[PATCH] [trivial] qla2xxx: Fix typo in qla2xxx files
From: Masanari Iida
Date: Wed Apr 11 2012 - 12:31:08 EST
Correct spelling typo within qla2xxx files.
Signed-off-by: Masanari Iida <standby24x7@xxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_dbg.c | 4 ++--
drivers/scsi/qla2xxx/qla_fw.h | 4 ++--
drivers/scsi/qla2xxx/qla_iocb.c | 2 +-
drivers/scsi/qla2xxx/qla_isr.c | 2 +-
drivers/scsi/qla2xxx/qla_mbx.c | 4 ++--
drivers/scsi/qla2xxx/qla_mid.c | 2 +-
drivers/scsi/qla2xxx/qla_nx.c | 4 ++--
drivers/scsi/qla2xxx/qla_os.c | 6 +++---
drivers/scsi/qla2xxx/qla_target.c | 12 ++++++------
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 ++--
drivers/scsi/qla2xxx/tcm_qla2xxx.h | 2 +-
11 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 0393915..a774f9c 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -2295,7 +2295,7 @@ ql_dbg(uint32_t level, scsi_qla_host_t *vha, int32_t id, const char *fmt, ...)
/*
* This function is for formatting and logging debug information.
- * It is to be used when vha is not available and pci is availble,
+ * It is to be used when vha is not available and pci is available,
* i.e., before host allocation. It formats the message and logs it
* to the messages file.
* parameters:
@@ -2390,7 +2390,7 @@ ql_log(uint32_t level, scsi_qla_host_t *vha, int32_t id, const char *fmt, ...)
/*
* This function is for formatting and logging log messages.
- * It is to be used when vha is not available and pci is availble,
+ * It is to be used when vha is not available and pci is available,
* i.e., before host allocation. It formats the message and logs
* it to the messages file. All the messages are logged irrespective
* of the value of ql2xextended_error_logging.
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 6d7d775..980b5a7 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1130,7 +1130,7 @@ struct mid_db_entry_24xx {
/*
* Virtual Port Control IOCB
*/
-#define VP_CTRL_IOCB_TYPE 0x30 /* Vitual Port Control entry. */
+#define VP_CTRL_IOCB_TYPE 0x30 /* Virtual Port Control entry. */
struct vp_ctrl_entry_24xx {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
@@ -1166,7 +1166,7 @@ struct vp_ctrl_entry_24xx {
/*
* Modify Virtual Port Configuration IOCB
*/
-#define VP_CONFIG_IOCB_TYPE 0x31 /* Vitual Port Config entry. */
+#define VP_CONFIG_IOCB_TYPE 0x31 /* Virtual Port Config entry. */
struct vp_config_entry_24xx {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 88dd472..a075f46 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1936,7 +1936,7 @@ qla2x00_alloc_iocbs(scsi_qla_host_t *vha, srb_t *sp)
}
if (index == MAX_OUTSTANDING_COMMANDS) {
ql_log(ql_log_warn, vha, 0x700b,
- "No room on oustanding cmd array.\n");
+ "No room on outstanding cmd array.\n");
goto queuing_error;
}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 6656fda..a5ac4f7 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1415,7 +1415,7 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t par_sense_len,
struct scsi_dif_tuple {
__be16 guard; /* Checksum */
- __be16 app_tag; /* APPL identifer */
+ __be16 app_tag; /* APPL identifier */
__be32 ref_tag; /* Target LBA or indirect LBA */
};
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index c0d7080..a2f74a5 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -321,7 +321,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
CRB_NIU_XG_PAUSE_CTL_P1);
}
ql_log(ql_log_info, base_vha, 0x101c,
- "Mailbox cmd timeout occured, cmd=0x%x, "
+ "Mailbox cmd timeout occurred, cmd=0x%x, "
"mb[0]=0x%x, eeh_busy=0x%x. Scheduling ISP "
"abort.\n", command, mcp->mb[0],
ha->flags.eeh_busy);
@@ -346,7 +346,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
CRB_NIU_XG_PAUSE_CTL_P1);
}
ql_log(ql_log_info, base_vha, 0x101e,
- "Mailbox cmd timeout occured, cmd=0x%x, "
+ "Mailbox cmd timeout occurred, cmd=0x%x, "
"mb[0]=0x%x. Scheduling ISP abort ",
command, mcp->mb[0]);
set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index cdd2fdd..394f112 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -650,7 +650,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
&req->dma, GFP_KERNEL);
if (req->ring == NULL) {
ql_log(ql_log_fatal, base_vha, 0x00da,
- "Failed to allocte memory for request_ring.\n");
+ "Failed to allocate memory for request_ring.\n");
goto que_failed;
}
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index f052853..d281b47 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2446,7 +2446,7 @@ qla82xx_load_fw(scsi_qla_host_t *vha)
if (qla82xx_fw_load_from_flash(ha) == QLA_SUCCESS) {
ql_log(ql_log_info, vha, 0x00a1,
- "Firmware loaded successully from flash.\n");
+ "Firmware loaded successfully from flash.\n");
return QLA_SUCCESS;
} else {
ql_log(ql_log_warn, vha, 0x0108,
@@ -4005,7 +4005,7 @@ qla82xx_minidump_process_rdmem(scsi_qla_host_t *vha,
if (r_addr & 0xf) {
ql_log(ql_log_warn, vha, 0xb033,
- "Read addr 0x%x not 16 bytes alligned\n", r_addr);
+ "Read addr 0x%x not 16 bytes aligned\n", r_addr);
return rval;
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index c49f39e..850364f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1103,7 +1103,7 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
cmd->device->lun, type) != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x800d,
- "wait for peding cmds failed for cmd=%p.\n", cmd);
+ "wait for pending cmds failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
}
@@ -1202,7 +1202,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
eh_bus_reset_done:
ql_log(ql_log_warn, vha, 0x802b,
"BUS RESET %s nexus=%ld:%d:%d.\n",
- (ret == FAILED) ? "FAILED" : "SUCCEDED", vha->host_no, id, lun);
+ (ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no, id, lun);
return ret;
}
@@ -4529,7 +4529,7 @@ qla2x00_module_init(void)
return ret;
} else if (ret > 0) {
/*
- * If initiator mode is explictly disabled by qla_tgt_init(),
+ * If initiator mode is explicitly disabled by qla_tgt_init(),
* prevent scsi_transport_fc.c:fc_scsi_scan_rport() from
* performing scsi_scan_target() during LOOP UP event.
