Re: [PATCH] x86/sfi: fix ioapic gsi range

From: Eric W. Biederman
Date: Tue Jun 08 2010 - 15:42:09 EST


jacob pan <jacob.jun.pan@xxxxxxxxxxxxxxx> writes:

>> > Background:
>> > In Moorestown/Medfield platforms, there is no legacy IRQs, all gsis
>> > and irqs are one to one mapped, including those < 16. Specifically,
>> > IRQ0 and IRQ1 are used for per-cpu timers. So without this patch,
>> > IOAPIC pin to IRQ mapping is off by one.
>>
>> The patch looks mostly reasonable the comment is wrong.
>>
>> You may not use a 1-1 mapping if you don't have legacy irqs. Linux
>> irqs 0-15 are the ISA irqs you may not use those irq numbers for
>> something different on any architecture, but especially not on x86.
>> The gsi numbers are firmware specific and you may treat however you
>> want.
>
> [jacob pan] If we don't have ISA irqs, why can't we have gsi# = irq#
> for the legacy IRQ range? On Moorestown, we are re-using legacy irqs.
> e.g.
> sh-4.0# cat /proc/interrupts
> CPU0 CPU1
> 0: 1512 0 IO-APIC-edge apbt0
> 1: 0 1482 IO-APIC-edge apbt1
> 9: 0 0 IO-APIC-fasteoi dw_spi
> 10: 0 0 IO-APIC-fasteoi mrst_i2c
> 11: 0 0 IO-APIC-fasteoi mrst_i2c
> 12: 0 0 IO-APIC-fasteoi mrst_i2c
> 23: 0 0 IO-APIC-fasteoi intel_scu_ipc
> 27: 21 0 IO-APIC-fasteoi

At the ioapic and gsi level, and in your firmware interface reusing the
numbers is fine.

The issue is what acpi calls bus 0 irqs, and how drivers deal with
them. We wind up having well know irqs: irqs 3 and 4 for serial ports,
irq 7 for parallel ports. irqs 14, and 15 for ide.

A bunch of these hardware devices we can get if someone connects up a
lpc superio chip.

Even if sfi is never implemented on a platform where that kind of
hardware exists, the current sfi code is setup to coexist
simultaneously in the kernel with all of the infrastructure of other
platforms where those kinds of devices exist. Which means there can
be drivers compiled into your kernel that make assumptions about special
properties of the irqs 0-15.

I have seen a lot of weird hard to track issues, because of a conflict in
assumptions over the ISA irqs. It is easiest and safest just to let the
first 16 linux irq numbers be reserved for the legacy oddness, so code can
make assumptions and we don't have to worry about it.

As for the question about using legacy_pic to detect the absence of an irq
controller that Peter raised. We can't do that because it should be possible
for an acpi system with all of the legacy hardware to exist without needing
to implement an i8259, or ever run in the historical interrupt delivery mode
of pcs.

With the current code you should get all of the remapping of the gsi's out
of the legacy irq space without needing to lift a finger, and if someone later
decides we need an irq override so we can have an isa irq present on a weird
embedded system on a chip the code will be able to handle that easily.

Eric
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/