[git patches] libata push 1 of 2
From: Jeff Garzik
Date: Mon Dec 29 2008 - 07:52:27 EST
Nothing major in this push, really. Notes:
1) sata_sil DMA restrictions got removed by using a private chip
DMA engine rather than the chip's IDE-compatible legacy DMA engine
(it has two engines, yes).
We need to watch for data corruption.
2) The [non-libata] DMI change was discussed upstream, and is a "better
fix" for the DMI matching change added to ata_piix late in 2.6.28-rc.
3) As the title indicates, there is a second push coming, mostly
consisting of Alan PATA material.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 8 +-
drivers/ata/ata_generic.c | 5 +-
drivers/ata/ata_piix.c | 21 ++---
drivers/ata/libata-acpi.c | 19 ++--
drivers/ata/libata-core.c | 204 ++++++++++++++++++++++++---------------
drivers/ata/libata-eh.c | 116 +++++++++++++----------
drivers/ata/libata-pmp.c | 22 ++--
drivers/ata/libata-scsi.c | 22 ++--
drivers/ata/pata_bf54x.c | 1 -
drivers/ata/pata_it821x.c | 34 +++----
drivers/ata/pata_ixp4xx_cf.c | 14 +--
drivers/ata/pata_legacy.c | 18 ++--
drivers/ata/pata_oldpiix.c | 1 -
drivers/ata/pata_pdc2027x.c | 29 +++----
drivers/ata/pata_platform.c | 14 +--
drivers/ata/pata_radisys.c | 1 -
drivers/ata/pata_rz1000.c | 16 ++--
drivers/ata/pata_scc.c | 1 -
drivers/ata/pata_serverworks.c | 1 -
drivers/ata/pata_sis.c | 1 -
drivers/ata/sata_mv.c | 1 -
drivers/ata/sata_sil.c | 98 +++++++++++++++++++-
drivers/firmware/dmi_scan.c | 16 +++
include/linux/dmi.h | 3 +
include/linux/libata.h | 71 +++++++++++----
25 files changed, 457 insertions(+), 280 deletions(-)
Jiri Slaby (2):
DMI: add dmi_match
[libata] ata_piix: cleanup dmi strings checking
Lubomir Bulej (1):
libata: blacklist NCQ on OCZ CORE 2 SSD (resend)
Qinghuang Feng (1):
[libata] Update kernel-doc comments to match source code
Robert Hancock (1):
sata_sil: add Large Block Transfer support
Tejun Heo (3):
libata: beef up iterators
libata: when restoring SControl during detach do the PMP links first
libata: perform port detach in EH
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a67b8e7..656448c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1119,14 +1119,14 @@ static void ahci_start_port(struct ata_port *ap)
/* turn on LEDs */
if (ap->flags & ATA_FLAG_EM) {
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
emp = &pp->em_priv[link->pmp];
ahci_transmit_led_message(ap, emp->led_state, 4);
}
}
if (ap->flags & ATA_FLAG_SW_ACTIVITY)
- ata_port_for_each_link(link, ap)
+ ata_for_each_link(link, ap, EDGE)
ahci_init_sw_activity(link);
}
@@ -1361,7 +1361,7 @@ static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
struct ahci_em_priv *emp;
int rc = 0;
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
emp = &pp->em_priv[link->pmp];
rc += sprintf(buf, "%lx\n", emp->led_state);
}
@@ -1941,7 +1941,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
u32 serror;
/* determine active link */
- ata_port_for_each_link(link, ap)
+ ata_for_each_link(link, ap, EDGE)
if (ata_link_active(link))
break;
if (!link)
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 5c33767..dc48a63 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -57,10 +57,7 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
dma_enabled = 0xFF;
- ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev))
- continue;
-
+ ata_for_each_dev(dev, link, ENABLED) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->dma_mode = XFER_MW_DMA_0;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index c11936e..5fdf167 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1072,20 +1072,13 @@ static int piix_broken_suspend(void)
* matching is necessary because dmi_system_id.matches is
* limited to four entries.
*/
- if (dmi_get_system_info(DMI_SYS_VENDOR) &&
- dmi_get_system_info(DMI_PRODUCT_NAME) &&
- dmi_get_system_info(DMI_PRODUCT_VERSION) &&
- dmi_get_system_info(DMI_PRODUCT_SERIAL) &&
- dmi_get_system_info(DMI_BOARD_VENDOR) &&
- dmi_get_system_info(DMI_BOARD_NAME) &&
- dmi_get_system_info(DMI_BOARD_VERSION) &&
- !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") &&
- !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") &&
- !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") &&
- !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") &&
- !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") &&
- !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") &&
- !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0"))
+ if (dmi_match(DMI_SYS_VENDOR, "TOSHIBA") &&
+ dmi_match(DMI_PRODUCT_NAME, "000000") &&
+ dmi_match(DMI_PRODUCT_VERSION, "000000") &&
+ dmi_match(DMI_PRODUCT_SERIAL, "000000") &&
+ dmi_match(DMI_BOARD_VENDOR, "TOSHIBA") &&
+ dmi_match(DMI_BOARD_NAME, "Portable PC") &&
+ dmi_match(DMI_BOARD_VERSION, "Version A0"))
return 1;
return 0;
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index c012307..ef02e48 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -89,7 +89,7 @@ void ata_acpi_associate_sata_port(struct ata_port *ap)
ap->link.device->acpi_handle = NULL;
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
acpi_integer adr = SATA_ADR(ap->port_no, link->pmp);
link->device->acpi_handle =
@@ -129,8 +129,8 @@ static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
struct ata_link *tlink;
struct ata_device *tdev;
- ata_port_for_each_link(tlink, ap)
- ata_link_for_each_dev(tdev, tlink)
+ ata_for_each_link(tlink, ap, EDGE)
+ ata_for_each_dev(tdev, tlink, ALL)
tdev->flags |= ATA_DFLAG_DETACH;
}
@@ -588,12 +588,9 @@ int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
unsigned long xfer_mask, udma_mask;
- if (!ata_dev_enabled(dev))
- continue;
-
xfer_mask = ata_acpi_gtm_xfermask(dev, gtm);
ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask);
@@ -893,7 +890,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
* use values set by _STM. Cache _GTF result and
* schedule _GTF.
