP_RESET:
case MBA_RSCN_UPDATE:
- ql_dbg(ql_dbg_tgt_mgt, vha, 0xe143, "qla_target(%d): Async event %#x occured "
+ ql_dbg(ql_dbg_tgt_mgt, vha, 0xe143, "qla_target(%d): Async event %#x occurred "
"(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
code, le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
@@ -3843,7 +3843,7 @@ void qla_tgt_async_event(uint16_t code, struct scsi_qla_host *vha, uint16_t *mai
case MBA_PORT_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xe144, "qla_target(%d): Port update async event %#x "
- "occured: updating the ports database (m[1]=%x, m[2]=%x, "
+ "occurred: updating the ports database (m[1]=%x, m[2]=%x, "
"m[3]=%x, m[4]=%x)", vha->vp_idx, code,
le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
@@ -3855,7 +3855,7 @@ void qla_tgt_async_event(uint16_t code, struct scsi_qla_host *vha, uint16_t *mai
break;
default:
- ql_dbg(ql_dbg_tgt_mgt, vha, 0xe147, "qla_target(%d): Async event %#x occured: "
+ ql_dbg(ql_dbg_tgt_mgt, vha, 0xe147, "qla_target(%d): Async event %#x occurred: "
"ignore (m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)",
vha->vp_idx, code,
le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 6dd8102..2a30c5a 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -363,7 +363,7 @@ struct se_node_acl *tcm_qla2xxx_alloc_fabric_acl(struct se_portal_group *se_tpg)
nacl = kzalloc(sizeof(struct tcm_qla2xxx_nacl), GFP_KERNEL);
if (!nacl) {
- pr_err("Unable to alocate struct tcm_qla2xxx_nacl\n");
+ pr_err("Unable to allocate struct tcm_qla2xxx_nacl\n");
return NULL;
}
@@ -1511,7 +1511,7 @@ static int tcm_qla2xxx_check_initiator_node_acl(
return PTR_ERR(se_sess);
}
/*
- * Format the FCP Initiator port_name into colon seperated values to match
+ * Format the FCP Initiator port_name into colon separated values to match
* the format by tcm_qla2xxx explict ConfigFS NodeACLs.
*/
memset(&port_name, 0, 36);
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
index 41730ed..3e9ee43 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
@@ -3,7 +3,7 @@
#define TCM_QLA2XXX_VERSION "v0.1"
/* length of ASCII WWPNs including pad */
#define TCM_QLA2XXX_NAMELEN 32
-/* lenth of ASCII NPIV 'WWPN+WWNN' including pad */
+/* length of ASCII NPIV 'WWPN+WWNN' including pad */
#define TCM_QLA2XXX_NPIV_NAMELEN 66
#include "qla_target.h"
--
1.7.10.128.g7945c
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Masanari,
There's a few parts of this patch that didn't apply since we had already
fixed them in patches that we are going to submit in the future. We will
take the parts that apply correctly and submit with a future patch set.
Thanks,
Chad
This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/