Re: Workaround hardware bug addressing physical memory

[Unai Uribarri]

----- "Marin Mitov" <mitov@xxxxxxxxxxx> wrote:

| On 15.7.2010, Unai Uribarri wrote:
| > Thanks.
| > ----- "Marin Mitov" <mitov@xxxxxxxxxxx> wrote:
| > 
| > | On Wednesday, July 14, 2010 08:06:49 pm you wrote:
| > | > ----- "Marin Mitov" <mitov@xxxxxxxxxxx> wrote:
| > | > 
| > | > | Hi,
| > | > | 
| > | > | This is pci driver. You can set dma mask:
| > | > | 
| > | > | dma_set_coheren_mask(pdev, DMA_BIT_MASK(31)) 
| > | > | 
| > | > | All further alloc_coherent() should be from the region 0-2GB.
| > | > | 
| > | > 
| > | > But I'm using a 64 bit operating system with 32GB of RAM. It's
| a
| > | > pity to be unable to use 4GB-32GB range because the 2-4GB range
| is
| > | > unusable. So I've written this code to skip invalid areas. Do
| you
| > | > think this code could be useful for other drivers?
| > | 
| > | Let me summarize if I have correctly understood what you do.
| > | 
| > | First, your hardware has problems when the physical (bus) address
| > | is out of the 0-2GB region, so you cannot use buffers that are out
| 
| > | of this range in any case. And the defect is in the peripheral,
| not in
| > | the bridge between it and the memory.
| > 
| > The hardware works correctly for physical address in the ranges 0 to
| 2GB
| > AND 4GB to 32GB. Physical address in the 2-4GB range are read
| correctly
| > by the device. But when the device tries to write to them it issues
| 
| > invalid PCIe transaction headers: it tries to access such addresses
| using
| > a 64-bit transactions when the PCI Express standard mandates to use
| 32-bit
| > transactions for memory addresses below 4GB. Some bridges accept
| such
| > invalid transactions, but Intel 5500 chipset rejects them.
| > 
| > I'm allocating 256MB of RAM for I/O buffers; I'm fear that
| restricting all
| > the allocations to the first 2GB of memory will put too much
| pressure in
| > that zone of memory. But restricting it to 4GB and above will be
| okay. 
| > 
| > Is there any way to restrict to memory address above 4GB?
| 
| Would this work for you?
| From: Documentation/kernel-parameters.txt:
| 
| 	memmap=nn[KMG]$ss[KMG]
| 			[KNL,ACPI] Mark specific memory as reserved.
| 			Region of memory to be used, from ss to ss+nn.
| 			Example: Exclude memory from 0x18690000-0x1869ffff
| 			         memmap=64K$0x18690000
| 			         or
| 			         memmap=0x10000$0x18690000

I think that linking in a list the unusable memory and freeing it after completing all the allocations is a better solution.

Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/