[PATCH 13/13] ARM: RFC: PL08x platform data for the ARM Versatile platforms

From: Linus Walleij
Date: Fri Jun 11 2010 - 11:28:47 EST


This adds platform data for the Versatile. I have no such hardware
to test on but I'm implementing in the blue according to spec in
the hopes that someone will help me out in debugging and testing
it.

Cc: Peter Pearse <peter.pearse@xxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
---
arch/arm/mach-versatile/core.c | 525 ++++++++++++++++++++++-
arch/arm/mach-versatile/include/mach/platform.h | 6 +
arch/arm/mach-versatile/versatile_pb.c | 17 +-
3 files changed, 543 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 3dff864..bc90434 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,6 +28,8 @@
#include <linux/amba/clcd.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
+#include <linux/amba/serial.h>
+#include <linux/amba/pl08x.h>
#include <linux/io.h>
#include <linux/gfp.h>

@@ -38,6 +40,7 @@
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <asm/hardware/vic.h>
+#include <asm/hardware/pl080.h>
#include <asm/mach-types.h>

#include <asm/mach/arch.h>
@@ -352,6 +355,11 @@ static struct mmci_platform_data mmc0_plat_data = {
.status = mmc_status,
.gpio_wp = -1,
.gpio_cd = -1,
+#ifdef CONFIG_AMBA_PL08X
+ .dma_filter = pl08x_filter_id,
+ .dma_rx_param = (void *) "mci0",
+ /* Don't specify a TX channel, this RX channel is bidirectional */
+#endif
};

/*
@@ -693,6 +701,490 @@ static struct clcd_board clcd_plat_data = {
.remove = versatile_clcd_remove,
};

