Re: [PATCH] drivers/media/dvb/dvb-usb/dib0700: fix return values

From: Devin Heitmueller
Date: Sun May 23 2010 - 22:35:16 EST


On Wed, May 19, 2010 at 6:46 AM, Daniel Mack <daniel@xxxxxxxx> wrote:
> Propagte correct error values instead of returning -1 which just means
> -EPERM ("Permission denied")
>
> While at it, also fix some coding style violations.
>
> Signed-off-by: Daniel Mack <daniel@xxxxxxxx>
> Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
> Cc: Jiri Slaby <jslaby@xxxxxxx>
> Cc: Dmitry Torokhov <dtor@xxxxxxx>
> Cc: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
> Cc: linux-media@xxxxxxxxxxxxxxx
> ---
>  drivers/media/dvb/dvb-usb/dib0700_core.c |   82 +++++++++++++++--------------
>  1 files changed, 42 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
> index 4f961d2..45aec3a 100644
> --- a/drivers/media/dvb/dvb-usb/dib0700_core.c
> +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
> @@ -53,7 +53,7 @@ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
>        int status;
>
>        deb_data(">>> ");
> -       debug_dump(tx,txlen,deb_data);
> +       debug_dump(tx, txlen, deb_data);
>
>        status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0),
>                tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen,
> @@ -98,7 +98,7 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
>                deb_info("ep 0 read error (status = %d)\n",status);
>
>        deb_data("<<< ");
> -       debug_dump(rx,rxlen,deb_data);
> +       debug_dump(rx, rxlen, deb_data);
>
>        return status; /* length in case of success */
>  }
> @@ -106,28 +106,29 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
>  int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
>  {
>        u8 buf[3] = { REQUEST_SET_GPIO, gpio, ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6) };
> -       return dib0700_ctrl_wr(d,buf,3);
> +       return dib0700_ctrl_wr(d, buf, sizeof(buf));
>  }
>
>  static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
>  {
> -    struct dib0700_state *st = d->priv;
> -    u8 b[3];
> -    int ret;
> -
> -    if (st->fw_version >= 0x10201) {
> -       b[0] = REQUEST_SET_USB_XFER_LEN;
> -       b[1] = (nb_ts_packets >> 8)&0xff;
> -       b[2] = nb_ts_packets & 0xff;
> -
> -       deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
> -
> -       ret = dib0700_ctrl_wr(d, b, 3);
> -    } else {
> -       deb_info("this firmware does not allow to change the USB xfer len\n");
> -       ret = -EIO;
> -    }
> -    return ret;
> +       struct dib0700_state *st = d->priv;
> +       u8 b[3];
> +       int ret;
> +
> +       if (st->fw_version >= 0x10201) {
> +               b[0] = REQUEST_SET_USB_XFER_LEN;
> +               b[1] = (nb_ts_packets >> 8) & 0xff;
> +               b[2] = nb_ts_packets & 0xff;
> +
> +               deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
> +
> +               ret = dib0700_ctrl_wr(d, b, 3);
> +       } else {
> +               deb_info("this firmware does not allow to change the USB xfer len\n");
> +               ret = -EIO;
> +       }
> +
> +       return ret;
>  }
>
>  /*
> @@ -178,7 +179,8 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
>                        value = ((en_start << 7) | (en_stop << 6) |
>                                 (msg[i].len & 0x3F)) << 8 | i2c_dest;
>                        /* I2C ctrl + FE bus; */
> -                       index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
> +                       index = ((gen_mode << 6) & 0xC0) |
> +                               ((bus_mode << 4) & 0x30);
>
>                        result = usb_control_msg(d->udev,
>                                                 usb_rcvctrlpipe(d->udev, 0),
> @@ -198,11 +200,12 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
>                } else {
>                        /* Write request */
>                        buf[0] = REQUEST_NEW_I2C_WRITE;
> -                       buf[1] = (msg[i].addr << 1);
> +                       buf[1] = msg[i].addr << 1;
>                        buf[2] = (en_start << 7) | (en_stop << 6) |
>                                (msg[i].len & 0x3F);
>                        /* I2C ctrl + FE bus; */
> -                       buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
> +                       buf[3] = ((gen_mode << 6) & 0xC0) |
> +                                ((bus_mode << 4) & 0x30);
>                        /* The Actual i2c payload */
>                        memcpy(&buf[4], msg[i].buf, msg[i].len);
>
> @@ -240,7 +243,7 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
>
>        for (i = 0; i < num; i++) {
>                /* fill in the address */
> -               buf[1] = (msg[i].addr << 1);
