Re: smart cache. ist is possible?

[Alexey Fisher]

Sitsofe Wheeler schrieb:
> On Sun, Mar 15, 2009 at 11:06:34PM +0100, Alexey Fisher wrote:
>> It is not what i mean. I know how to clear cache but exactly i do not 
>> won't it. I will use cache and it's working perfectly with small files. 
> 
> I meant for timings on the small files otherwise how do you know which
> exactly pages were floating around the cache?
> 
>> But there is a problem with big files. For example i have 4GB RAM, if i 
>> read 4,6GB file the cache is useless. The question is; are there any way 
>> to workaround it, except more RAM?
> 
> I suspect what is happening is that you are cycling the cache. Because
> you can't hold everything and you are reading the file sequentially you
> will successfully have cleared the cache of the start of the file by the
> time you start again (so first bit gets evicted by the time last bit is
> read etc). If you use dd bs=1000M count=1 I think you will find that the
> kernel CAN cache pieces of files but as pointed out elsewhere, without
> knowing the future what do you decide to keep when your cache is full?
> 
> At a guess you either you need to provide a hint (e.g. bybassing the
> cache for some of the file so it doesn't become full or locking specific
> pages into RAM) or create a bigger cache somehow (e.g. by buying more
> RAM).

Just to make sure i understand you.
for example:
i have some smole RAM to cache 5 blocks from hard drive, and it's empty.
|0|0|0|0|0|
i read some file with 1-10 blocks ( dd if=somefile ). At the beginning
of read it will cache thirst 5  blocks ( |1|2|3|4|5| ) and after no
place left in cache it will replace old cache with new blocks(
|6|7|8|9|10| ).
If i read same somefile second time, normally will happen the same. It
tries to read block 1 and  this is not it cache, so it will be cached
and move block 6 out. ( |1|7|8|9|10| ) So it will complete replace
entire cache.
Or i can say, read somefile and only blocks 6-10 so i can use
performance from cache.
Or OS need to get a list of blocks from somefile and list of cached
blocks. And check if there is some of them cached. If they are, it
should lock the cache, read 1-5 without caching it and read 6-10 from
cache. After this unlock the cache. But this is not possible because
this operation is to expensive.
Is this what you mean?

Thank you.
Alexey.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/