+/*
+ * DMA config
+ * The DMA channel routing is static on the PA926EJ-S
+ * and dynamic on the PB926EJ-S using SYS_DMAPSR0..SYS_DMAPSR2
+ */
+#ifdef CONFIG_AMBA_PL08X
+
+struct pb926ejs_dma_signal {
+ unsigned int id;
+ struct pl08x_dma_chan *user;
+ u32 ctrlreg;
+};
+
+/*
+ * The three first channels on ARM926EJ-S are muxed,
+ * but to make things simple we enable all channels
+ * to be muxed, however most of the channels will just
+ * me muxed on top of themselves.
+ */
+static struct pb926ejs_dma_signal pl080_muxtab[] = {
+ [0] = {
+ .id = 0,
+ .ctrlreg = VERSATILE_SYS_DMAPSR0,
+ },
+ [1] = {
+ .id = 1,
+ .ctrlreg = VERSATILE_SYS_DMAPSR1,
+ },
+ [2] = {
+ .id = 2,
+ .ctrlreg = VERSATILE_SYS_DMAPSR2,
+ },
+ [3] = {
+ .id = 3,
+ },
+ [4] = {
+ .id = 4,
+ },
+ [5] = {
+ .id = 5,
+ },
+ [6] = {
+ .id = 6,
+ },
+ [7] = {
+ .id = 7,
+ },
+ [8] = {
+ .id = 8,
+ },
+ [9] = {
+ .id = 9,
+ },
+ [10] = {
+ .id = 10,
+ },
+ [11] = {
+ .id = 11,
+ },
+ [12] = {
+ .id = 12,
+ },
+ [13] = {
+ .id = 13,
+ },
+ [14] = {
+ .id = 14,
+ },
+ [15] = {
+ .id = 15,
+ },
+};
+
+/* This is a lock for the above muxing array */
+static spinlock_t muxlock = SPIN_LOCK_UNLOCKED;
+
+static int pl080_get_signal(struct pl08x_dma_chan *ch)
+{
+ struct pl08x_channel_data *cd = ch->cd;
+
+ printk(KERN_INFO "requesting DMA signal on channel %s\n", ch->name);
+
+ /*
+ * The AB926EJ-S is simple - only static assignments
+ * so the channel is already muxed in and ready to go.
+ */
+ if (machine_is_versatile_ab())
+ return cd->min_signal;
+
+ /* The PB926EJ-S is hairier */
+ if (machine_is_versatile_pb()) {
+ unsigned long flags;
+ int i;
+
+ if (cd->min_signal > ARRAY_SIZE(pl080_muxtab) ||
+ cd->max_signal > ARRAY_SIZE(pl080_muxtab) ||
+ (cd->max_signal < cd->min_signal)) {
+ printk(KERN_ERR "%s: illegal muxing constraints for %s\n",
+ __func__, ch->name);
+ return -EINVAL;
+ }
+ /* Try to find a signal to use */
+ spin_lock_irqsave(&muxlock, flags);
+ for (i = cd->min_signal; i <= cd->max_signal; i++) {
+ if (!pl080_muxtab[i].user) {
+ u32 val;
+
+ pl080_muxtab[i].user = ch;
+ /* If the channels need to be muxed in, mux them! */
+ if (pl080_muxtab[i].ctrlreg) {
+ val = readl(__io_address(pl080_muxtab[i].ctrlreg));
+ val &= 0xFFFFFF70U;
+ val |= 0x80; /* Turn on muxing */
+ val |= cd->muxval; /* Mux in the right peripheral */
+ writel(val, __io_address(pl080_muxtab[i].ctrlreg));
+ printk(KERN_INFO "%s: muxing in %s at channel %d writing value "
+ "%08x to register %08x\n",
+ __func__, ch->name, i,
+ val, pl080_muxtab[i].ctrlreg);
+ }
+ spin_unlock_irqrestore(&muxlock, flags);
+ return pl080_muxtab[i].id;
+ }
+ }
+ spin_unlock_irqrestore(&muxlock, flags);
+ }
+
+ return -EBUSY;
+}
+
+static void pl080_put_signal(struct pl08x_dma_chan *ch)
+{
+ struct pl08x_channel_data *cd = ch->cd;
+ unsigned long flags;
+ int i;
+
+ printk(KERN_INFO "releasing DMA signal on channel %s\n", ch->name);
+ if (cd->min_signal > ARRAY_SIZE(pl080_muxtab) ||
+ cd->max_signal > ARRAY_SIZE(pl080_muxtab) ||
+ (cd->max_signal < cd->min_signal)) {
+ printk(KERN_INFO "%s: illegal muxing constraints for %s\n",
+ __func__, ch->name);
+ return;
+ }
+ spin_lock_irqsave(&muxlock, flags);
+ for (i = cd->min_signal; i <= cd->max_signal; i++) {
+ if (pl080_muxtab[i].user == ch) {
+ pl080_muxtab[i].user = NULL;
+ if (pl080_muxtab[i].ctrlreg) {
+ u32 val;
+
+ val = readl(__io_address(pl080_muxtab[i].ctrlreg));
+ val &= 0xFFFFFF70U; /* Disable, select no channel */
+ writel(val, __io_address(pl080_muxtab[i].ctrlreg));
+ printk(KERN_INFO "%s: muxing out %s at channel %d writing value "
+ "%08x to register %08x\n",
+ __func__, ch->name, i,
+ val, pl080_muxtab[i].ctrlreg);
+ }
+ spin_unlock_irqrestore(&muxlock, flags);
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&muxlock, flags);
+ printk(KERN_INFO "%s: unable to release muxing on channel %s\n",
+ __func__, ch->name);
+}
+
+struct pl08x_platform_data pl080_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ /*
+ * We pass in some optimal memcpy config, the
+ * driver will augment it if need be. 256 byte
+ * bursts and 32bit bus width.
+ */
+ .cctl =
+ (PL080_BSIZE_256 << PL080_CONTROL_SB_SIZE_SHIFT | \
+ PL080_BSIZE_256 << PL080_CONTROL_DB_SIZE_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+ PL080_CONTROL_PROT_BUFF | \
+ PL080_CONTROL_PROT_CACHE | \
+ PL080_CONTROL_PROT_SYS),
+ /* Flow control: DMAC controls this */
+ .ccfg = PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ .get_signal = pl080_get_signal,
+ .put_signal = pl080_put_signal,
+ .bus_bit_lli = 0,
+};
+
+#define PRIMECELL_DEFAULT_CCTL (PL080_BSIZE_8 << PL080_CONTROL_SB_SIZE_SHIFT | \
+ PL080_BSIZE_8 << PL080_CONTROL_DB_SIZE_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+ PL080_CONTROL_PROT_SYS)
+
+static struct pl08x_channel_data ab926ejs_chan_data[] = {
+ [0] = {
+ .bus_id = "aacirx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [1] = {
+ .bus_id = "aacitx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [2] = {
+ .bus_id = "mci0",
+ .min_signal = 2,
+ .max_signal = 2,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ },
+ [3] = {
+ .bus_id = "reserved",
+ .min_signal = 3,
+ .max_signal = 3,
+ },
+ [4] = {
+ .bus_id = "reserved",
+ .min_signal = 4,
+ .max_signal = 4,
+ },
+ [5] = {
+ .bus_id = "reserved",
+ .min_signal = 5,
+ .max_signal = 5,
+ },
+ [6] = {
+ .bus_id = "scirx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [7] = {
+ .bus_id = "scitx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [8] = {
+ .bus_id = "ssprx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [9] = {
+ .bus_id = "ssptx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [10] = {
+ .bus_id = "uart2rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [11] = {
+ .bus_id = "uart2tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [12] = {
+ .bus_id = "uart1rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [13] = {
+ .bus_id = "uart1tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [14] = {
+ .bus_id = "uart0rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [15] = {
+ .bus_id = "uart0tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+};
+
+/* For the PB926EJ-S we define some extra virtual channels */
+static struct pl08x_channel_data pb926ejs_chan_data[] = {
+ [0] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "aacitx",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x00,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [1] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "aacirx",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x01,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [2] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "usba",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x02,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ },
+ [3] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "usbb",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x03,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ },
+ [4] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "mci0",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x04,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ },
+ [5] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "mci1",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x05,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ },
+ [6] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "uart3tx",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x06,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [7] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "uart3rx",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x07,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [8] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "sciinta",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x08,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ },
+ [9] = {
+ /* Muxed on channel 0-3 */
+ .bus_id = "sciintb",
+ .min_signal = 0,
+ .max_signal = 2,
+ .muxval = 0x09,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ },
+ [10] = {
+ .bus_id = "scirx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [11] = {
+ .bus_id = "scitx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [12] = {
+ .bus_id = "ssprx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [13] = {
+ .bus_id = "ssptx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [14] = {
+ .bus_id = "uart2rx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [15] = {
+ .bus_id = "uart2tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [16] = {
+ .bus_id = "uart1rx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [17] = {
+ .bus_id = "uart1tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [18] = {
+ .bus_id = "uart0rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+ [19] = {
+ .bus_id = "uart0tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .cctl = PRIMECELL_DEFAULT_CCTL,
+ .ccfg = PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT,
+ },
+};
+
+static void __init pl080_fixup(void)
+{
+ if (machine_is_versatile_ab()) {
+ pl080_plat_data.slave_channels = ab926ejs_chan_data;
+ pl080_plat_data.num_slave_channels = ARRAY_SIZE(ab926ejs_chan_data);
+ }
+ if (machine_is_versatile_pb()) {
+ pl080_plat_data.slave_channels = pb926ejs_chan_data;
+ pl080_plat_data.num_slave_channels = ARRAY_SIZE(pb926ejs_chan_data);
+ }
+}
+#else
+static struct pl08x_platform_data pl080_plat_data = {
+};
+
+static void __init pl080_fixup(void)
+{
+}
+#endif
+
static struct pl061_platform_data gpio0_plat_data = {
.gpio_base = 0,
.irq_base = IRQ_GPIO0_START,
@@ -703,6 +1195,30 @@ static struct pl061_platform_data gpio1_plat_data = {
.irq_base = IRQ_GPIO1_START,
};