*/
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL) {
ata_acpi_clear_gtf(dev);
if (ata_dev_enabled(dev) &&
ata_dev_get_GTF(dev, NULL) >= 0)
@@ -904,7 +901,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
* there's no reason to evaluate IDE _GTF early
* without _STM. Clear cache and schedule _GTF.
*/
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL) {
ata_acpi_clear_gtf(dev);
if (ata_dev_enabled(dev))
dev->flags |= ATA_DFLAG_ACPI_PENDING;
@@ -932,8 +929,8 @@ void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
if (state.event == PM_EVENT_ON)
acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
- ata_link_for_each_dev(dev, &ap->link) {
- if (dev->acpi_handle && ata_dev_enabled(dev))
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
+ if (dev->acpi_handle)
acpi_bus_set_power(dev->acpi_handle,
state.event == PM_EVENT_ON ?
ACPI_STATE_D0 : ACPI_STATE_D3);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index bc6695e..fecca42 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -163,43 +163,119 @@ MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
-/*
- * Iterator helpers. Don't use directly.
+/**
+ * ata_link_next - link iteration helper
+ * @link: the previous link, NULL to start
+ * @ap: ATA port containing links to iterate
+ * @mode: iteration mode, one of ATA_LITER_*
+ *
+ * LOCKING:
+ * Host lock or EH context.
*
- * LOCKING:
- * Host lock or EH context.
+ * RETURNS:
+ * Pointer to the next link.
*/
-struct ata_link *__ata_port_next_link(struct ata_port *ap,
- struct ata_link *link, bool dev_only)
+struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap,
+ enum ata_link_iter_mode mode)
{
+ BUG_ON(mode != ATA_LITER_EDGE &&
+ mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST);
+
/* NULL link indicates start of iteration */
- if (!link) {
- if (dev_only && sata_pmp_attached(ap))
- return ap->pmp_link;
- return &ap->link;
- }
+ if (!link)
+ switch (mode) {
+ case ATA_LITER_EDGE:
+ case ATA_LITER_PMP_FIRST:
+ if (sata_pmp_attached(ap))
+ return ap->pmp_link;
+ /* fall through */
+ case ATA_LITER_HOST_FIRST:
+ return &ap->link;
+ }
- /* we just iterated over the host master link, what's next? */
- if (link == &ap->link) {
- if (!sata_pmp_attached(ap)) {
- if (unlikely(ap->slave_link) && !dev_only)
+ /* we just iterated over the host link, what's next? */
+ if (link == &ap->link)
+ switch (mode) {
+ case ATA_LITER_HOST_FIRST:
+ if (sata_pmp_attached(ap))
+ return ap->pmp_link;
+ /* fall through */
+ case ATA_LITER_PMP_FIRST:
+ if (unlikely(ap->slave_link))
return ap->slave_link;
+ /* fall through */
+ case ATA_LITER_EDGE:
return NULL;
}
- return ap->pmp_link;
- }
/* slave_link excludes PMP */
if (unlikely(link == ap->slave_link))
return NULL;
- /* iterate to the next PMP link */
+ /* we were over a PMP link */
if (++link < ap->pmp_link + ap->nr_pmp_links)
return link;
+
+ if (mode == ATA_LITER_PMP_FIRST)
+ return &ap->link;
+
return NULL;
}
/**
+ * ata_dev_next - device iteration helper
+ * @dev: the previous device, NULL to start
+ * @link: ATA link containing devices to iterate
+ * @mode: iteration mode, one of ATA_DITER_*
+ *
+ * LOCKING:
+ * Host lock or EH context.
+ *
+ * RETURNS:
+ * Pointer to the next device.
+ */
+struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link,
+ enum ata_dev_iter_mode mode)
+{
+ BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE &&
+ mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE);
+
+ /* NULL dev indicates start of iteration */
+ if (!dev)
+ switch (mode) {
+ case ATA_DITER_ENABLED:
+ case ATA_DITER_ALL:
+ dev = link->device;
+ goto check;
+ case ATA_DITER_ENABLED_REVERSE:
+ case ATA_DITER_ALL_REVERSE:
+ dev = link->device + ata_link_max_devices(link) - 1;
+ goto check;
+ }
+
+ next:
+ /* move to the next one */
+ switch (mode) {
+ case ATA_DITER_ENABLED:
+ case ATA_DITER_ALL:
+ if (++dev < link->device + ata_link_max_devices(link))
+ goto check;
+ return NULL;
+ case ATA_DITER_ENABLED_REVERSE:
+ case ATA_DITER_ALL_REVERSE:
+ if (--dev >= link->device)
+ goto check;
+ return NULL;
+ }
+
+ check:
+ if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) &&
+ !ata_dev_enabled(dev))
+ goto next;
+ return dev;
+}
+
+/**
* ata_dev_phys_link - find physical link for a device
* @dev: ATA device to look up physical link for
*
@@ -1107,8 +1183,8 @@ static void ata_lpm_enable(struct ata_host *host)
for (i = 0; i < host->n_ports; i++) {
ap = host->ports[i];
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link)
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ALL)
ata_dev_disable_pm(dev);
}
}
@@ -2594,11 +2670,11 @@ int ata_bus_probe(struct ata_port *ap)
ata_port_probe(ap);
- ata_link_for_each_dev(dev, &ap->link)
+ ata_for_each_dev(dev, &ap->link, ALL)
tries[dev->devno] = ATA_PROBE_MAX_TRIES;
retry:
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL) {
/* If we issue an SRST then an ATA drive (not ATAPI)
* may change configuration and be in PIO0 timing. If
* we do a hard reset (or are coming from power on)
@@ -2620,7 +2696,7 @@ int ata_bus_probe(struct ata_port *ap)
/* reset and determine device classes */
ap->ops->phy_reset(ap);
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL) {
if (!(ap->flags & ATA_FLAG_DISABLED) &&
dev->class != ATA_DEV_UNKNOWN)
classes[dev->devno] = dev->class;
@@ -2636,7 +2712,7 @@ int ata_bus_probe(struct ata_port *ap)
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
- ata_link_for_each_dev_reverse(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL_REVERSE) {
if (tries[dev->devno])
dev->class = classes[dev->devno];
@@ -2653,24 +2729,19 @@ int ata_bus_probe(struct ata_port *ap)
if (ap->ops->cable_detect)
ap->cbl = ap->ops->cable_detect(ap);
- /* We may have SATA bridge glue hiding here irrespective of the
- reported cable types and sensed types */
- ata_link_for_each_dev(dev, &ap->link) {
- if (!ata_dev_enabled(dev))
- continue;
- /* SATA drives indicate we have a bridge. We don't know which
- end of the link the bridge is which is a problem */
+ /* We may have SATA bridge glue hiding here irrespective of
+ * the reported cable types and sensed types. When SATA
+ * drives indicate we have a bridge, we don't know which end
+ * of the link the bridge is which is a problem.
