Re: Weird suspend/resume problem on HP nx6325 w/ openSUSE 11.2 w/ -rc8

[Dave Airlie]

On Sun, Nov 22, 2009 at 9:15 AM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> Hi,
>
> I'm not really sure where this should be reported, but here it goes.
>
> After installing openSUSE 11.2 on my testbed nx6325 I noticed that resume
> (from suspend to RAM) stopped working on it.  Apparently, it hanged while
> switching from the console back to X and the box remained completely
> unresponsive after that (it didn't even react to the magic sysrq).  However,
> it used to work just fine with -rc7 and openSUSE 11.1, so I figured the problem
> was related to the new X driver, which is radeon module version 6.12.4 (xorg
> server 1.6.5).
>
> So, I started to investigate and found that after a suspend from a framebuffer
> console, the resume had always worked.  However, when I switched from X to the
> framebuffer console, suspended, resumed and switched back to X, the box hanged
> immediately just like during resume after a suspend from under X.  [There also
> were some problems when switching from X to the framebuffer console and back
> which seemd to be independent of suspend/resume (in short, the screen stays
> black after a switch from the framebuffer console to X and you need to kill X
> to fix this).]

You are using radeonfb on it? or vesafb?

first test is to try without either of those installed.

>From memory though that machines an Xpress 200M which is the the worst
graphics card for use with open drivers and has always caused no-end of pain.

Its also mostly undocumented when it comes to errata and workarounds.

Dave.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/