+static struct amba_pl011_data uart0_plat_data = {
+#ifdef CONFIG_AMBA_PL08X
+ .dma_filter = pl08x_filter_id,
+ .dma_rx_param = (void *) "uart0rx",
+ .dma_tx_param = (void *) "uart0tx",
+#endif
+};
+
+static struct amba_pl011_data uart1_plat_data = {
+#ifdef CONFIG_AMBA_PL08X
+ .dma_filter = pl08x_filter_id,
+ .dma_rx_param = (void *) "uart1rx",
+ .dma_tx_param = (void *) "uart1tx",
+#endif
+};
+
+static struct amba_pl011_data uart2_plat_data = {
+#ifdef CONFIG_AMBA_PL08X
+ .dma_filter = pl08x_filter_id,
+ .dma_rx_param = (void *) "uart2rx",
+ .dma_tx_param = (void *) "uart2tx",
+#endif
+};
+
#define AACI_IRQ { IRQ_AACI, NO_IRQ }
#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -762,16 +1278,16 @@ AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
AMBA_DEVICE(smc, "dev:00", SMC, NULL);
AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL);
AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
+AMBA_DEVICE(dmac, "dev:30", DMAC, &pl080_plat_data);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
+AMBA_DEVICE(uart0, "dev:f1", UART0, &uart0_plat_data);
+AMBA_DEVICE(uart1, "dev:f2", UART1, &uart1_plat_data);
+AMBA_DEVICE(uart2, "dev:f3", UART2, &uart2_plat_data);
AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL);