+ */
+ ata_for_each_dev(dev, &ap->link, ENABLED)
if (ata_id_is_sata(dev->id))
ap->cbl = ATA_CBL_SATA;
- }
/* After the identify sequence we can now set up the devices. We do
this in the normal order so that the user doesn't get confused */
- ata_link_for_each_dev(dev, &ap->link) {
- if (!ata_dev_enabled(dev))
- continue;
-
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);
ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
@@ -2683,9 +2754,8 @@ int ata_bus_probe(struct ata_port *ap)
if (rc)
goto fail;
- ata_link_for_each_dev(dev, &ap->link)
- if (ata_dev_enabled(dev))
- return 0;
+ ata_for_each_dev(dev, &ap->link, ENABLED)
+ return 0;
/* no device present, disable port */
ata_port_disable(ap);
@@ -3331,13 +3401,10 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
int rc = 0, used_dma = 0, found = 0;
/* step 1: calculate xfer_mask */
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ENABLED) {
unsigned long pio_mask, dma_mask;
unsigned int mode_mask;
- if (!ata_dev_enabled(dev))
- continue;
-
mode_mask = ATA_DMA_MASK_ATA;
if (dev->class == ATA_DEV_ATAPI)
mode_mask = ATA_DMA_MASK_ATAPI;
@@ -3366,10 +3433,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
goto out;
/* step 2: always set host PIO timings */
- ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev))
- continue;
-
+ ata_for_each_dev(dev, link, ENABLED) {
if (dev->pio_mode == 0xff) {
ata_dev_printk(dev, KERN_WARNING, "no PIO support\n");
rc = -EINVAL;
@@ -3383,8 +3447,8 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
}
/* step 3: set host DMA timings */
- ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
+ ata_for_each_dev(dev, link, ENABLED) {
+ if (!ata_dma_enabled(dev))
continue;
dev->xfer_mode = dev->dma_mode;
@@ -3394,11 +3458,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
}
/* step 4: update devices' xfer mode */
- ata_link_for_each_dev(dev, link) {
- /* don't update suspended devices' xfer mode */
- if (!ata_dev_enabled(dev))
- continue;
-
+ ata_for_each_dev(dev, link, ENABLED) {
rc = ata_dev_set_mode(dev);
if (rc)
goto out;
@@ -4048,6 +4108,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ },
{ "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
+ { "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ },
/* Seagate NCQ + FLUSH CACHE firmware bug */
{ "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ |
@@ -4263,9 +4324,9 @@ static int cable_is_40wire(struct ata_port *ap)
* - if you have a non detect capable drive you don't want it
* to colour the choice
*/
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link) {
- if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ENABLED) {
+ if (!ata_is_40wire(dev))
return 0;
}
}
@@ -4672,7 +4733,6 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
/**
* ata_qc_new_init - Request an available ATA command, and initialize it
* @dev: Device from whom we request an available command structure
- * @tag: command tag
*
* LOCKING:
* None.
@@ -5218,7 +5278,7 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
}
ap->pflags |= ATA_PFLAG_PM_PENDING;
- __ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, HOST_FIRST) {
link->eh_info.action |= action;
link->eh_info.flags |= ehi_flags;
}
@@ -6047,8 +6107,6 @@ int ata_host_activate(struct ata_host *host, int irq,
static void ata_port_detach(struct ata_port *ap)
{
unsigned long flags;
- struct ata_link *link;
- struct ata_device *dev;
if (!ap->ops->error_handler)
goto skip_eh;
@@ -6056,28 +6114,15 @@ static void ata_port_detach(struct ata_port *ap)
/* tell EH we're leaving & flush EH */
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_UNLOADING;
+ ata_port_schedule_eh(ap);
spin_unlock_irqrestore(ap->lock, flags);
+ /* wait till EH commits suicide */
ata_port_wait_eh(ap);
- /* EH is now guaranteed to see UNLOADING - EH context belongs
- * to us. Restore SControl and disable all existing devices.
- */
- __ata_port_for_each_link(link, ap) {
- sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0);
- ata_link_for_each_dev(dev, link)
- ata_dev_disable(dev);
- }
+ /* it better be dead now */
+ WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
- /* Final freeze & EH. All in-flight commands are aborted. EH
- * will be skipped and retrials will be terminated with bad
- * target.
- */
- spin_lock_irqsave(ap->lock, flags);
- ata_port_freeze(ap); /* won't be thawed */
- spin_unlock_irqrestore(ap->lock, flags);
-
- ata_port_wait_eh(ap);
cancel_rearming_delayed_work(&ap->hotplug_task);
skip_eh:
@@ -6528,7 +6573,8 @@ EXPORT_SYMBOL_GPL(ata_base_port_ops);
EXPORT_SYMBOL_GPL(sata_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
-EXPORT_SYMBOL_GPL(__ata_port_next_link);
+EXPORT_SYMBOL_GPL(ata_link_next);
+EXPORT_SYMBOL_GPL(ata_dev_next);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_alloc);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 32da9a9..8147a83 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -422,7 +422,7 @@ static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev,
if (!dev) {
ehi->action &= ~action;
- ata_link_for_each_dev(tdev, link)
+ ata_for_each_dev(tdev, link, ALL)
ehi->dev_action[tdev->devno] &= ~action;
} else {
/* doesn't make sense for port-wide EH actions */
@@ -430,7 +430,7 @@ static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev,
/* break ehi->action into ehi->dev_action */
if (ehi->action & action) {
- ata_link_for_each_dev(tdev, link)
+ ata_for_each_dev(tdev, link, ALL)
ehi->dev_action[tdev->devno] |=
ehi->action & action;
ehi->action &= ~action;
@@ -491,6 +491,31 @@ enum blk_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
return ret;
}
+static void ata_eh_unload(struct ata_port *ap)
+{
+ struct ata_link *link;
+ struct ata_device *dev;
+ unsigned long flags;
+
+ /* Restore SControl IPM and SPD for the next driver and
+ * disable attached devices.