> +               buf[1] = msg[i].addr << 1;
>                /* fill the buffer */
>                memcpy(&buf[2], msg[i].buf, msg[i].len);
>
> @@ -368,7 +371,8 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
>        u8 buf[260];
>
>        while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
> -               deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",hx.addr, hx.len, hx.chk);
> +               deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",
> +                               hx.addr, hx.len, hx.chk);
>
>                buf[0] = hx.len;
>                buf[1] = (hx.addr >> 8) & 0xff;
> @@ -408,16 +412,16 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
>                                  REQUEST_GET_VERSION,
>                                  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
>                                  b, sizeof(b), USB_CTRL_GET_TIMEOUT);
> -       fw_version = (b[8] << 24)  | (b[9] << 16)  | (b[10] << 8) | b[11];
> +       fw_version = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
>
>        /* set the buffer size - DVB-USB is allocating URB buffers
>         * only after the firwmare download was successful */
>        for (i = 0; i < dib0700_device_count; i++) {
>                for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
>                                adap_num++) {
> -                       if (fw_version >= 0x10201)
> +                       if (fw_version >= 0x10201) {
>                                dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
> -                       else {
> +                       } else {
>                                /* for fw version older than 1.20.1,
>                                 * the buffersize has to be n times 512 */
>                                dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
> @@ -453,7 +457,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
>        if (st->disable_streaming_master_mode == 1)
>                b[2] = 0x00;
>        else
> -               b[2] = (0x01 << 4); /* Master mode */
> +               b[2] = 0x01 << 4; /* Master mode */
>
>        b[3] = 0x00;
>
> @@ -466,7 +470,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
>
>        b[2] |= st->channel_state;
>
> -       deb_info("data for streaming: %x %x\n",b[1],b[2]);
> +       deb_info("data for streaming: %x %x\n", b[1], b[2]);
>
>        return dib0700_ctrl_wr(adap->dev, b, 4);
>  }
> @@ -631,7 +635,7 @@ resubmit:
>  int dib0700_rc_setup(struct dvb_usb_device *d)
>  {
>        struct dib0700_state *st = d->priv;
> -       u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
> +       u8 rc_setup[3] = { REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0 };
>        struct urb *purb;
>        int ret;
>        int i;
> @@ -640,10 +644,10 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
>                return 0;
>
>        /* Set the IR mode */
> -       i = dib0700_ctrl_wr(d, rc_setup, 3);
> -       if (i<0) {
> +       i = dib0700_ctrl_wr(d, rc_setup, sizeof(rc_setup));
> +       if (i < 0) {
>                err("ir protocol setup failed");
> -               return -1;
> +               return i;
>        }
>
>        if (st->fw_version < 0x10200)
> @@ -653,14 +657,14 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
>        purb = usb_alloc_urb(0, GFP_KERNEL);
>        if (purb == NULL) {
>                err("rc usb alloc urb failed\n");
> -               return -1;
> +               return -ENOMEM;
>        }
>
>        purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
>        if (purb->transfer_buffer == NULL) {
>                err("rc kzalloc failed\n");
>                usb_free_urb(purb);
> -               return -1;
> +               return -ENOMEM;
>        }
>
>        purb->status = -EINPROGRESS;
> @@ -669,12 +673,10 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
>                          dib0700_rc_urb_completion, d);
>
>        ret = usb_submit_urb(purb, GFP_ATOMIC);
> -       if (ret != 0) {
> +       if (ret)
>                err("rc submit urb failed\n");
> -               return -1;
> -       }
>
> -       return 0;
> +       return ret;
>  }
>
>  static int dib0700_probe(struct usb_interface *intf,
> --
> 1.7.1

Hello Daniel,

I am not against any of these changes in principle, but you should not
be mixing functional changes with codingstyle fixes. It results in a
situation where as a reviewer I have to scrutinize every line *very*
closely to determine whether it's an actual change or just a
codingstyle fix.

In other words, split this into two patches.

Thanks,

Devin

--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/