Re: [PATCH 4/6] ce4100: Add errata fixes for UART on CE4100

From: Thomas Gleixner
Date: Thu Nov 11 2010 - 06:34:46 EST




On Tue, 9 Nov 2010, dirk.brandewie@xxxxxxxxx wrote:

> From: Dirk Brandewie <dirk.brandewie@xxxxxxxxx>
>
> This patch enables the UART on the CE4100. The UART has a couple of
> issues that need to be worked around. First the UART is mostly PC
> compatible except that it is clocked eight times faster than a
> standard PC so the default configuration provided in
> arch/x86/include/asm/serial.h needs to be overridden. Second the TX
> interrupt may not be set correctly all the time. Lastly accessing the
> UART via I/O space for early_prink() hangs the chip when the IOAPIC is
> enabled.
>
> A custom mem_serial_in() is provided to work around the TX interrupt
> issue. The configuration issues are dealt with in the call back
> registered with the 8250 driver via serial8250_set_isa_configurator()
>
> Signed-off-by: Dirk Brandewie <dirk.brandewie@xxxxxxxxx>
> ---
> arch/x86/kernel/ce4100.c | 92 ++++++++++++++++++++++++++++++++++++++++++++-
> 1 files changed, 89 insertions(+), 3 deletions(-)
>
> diff --git a/arch/x86/kernel/ce4100.c b/arch/x86/kernel/ce4100.c
> index b8f1c48..d2c0d51 100644
> --- a/arch/x86/kernel/ce4100.c
> +++ b/arch/x86/kernel/ce4100.c
> @@ -12,25 +12,111 @@
> #include <linux/kernel.h>
> #include <linux/irq.h>
> #include <linux/module.h>
> +#include <linux/serial_reg.h>
> +#include <linux/serial_8250.h>
>
> #include <asm/setup.h>
> -
> +#include <asm/io.h>
>
> static int ce4100_i8042_detect(void)
> {
> return 0;
> }
>
> -static void __init sdv_arch_setup(void)
> +static void __init sdv_find_smp_config(void)
> {
> +}
> +
> +#ifdef CONFIG_SERIAL_8250
> +
>
> +static unsigned int mem_serial_in(struct uart_port *p, int offset)
> +{
> + offset = offset << p->regshift;
> + return readl(p->membase + offset);
> }
>
> +/*
> + * The UART Tx interrupts are not set under some conditions and therefore serial
> + * transmission hangs. This is a silicon issue and has not been root caused. The
> + * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT
> + * bit of LSR register in interrupt handler to see whether at least one of these
> + * two bits is set, if so then process the transmit request. If this workaround
> + * is not applied, then the serial transmission may hang. This workaround is for
> + * errata number 9 in Errata - B step.
> +*/
>
> -static void __init sdv_find_smp_config(void)
> +static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset)
> +{
> + unsigned int ret, ier, lsr;
> +
> + if (offset == UART_IIR) {
> + offset = offset << p->regshift;
> + ret = readl(p->membase + offset);
> + if (ret & UART_IIR_NO_INT) {
> + /* see if the TX interrupt should have really set */
> + ier = mem_serial_in(p, UART_IER);
> + /* see if the UART's XMIT interrupt is enabled */
> + if (ier & UART_IER_THRI) {
> + lsr = mem_serial_in(p, UART_LSR);
> + /* now check to see if the UART should be
> + generating an interrupt (but isn't) */
> + if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
> + ret &= ~UART_IIR_NO_INT;
> + }
> + }
> + } else
> + ret = mem_serial_in(p, offset);
> + return ret;
> +}
> +
> +static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value)
> +{
> + offset = offset << p->regshift;
> + writel(value, p->membase + offset);
> +}
> +
> +static void ce4100_serial_fixup(int port, struct uart_port *up,
> + unsigned short *capabilites)
> +{
> +#ifdef CONFIG_EARLY_PRINTK
> + /*
> + * Over ride the legacy port configuration that comes from
> + * asm/serial.h. Using the ioport driver then switching to the
> + * PCI memmaped driver hangs the IOAPIC
> + */
> + if (up->iotype != UPIO_MEM32) {
> + up->uartclk = 14745600;
> + up->mapbase = 0xdffe0200;

What does the uartclk, mapbase fixups in the CONFIG_EARLY_PRINTK=n case ?

> + set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
> + up->mapbase & PAGE_MASK);
> + up->membase =
> + (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
> + up->membase += up->mapbase & ~PAGE_MASK;
> + up->iotype = UPIO_MEM32;
> + up->regshift = 2;
> + }
> +#endif
> + up->iobase = 0;
> + up->serial_in = ce4100_mem_serial_in;
> + up->serial_out = ce4100_mem_serial_out;
> +
> + *capabilites |= (1 << 12);
> +}

Thanks,

tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/