+ */
+ ata_for_each_link(link, ap, PMP_FIRST) {
+ sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0);
+ ata_for_each_dev(dev, link, ALL)
+ ata_dev_disable(dev);
+ }
+
+ /* freeze and set UNLOADED */
+ spin_lock_irqsave(ap->lock, flags);
+
+ ata_port_freeze(ap); /* won't be thawed */
+ ap->pflags &= ~ATA_PFLAG_EH_PENDING; /* clear pending from freeze */
+ ap->pflags |= ATA_PFLAG_UNLOADED;
+
+ spin_unlock_irqrestore(ap->lock, flags);
+}
+
/**
* ata_scsi_error - SCSI layer error handler callback
* @host: SCSI host on which error occurred
@@ -592,7 +617,7 @@ void ata_scsi_error(struct Scsi_Host *host)
/* fetch & clear EH info */
spin_lock_irqsave(ap->lock, flags);
- __ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, HOST_FIRST) {
struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev;
@@ -600,12 +625,9 @@ void ata_scsi_error(struct Scsi_Host *host)
link->eh_context.i = link->eh_info;
memset(&link->eh_info, 0, sizeof(link->eh_info));
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ENABLED) {
int devno = dev->devno;
- if (!ata_dev_enabled(dev))
- continue;
-
ehc->saved_xfer_mode[devno] = dev->xfer_mode;
if (ata_ncq_enabled(dev))
ehc->saved_ncq_enabled |= 1 << devno;
@@ -621,8 +643,13 @@ void ata_scsi_error(struct Scsi_Host *host)
/* invoke EH, skip if unloading or suspended */
if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED)))
ap->ops->error_handler(ap);
- else
+ else {
+ /* if unloading, commence suicide */
+ if ((ap->pflags & ATA_PFLAG_UNLOADING) &&
+ !(ap->pflags & ATA_PFLAG_UNLOADED))
+ ata_eh_unload(ap);
ata_eh_finish(ap);
+ }
/* process port suspend request */
ata_eh_handle_port_suspend(ap);
@@ -644,7 +671,7 @@ void ata_scsi_error(struct Scsi_Host *host)
}
/* this run is complete, make sure EH info is clear */
- __ata_port_for_each_link(link, ap)
+ ata_for_each_link(link, ap, HOST_FIRST)
memset(&link->eh_info, 0, sizeof(link->eh_info));
/* Clear host_eh_scheduled while holding ap->lock such
@@ -1025,7 +1052,7 @@ int sata_async_notification(struct ata_port *ap)
struct ata_link *link;
/* check and notify ATAPI AN */
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
if (!(sntf & (1 << link->pmp)))
continue;
@@ -2005,7 +2032,7 @@ void ata_eh_autopsy(struct ata_port *ap)
{
struct ata_link *link;
- ata_port_for_each_link(link, ap)
+ ata_for_each_link(link, ap, EDGE)
ata_eh_link_autopsy(link);
/* Handle the frigging slave link. Autopsy is done similarly
@@ -2219,7 +2246,7 @@ void ata_eh_report(struct ata_port *ap)
{
struct ata_link *link;
- __ata_port_for_each_link(link, ap)
+ ata_for_each_link(link, ap, HOST_FIRST)
ata_eh_link_report(link);
}
@@ -2230,7 +2257,7 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
struct ata_device *dev;
if (clear_classes)
- ata_link_for_each_dev(dev, link)
+ ata_for_each_dev(dev, link, ALL)
classes[dev->devno] = ATA_DEV_UNKNOWN;
return reset(link, classes, deadline);
@@ -2294,7 +2321,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
/* If we issue an SRST then an ATA drive (not ATAPI)
* may change configuration and be in PIO0 timing. If
* we do a hard reset (or are coming from power on)
@@ -2355,7 +2382,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
"port disabled. ignoring.\n");
ehc->i.action &= ~ATA_EH_RESET;
- ata_link_for_each_dev(dev, link)
+ ata_for_each_dev(dev, link, ALL)
classes[dev->devno] = ATA_DEV_NONE;
rc = 0;
@@ -2369,7 +2396,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
* bang classes and return.
*/
if (reset && !(ehc->i.action & ATA_EH_RESET)) {
- ata_link_for_each_dev(dev, link)
+ ata_for_each_dev(dev, link, ALL)
classes[dev->devno] = ATA_DEV_NONE;
rc = 0;
goto out;
@@ -2454,7 +2481,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
/*
* Post-reset processing
*/
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
/* After the reset, the device state is PIO 0 and the
* controller state is undefined. Reset also wakes up
* drives from sleeping mode.
@@ -2510,7 +2537,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
* can be reliably detected and retried.
*/
nr_unknown = 0;
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
classes[dev->devno] = ATA_DEV_NONE;
@@ -2619,8 +2646,8 @@ static inline void ata_eh_pull_park_action(struct ata_port *ap)
spin_lock_irqsave(ap->lock, flags);
INIT_COMPLETION(ap->park_req_pending);
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ALL) {
struct ata_eh_info *ehi = &link->eh_info;
link->eh_context.i.dev_action[dev->devno] |=
@@ -2675,7 +2702,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
* be done backwards such that PDIAG- is released by the slave
* device before the master device is identified.