static struct amba_device *amba_devs[] __initdata = {
@@ -843,6 +1359,7 @@ void __init versatile_init(void)
platform_device_register(&versatile_flash_device);
platform_device_register(&versatile_i2c_device);
platform_device_register(&smc91x_device);
+ pl080_fixup();

for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index ec08740..fa0907c 100644
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -86,6 +86,9 @@
#define VERSATILE_SYS_BOOTCS_OFFSET 0x58
#define VERSATILE_SYS_24MHz_OFFSET 0x5C
#define VERSATILE_SYS_MISC_OFFSET 0x60
+#define VERSATILE_SYS_DMAPSR0_OFFSET 0x64 /* Only on PB926EJ-S */
+#define VERSATILE_SYS_DMAPSR1_OFFSET 0x68 /* Only on PB926EJ-S */
+#define VERSATILE_SYS_DMAPSR2_OFFSET 0x6C /* Only on PB926EJ-S */
#define VERSATILE_SYS_TEST_OSC0_OFFSET 0x80
#define VERSATILE_SYS_TEST_OSC1_OFFSET 0x84
#define VERSATILE_SYS_TEST_OSC2_OFFSET 0x88
@@ -124,6 +127,9 @@
#define VERSATILE_SYS_BOOTCS (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
#define VERSATILE_SYS_24MHz (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
#define VERSATILE_SYS_MISC (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
+#define VERSATILE_SYS_DMAPSR0 (VERSATILE_SYS_BASE + VERSATILE_SYS_DMAPSR0_OFFSET) /* Only on PB926EJ-S */
+#define VERSATILE_SYS_DMAPSR1 (VERSATILE_SYS_BASE + VERSATILE_SYS_DMAPSR1_OFFSET) /* Only on PB926EJ-S */
+#define VERSATILE_SYS_DMAPSR2 (VERSATILE_SYS_BASE + VERSATILE_SYS_DMAPSR2_OFFSET) /* Only on PB926EJ-S */
#define VERSATILE_SYS_TEST_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
#define VERSATILE_SYS_TEST_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
#define VERSATILE_SYS_TEST_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 239cd30..ecb6bf6 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -25,6 +25,8 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
+#include <linux/amba/serial.h>
+#include <linux/amba/pl08x.h>
#include <linux/io.h>

#include <mach/hardware.h>
@@ -46,6 +48,11 @@ static struct mmci_platform_data mmc1_plat_data = {
.status = mmc_status,
.gpio_wp = -1,
.gpio_cd = -1,
+#ifdef CONFIG_AMBA_PL08X
+ .dma_filter = pl08x_filter_id,
+ .dma_rx_param = (void *) "mci1",
+ /* Don't specify a TX channel, this RX channel is bidirectional */
+#endif
};

static struct pl061_platform_data gpio2_plat_data = {
@@ -58,6 +65,14 @@ static struct pl061_platform_data gpio3_plat_data = {
.irq_base = IRQ_GPIO3_START,
};

+static struct amba_pl011_data uart3_plat_data = {
+#ifdef CONFIG_AMBA_PL08X
+ .dma_filter = pl08x_filter_id,
+ .dma_rx_param = (void *) "uart3rx",
+ .dma_tx_param = (void *) "uart3tx",
+#endif
+};
+
#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ }
#define UART3_DMA { 0x86, 0x87 }
#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ }
@@ -78,7 +93,7 @@ static struct pl061_platform_data gpio3_plat_data = {
*/

/* FPGA Primecells */
-AMBA_DEVICE(uart3, "fpga:09", UART3, NULL);
+AMBA_DEVICE(uart3, "fpga:09", UART3, &uart3_plat_data);
AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL);
AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);

--
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/