*/
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 7368fcb..e20bc5f 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -74,7 +74,7 @@ enum fcp_resp_rsp_codes {
#define FCP_PTA_SIMPLE 0 /* simple task attribute */
#define FCP_PTA_HEADQ 1 /* head of queue task attribute */
#define FCP_PTA_ORDERED 2 /* ordered task attribute */
-#define FCP_PTA_ACA 4 /* auto. contigent allegiance */
+#define FCP_PTA_ACA 4 /* auto. contingent allegiance */
#define FCP_PTA_MASK 7 /* mask for task attribute field */
#define FCP_PRI_SHIFT 3 /* priority field starts in bit 3 */
#define FCP_PRI_RESVD_MASK 0x80 /* reserved bits in priority field */
@@ -3814,12 +3814,12 @@ void qla_tgt_async_event(uint16_t code, struct scsi_qla_host *vha, uint16_t *mai
case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
case MBA_WAKEUP_THRES: /* Request Queue Wake-up. */
ql_dbg(ql_dbg_tgt_mgt, vha, 0xe141, "qla_target(%d): System error async event %#x "
- "occured", vha->vp_idx, code);
+ "occurred", vha->vp_idx, code);
break;
case MBA_LOOP_UP:
{
- ql_dbg(ql_dbg_tgt_mgt, vha, 0xe142, "qla_target(%d): Async LOOP_UP occured "
+ ql_dbg(ql_dbg_tgt_mgt, vha, 0xe142, "qla_target(%d): Async LOOP_UP occurred "
"(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
@@ -3835,7 +3835,7 @@ void qla_tgt_async_event(uint16_t code, struct scsi_qla_host *vha, uint16_t *mai
case MBA_LOOP_DOWN:
case MBA_LIP_RESET:
case MBA_RSCN_UPDATE:
- ql_dbg(ql_dbg_tgt_mgt, vha, 0xe143, "qla_target(%d): Async event %#x occured "
+ ql_dbg(ql_dbg_tgt_mgt, vha, 0xe143, "qla_target(%d): Async event %#x occurred "
"(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
code, le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
@@ -3843,7 +3843,7 @@ void qla_tgt_async_event(uint16_t code, struct scsi_qla_host *vha, uint16_t *mai
case MBA_PORT_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xe144, "qla_target(%d): Port update async event %#x "
- "occured: updating the ports database (m[1]=%x, m[2]=%x, "
+ "occurred: updating the ports database (m[1]=%x, m[2]=%x, "
"m[3]=%x, m[4]=%x)", vha->vp_idx, code,
le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
@@ -3855,7 +3855,7 @@ void qla_tgt_async_event(uint16_t code, struct scsi_qla_host *vha, uint16_t *mai
break;
default:
- ql_dbg(ql_dbg_tgt_mgt, vha, 0xe147, "qla_target(%d): Async event %#x occured: "
+ ql_dbg(ql_dbg_tgt_mgt, vha, 0xe147, "qla_target(%d): Async event %#x occurred: "
"ignore (m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)",
vha->vp_idx, code,
le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 6dd8102..2a30c5a 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -363,7 +363,7 @@ struct se_node_acl *tcm_qla2xxx_alloc_fabric_acl(struct se_portal_group *se_tpg)
nacl = kzalloc(sizeof(struct tcm_qla2xxx_nacl), GFP_KERNEL);
if (!nacl) {
- pr_err("Unable to alocate struct tcm_qla2xxx_nacl\n");
+ pr_err("Unable to allocate struct tcm_qla2xxx_nacl\n");
return NULL;
}
@@ -1511,7 +1511,7 @@ static int tcm_qla2xxx_check_initiator_node_acl(
return PTR_ERR(se_sess);
}
/*
- * Format the FCP Initiator port_name into colon seperated values to match
+ * Format the FCP Initiator port_name into colon separated values to match
* the format by tcm_qla2xxx explict ConfigFS NodeACLs.
*/
memset(&port_name, 0, 36);
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
index 41730ed..3e9ee43 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
@@ -3,7 +3,7 @@
#define TCM_QLA2XXX_VERSION "v0.1"
/* length of ASCII WWPNs including pad */
#define TCM_QLA2XXX_NAMELEN 32
-/* lenth of ASCII NPIV 'WWPN+WWNN' including pad */
+/* length of ASCII NPIV 'WWPN+WWNN' including pad */
#define TCM_QLA2XXX_NPIV_NAMELEN 66
#include "qla_target.h"
--
1.7.10.128.g7945c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/