*/
- ata_link_for_each_dev_reverse(dev, link) {
+ ata_for_each_dev(dev, link, ALL_REVERSE) {
unsigned int action = ata_eh_dev_action(dev);
unsigned int readid_flags = 0;
@@ -2744,7 +2771,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
/* Configure new devices forward such that user doesn't see
* device detection messages backwards.
*/
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
if (!(new_mask & (1 << dev->devno)) ||
dev->class == ATA_DEV_PMP)
continue;
@@ -2793,10 +2820,7 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
int rc;
/* if data transfer is verified, clear DUBIOUS_XFER on ering top */
- ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev))
- continue;
-
+ ata_for_each_dev(dev, link, ENABLED) {
if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) {
struct ata_ering_entry *ent;
@@ -2813,14 +2837,11 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
rc = ata_do_set_mode(link, r_failed_dev);
/* if transfer mode has changed, set DUBIOUS_XFER on device */
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ENABLED) {
struct ata_eh_context *ehc = &link->eh_context;
u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];
u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno));
- if (!ata_dev_enabled(dev))
- continue;
-
if (dev->xfer_mode != saved_xfer_mode ||
ata_ncq_enabled(dev) != saved_ncq)
dev->flags |= ATA_DFLAG_DUBIOUS_XFER;
@@ -2881,9 +2902,8 @@ static int ata_link_nr_enabled(struct ata_link *link)
struct ata_device *dev;
int cnt = 0;
- ata_link_for_each_dev(dev, link)
- if (ata_dev_enabled(dev))
- cnt++;
+ ata_for_each_dev(dev, link, ENABLED)
+ cnt++;
return cnt;
}
@@ -2892,7 +2912,7 @@ static int ata_link_nr_vacant(struct ata_link *link)
struct ata_device *dev;
int cnt = 0;
- ata_link_for_each_dev(dev, link)
+ ata_for_each_dev(dev, link, ALL)
if (dev->class == ATA_DEV_UNKNOWN)
cnt++;
return cnt;
@@ -2918,7 +2938,7 @@ static int ata_eh_skip_recovery(struct ata_link *link)
return 0;
/* skip if class codes for all vacant slots are ATA_DEV_NONE */
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
if (dev->class == ATA_DEV_UNKNOWN &&
ehc->classes[dev->devno] != ATA_DEV_NONE)
return 0;
@@ -3026,7 +3046,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
DPRINTK("ENTER\n");
/* prep for recovery */
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
struct ata_eh_context *ehc = &link->eh_context;
/* re-enable link? */
@@ -3038,7 +3058,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_eh_done(link, NULL, ATA_EH_ENABLE_LINK);
}
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
if (link->flags & ATA_LFLAG_NO_RETRY)
ehc->tries[dev->devno] = 1;
else
@@ -3068,19 +3088,19 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
goto out;
/* prep for EH */
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
struct ata_eh_context *ehc = &link->eh_context;
/* skip EH if possible. */
if (ata_eh_skip_recovery(link))
ehc->i.action = 0;
- ata_link_for_each_dev(dev, link)
+ ata_for_each_dev(dev, link, ALL)
ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
}
/* reset */
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
struct ata_eh_context *ehc = &link->eh_context;
if (!(ehc->i.action & ATA_EH_RESET))
@@ -3105,8 +3125,8 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_eh_pull_park_action(ap);
deadline = jiffies;
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ALL) {
struct ata_eh_context *ehc = &link->eh_context;
unsigned long tmp;
@@ -3134,8 +3154,8 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
deadline = wait_for_completion_timeout(&ap->park_req_pending,
deadline - now);
} while (deadline);
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ALL) {
if (!(link->eh_context.unloaded_mask &
(1 << dev->devno)))
continue;
@@ -3146,7 +3166,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
}
/* the rest */
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
struct ata_eh_context *ehc = &link->eh_context;
/* revalidate existing devices and attach new ones */
@@ -3172,7 +3192,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
* disrupting the current users of the device.
*/
if (ehc->i.flags & ATA_EHI_DID_RESET) {
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
if (dev->class != ATA_DEV_ATAPI)
continue;
rc = atapi_eh_clear_ua(dev);
@@ -3183,7 +3203,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
/* configure link power saving */
if (ehc->i.action & ATA_EH_LPM)
- ata_link_for_each_dev(dev, link)
+ ata_for_each_dev(dev, link, ALL)
ata_dev_enable_pm(dev, ap->pm_policy);
/* this link is okay now */
@@ -3288,7 +3308,7 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
rc = ata_eh_recover(ap, prereset, softreset, hardreset, postreset,
NULL);
if (rc) {
- ata_link_for_each_dev(dev, &ap->link)
+ ata_for_each_dev(dev, &ap->link, ALL)
ata_dev_disable(dev);
}
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index b65db30..98ca07a 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -321,7 +321,7 @@ static void sata_pmp_quirks(struct ata_port *ap)
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
/* Class code report is unreliable and SRST
* times out under certain configurations.
*/
@@ -336,7 +336,7 @@ static void sata_pmp_quirks(struct ata_port *ap)
}
} else if (vendor == 0x1095 && devid == 0x4723) {
/* sil4723 quirks */
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
/* class code report is unreliable */
if (link->pmp < 2)
link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -348,7 +348,7 @@ static void sata_pmp_quirks(struct ata_port *ap)
}
} else if (vendor == 0x1095 && devid == 0x4726) {
/* sil4726 quirks */
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
/* Class code report is unreliable and SRST
* times out under certain configurations.
* Config device can be at port 0 or 5 and
@@ -450,7 +450,7 @@ int sata_pmp_attach(struct ata_device *dev)
if (ap->ops->pmp_attach)
ap->ops->pmp_attach(ap);
- ata_port_for_each_link(tlink, ap)
+ ata_for_each_link(tlink, ap, EDGE)
sata_link_init_spd(tlink);
ata_acpi_associate_sata_port(ap);
@@ -487,7 +487,7 @@ static void sata_pmp_detach(struct ata_device *dev)
if (ap->ops->pmp_detach)
ap->ops->pmp_detach(ap);
- ata_port_for_each_link(tlink, ap)
+ ata_for_each_link(tlink, ap, EDGE)
ata_eh_detach_dev(tlink->device);
spin_lock_irqsave(ap->lock, flags);
@@ -700,7 +700,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
}
/* PMP is reset, SErrors cannot be trusted, scan all */
- ata_port_for_each_link(tlink, ap) {
+ ata_for_each_link(tlink, ap, EDGE) {
struct ata_eh_context *ehc = &tlink->eh_context;
ehc->i.probe_mask |= ATA_ALL_DEVICES;
@@ -768,7 +768,7 @@ static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap)
spin_lock_irqsave(ap->lock, flags);
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
if (!(link->flags & ATA_LFLAG_DISABLED))
continue;
@@ -852,7 +852,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
int cnt, rc;
pmp_tries = ATA_EH_PMP_TRIES;
- ata_port_for_each_link(link, ap)
+ ata_for_each_link(link, ap, EDGE)
link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES;
retry:
@@ -861,7 +861,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
rc = ata_eh_recover(ap, ops->prereset, ops->softreset,
ops->hardreset, ops->postreset, NULL);
if (rc) {
- ata_link_for_each_dev(dev, &ap->link)
+ ata_for_each_dev(dev, &ap->link, ALL)
ata_dev_disable(dev);
return rc;
}
@@ -870,7 +870,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
return 0;
/* new PMP online */
- ata_port_for_each_link(link, ap)
+ ata_for_each_link(link, ap, EDGE)
link_tries[link->pmp] = ATA_EH_PMP_LINK_TRIES;
/* fall through */
@@ -942,7 +942,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
}
cnt = 0;
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
if (!(gscr_error & (1 << link->pmp)))
continue;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 47c7afc..0b2e14f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3229,12 +3229,12 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
return;
repeat:
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ENABLED) {
struct scsi_device *sdev;
int channel = 0, id = 0;
- if (!ata_dev_enabled(dev) || dev->sdev)
+ if (dev->sdev)
continue;
if (ata_is_host_link(link))
@@ -3255,9 +3255,9 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
* failure occurred, scan would have failed silently. Check
* whether all devices are attached.
*/
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link) {
- if (ata_dev_enabled(dev) && !dev->sdev)
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ENABLED) {
+ if (!dev->sdev)
goto exit_loop;
}
}
@@ -3381,7 +3381,7 @@ static void ata_scsi_handle_link_detach(struct ata_link *link)
struct ata_port *ap = link->ap;
struct ata_device *dev;
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
unsigned long flags;
if (!(dev->flags & ATA_DFLAG_DETACHED))
@@ -3496,7 +3496,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
if (devno == SCAN_WILD_CARD) {
struct ata_link *link;
- ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, EDGE) {
struct ata_eh_info *ehi = &link->eh_info;
ehi->probe_mask |= ATA_ALL_DEVICES;
ehi->action |= ATA_EH_RESET;
@@ -3544,11 +3544,11 @@ void ata_scsi_dev_rescan(struct work_struct *work)
spin_lock_irqsave(ap->lock, flags);
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ENABLED) {
struct scsi_device *sdev = dev->sdev;
- if (!ata_dev_enabled(dev) || !sdev)
+ if (!sdev)
continue;
if (scsi_device_get(sdev))
continue;
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 1266924..1050fed 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -356,7 +356,6 @@ static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev)
* bfin_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: um
- * @udma: udma mode, 0 - 6
*
* Set UDMA mode for device.
*
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 860ede5..f828a29 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -465,24 +465,22 @@ static int it821x_smart_set_mode(struct ata_link *link, struct ata_device **unus
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, link) {
- if (ata_dev_enabled(dev)) {
- /* We don't really care */
- dev->pio_mode = XFER_PIO_0;
- dev->dma_mode = XFER_MW_DMA_0;
- /* We do need the right mode information for DMA or PIO
- and this comes from the current configuration flags */
- if (ata_id_has_dma(dev->id)) {
- ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
- dev->xfer_mode = XFER_MW_DMA_0;
- dev->xfer_shift = ATA_SHIFT_MWDMA;
- dev->flags &= ~ATA_DFLAG_PIO;
- } else {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
- dev->xfer_mode = XFER_PIO_0;
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
- }
+ ata_for_each_dev(dev, link, ENABLED) {
+ /* We don't really care */
+ dev->pio_mode = XFER_PIO_0;
+ dev->dma_mode = XFER_MW_DMA_0;
+ /* We do need the right mode information for DMA or PIO
+ and this comes from the current configuration flags */
+ if (ata_id_has_dma(dev->id)) {
+ ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
+ dev->xfer_mode = XFER_MW_DMA_0;
+ dev->xfer_shift = ATA_SHIFT_MWDMA;
+ dev->flags &= ~ATA_DFLAG_PIO;
+ } else {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
}
}
return 0;
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 2014253..b173c15 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -30,14 +30,12 @@ static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, link) {
- if (ata_dev_enabled(dev)) {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
- dev->pio_mode = XFER_PIO_0;
- dev->xfer_mode = XFER_PIO_0;
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
- }
+ ata_for_each_dev(dev, link, ENABLED) {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
+ dev->pio_mode = XFER_PIO_0;
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
}
return 0;
}
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 930c220..6c1d778 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -194,15 +194,12 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, link) {
- if (ata_dev_enabled(dev)) {
- ata_dev_printk(dev, KERN_INFO,
- "configured for PIO\n");
- dev->pio_mode = XFER_PIO_0;
- dev->xfer_mode = XFER_PIO_0;
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
- }
+ ata_for_each_dev(dev, link, ENABLED) {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ dev->pio_mode = XFER_PIO_0;
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
}
return 0;
}
@@ -641,7 +638,6 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
* qdi6580dp_set_piomode - PIO setup for dual channel
* @ap: Port
* @adev: Device
- * @irq: interrupt line
*
* In dual channel mode the 6580 has one clock per channel and we have
* to software clockswitch in qc_issue.
@@ -1028,7 +1024,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
/* Nothing found means we drop the port as its probably not there */
ret = -ENODEV;
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL) {
if (!ata_dev_absent(dev)) {
legacy_host[probe->slot] = host;
ld->platform_dev = pdev;
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index c0dbc46..2c1a91c 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -116,7 +116,6 @@ static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev)
* oldpiix_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: Device to program
- * @isich: True if the device is an ICH and has IOCFG registers
*
* Set MWDMA mode for device, in host controller PCI config space.
*
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 0e1c2c1..e94efcc 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -281,7 +281,6 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
* pdc2027x_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port to configure
* @adev: um
- * @pio: PIO mode, 0 - 4
*
* Set PIO mode for device.
*
@@ -326,7 +325,6 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
* pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings
* @ap: Port to configure
* @adev: um
- * @udma: udma mode, XFER_UDMA_0 to XFER_UDMA_6
*
* Set UDMA mode for device.
*
@@ -406,23 +404,20 @@ static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed
if (rc < 0)
return rc;
- ata_link_for_each_dev(dev, link) {
- if (ata_dev_enabled(dev)) {
+ ata_for_each_dev(dev, link, ENABLED) {
+ pdc2027x_set_piomode(ap, dev);
- pdc2027x_set_piomode(ap, dev);
+ /*
+ * Enable prefetch if the device support PIO only.
+ */
+ if (dev->xfer_shift == ATA_SHIFT_PIO) {
+ u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1));
+ ctcr1 |= (1 << 25);
+ iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
- /*
- * Enable prefetch if the device support PIO only.
- */
- if (dev->xfer_shift == ATA_SHIFT_PIO) {
- u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1));
- ctcr1 |= (1 << 25);
- iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
-
- PDPRINTK("Turn on prefetch\n");
- } else {
- pdc2027x_set_dmamode(ap, dev);
- }
+ PDPRINTK("Turn on prefetch\n");
+ } else {
+ pdc2027x_set_dmamode(ap, dev);
}
}
return 0;
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 77e4e3b..6afa07a 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -34,14 +34,12 @@ static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unu
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, link) {
- if (ata_dev_enabled(dev)) {
- /* We don't really care */
- dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
- }
+ ata_for_each_dev(dev, link, ENABLED) {
+ /* We don't really care */
+ dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
}
return 0;
}
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 0b0aa45..695d44a 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -81,7 +81,6 @@ static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev)
* radisys_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: Device to program
- * @isich: True if the device is an ICH and has IOCFG registers
*
* Set MWDMA mode for device, in host controller PCI config space.
*
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 7dfd1f3..46d6bc1 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -38,15 +38,13 @@ static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
{
struct ata_device *dev;
- ata_link_for_each_dev(dev, link) {
- if (ata_dev_enabled(dev)) {
- /* We don't really care */
- dev->pio_mode = XFER_PIO_0;
- dev->xfer_mode = XFER_PIO_0;
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
- }
+ ata_for_each_dev(dev, link, ENABLED) {
+ /* We don't really care */
+ dev->pio_mode = XFER_PIO_0;
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
}
return 0;
}
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index cf3707e..d447f1c 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -210,7 +210,6 @@ static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
* scc_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: um
- * @udma: udma mode, 0 - 6
*
* Set UDMA mode for device.
*
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 72e41c9..8d2fd9d 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -138,7 +138,6 @@ static struct sv_cable_table cable_detect[] = {
/**
* serverworks_cable_detect - cable detection
* @ap: ATA port
- * @deadline: deadline jiffies for the operation
*
* Perform cable detection according to the device and subvendor
* identifications
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index e4be55e..27ceb42 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -112,7 +112,6 @@ static int sis_133_cable_detect(struct ata_port *ap)
/**
* sis_66_cable_detect - check for 40/80 pin
* @ap: Port
- * @deadline: deadline jiffies for the operation
*
* Perform cable detection on the UDMA66, UDMA100 and early UDMA133
* SiS IDE controllers.
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 2b24ae5..8691863 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1836,7 +1836,6 @@ static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
/**
* mv_err_intr - Handle error interrupts on the port
* @ap: ATA channel to manipulate
- * @qc: affected command (non-NCQ), or NULL
*
* Most cases require a full reset of the chip's state machine,
* which also performs a COMRESET.
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 031d7b7..564c142 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -46,7 +46,9 @@
#include <linux/libata.h>
#define DRV_NAME "sata_sil"
-#define DRV_VERSION "2.3"
+#define DRV_VERSION "2.4"
+
+#define SIL_DMA_BOUNDARY 0x7fffffffUL
enum {
SIL_MMIO_BAR = 5,
@@ -118,6 +120,10 @@ static void sil_dev_config(struct ata_device *dev);
static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed);
+static void sil_qc_prep(struct ata_queued_cmd *qc);
+static void sil_bmdma_setup(struct ata_queued_cmd *qc);
+static void sil_bmdma_start(struct ata_queued_cmd *qc);
+static void sil_bmdma_stop(struct ata_queued_cmd *qc);
static void sil_freeze(struct ata_port *ap);
static void sil_thaw(struct ata_port *ap);
@@ -167,13 +173,22 @@ static struct pci_driver sil_pci_driver = {
};
static struct scsi_host_template sil_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
+ ATA_BASE_SHT(DRV_NAME),
+ /** These controllers support Large Block Transfer which allows
+ transfer chunks up to 2GB and which cross 64KB boundaries,
+ therefore the DMA limits are more relaxed than standard ATA SFF. */
+ .dma_boundary = SIL_DMA_BOUNDARY,
+ .sg_tablesize = ATA_MAX_PRD
};
static struct ata_port_operations sil_ops = {
.inherits = &ata_bmdma_port_ops,
.dev_config = sil_dev_config,
.set_mode = sil_set_mode,
+ .bmdma_setup = sil_bmdma_setup,
+ .bmdma_start = sil_bmdma_start,
+ .bmdma_stop = sil_bmdma_stop,
+ .qc_prep = sil_qc_prep,
.freeze = sil_freeze,
.thaw = sil_thaw,
.scr_read = sil_scr_read,
@@ -249,6 +264,83 @@ module_param(slow_down, int, 0444);
MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
+static void sil_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
+ void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2;
+
+ /* clear start/stop bit - can safely always write 0 */
+ iowrite8(0, bmdma2);
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_sff_dma_pause(ap);
+}
+
+static void sil_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+
+ /* load PRD table addr. */
+ iowrite32(ap->prd_dma, bmdma + ATA_DMA_TABLE_OFS);
+
+ /* issue r/w command */
+ ap->ops->sff_exec_command(ap, &qc->tf);
+}
+
+static void sil_bmdma_start(struct ata_queued_cmd *qc)
+{
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ struct ata_port *ap = qc->ap;
+ void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
+ void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2;
+ u8 dmactl = ATA_DMA_START;
+
+ /* set transfer direction, start host DMA transaction
+ Note: For Large Block Transfer to work, the DMA must be started
+ using the bmdma2 register. */
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ iowrite8(dmactl, bmdma2);
+}
+
+/* The way God intended PCI IDE scatter/gather lists to look and behave... */
+static void sil_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct scatterlist *sg;
+ struct ata_port *ap = qc->ap;
+ struct ata_prd *prd, *last_prd = NULL;
+ unsigned int si;
+
+ prd = &ap->prd[0];
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ /* Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ u32 addr = (u32) sg_dma_address(sg);
+ u32 sg_len = sg_dma_len(sg);
+
+ prd->addr = cpu_to_le32(addr);
+ prd->flags_len = cpu_to_le32(sg_len);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len);
+
+ last_prd = prd;
+ prd++;
+ }
+
+ if (likely(last_prd))
+ last_prd->flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+static void sil_qc_prep(struct ata_queued_cmd *qc)
+{
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ sil_fill_sg(qc);
+}
+
static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
{
u8 cache_line = 0;
@@ -278,7 +370,7 @@ static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed)
if (rc)
return rc;
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ALL) {
if (!ata_dev_enabled(dev))
dev_mode[dev->devno] = 0; /* PIO0/1/2 */
else if (dev->flags & ATA_DFLAG_PIO)
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 4a597d8..78b989d 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -582,3 +582,19 @@ int dmi_walk(void (*decode)(const struct dmi_header *))
return 0;
}
EXPORT_SYMBOL_GPL(dmi_walk);
+
+/**
+ * dmi_match - compare a string to the dmi field (if exists)
+ *
+ * Returns true if the requested field equals to the str (including NULL).
+ */
+bool dmi_match(enum dmi_field f, const char *str)
+{
+ const char *info = dmi_get_system_info(f);
+
+ if (info == NULL || str == NULL)
+ return info == str;
+
+ return !strcmp(info, str);
+}
+EXPORT_SYMBOL_GPL(dmi_match);
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index 2bfda17..3416190 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -47,6 +47,7 @@ extern int dmi_name_in_vendors(const char *str);
extern int dmi_name_in_serial(const char *str);
extern int dmi_available;
extern int dmi_walk(void (*decode)(const struct dmi_header *));
+extern bool dmi_match(enum dmi_field f, const char *str);
#else
@@ -61,6 +62,8 @@ static inline int dmi_name_in_serial(const char *s) { return 0; }
#define dmi_available 0
static inline int dmi_walk(void (*decode)(const struct dmi_header *))
{ return -1; }
+static inline bool dmi_match(enum dmi_field f, const char *str)
+ { return false; }
#endif
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ed3f26e..3449de5 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -213,10 +213,11 @@ enum {
ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */
ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */
ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */
- ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */
ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */
ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */
ATA_PFLAG_RESETTING = (1 << 8), /* reset in progress */
+ ATA_PFLAG_UNLOADING = (1 << 9), /* driver is being unloaded */
+ ATA_PFLAG_UNLOADED = (1 << 10), /* driver is unloaded */
ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
@@ -1285,26 +1286,62 @@ static inline int ata_link_active(struct ata_link *link)
return ata_tag_valid(link->active_tag) || link->sactive;
}
-extern struct ata_link *__ata_port_next_link(struct ata_port *ap,
- struct ata_link *link,
- bool dev_only);
+/*
+ * Iterators
+ *
+ * ATA_LITER_* constants are used to select link iteration mode and
+ * ATA_DITER_* device iteration mode.
+ *
+ * For a custom iteration directly using ata_{link|dev}_next(), if
+ * @link or @dev, respectively, is NULL, the first element is
+ * returned. @dev and @link can be any valid device or link and the
+ * next element according to the iteration mode will be returned.
+ * After the last element, NULL is returned.
+ */
+enum ata_link_iter_mode {
+ ATA_LITER_EDGE, /* if present, PMP links only; otherwise,
+ * host link. no slave link */
+ ATA_LITER_HOST_FIRST, /* host link followed by PMP or slave links */
+ ATA_LITER_PMP_FIRST, /* PMP links followed by host link,
+ * slave link still comes after host link */
+};
-#define __ata_port_for_each_link(link, ap) \
- for ((link) = __ata_port_next_link((ap), NULL, false); (link); \
- (link) = __ata_port_next_link((ap), (link), false))
+enum ata_dev_iter_mode {
+ ATA_DITER_ENABLED,
+ ATA_DITER_ENABLED_REVERSE,
+ ATA_DITER_ALL,
+ ATA_DITER_ALL_REVERSE,
+};
-#define ata_port_for_each_link(link, ap) \
- for ((link) = __ata_port_next_link((ap), NULL, true); (link); \
- (link) = __ata_port_next_link((ap), (link), true))
+extern struct ata_link *ata_link_next(struct ata_link *link,
+ struct ata_port *ap,
+ enum ata_link_iter_mode mode);
-#define ata_link_for_each_dev(dev, link) \
- for ((dev) = (link)->device; \
- (dev) < (link)->device + ata_link_max_devices(link) || ((dev) = NULL); \
- (dev)++)
+extern struct ata_device *ata_dev_next(struct ata_device *dev,
+ struct ata_link *link,
+ enum ata_dev_iter_mode mode);
+
+/*
+ * Shortcut notation for iterations
+ *
+ * ata_for_each_link() iterates over each link of @ap according to
+ * @mode. @link points to the current link in the loop. @link is
+ * NULL after loop termination. ata_for_each_dev() works the same way
+ * except that it iterates over each device of @link.
+ *
+ * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be
+ * specified when using the following shorthand notations. Only the
+ * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be
+ * specified. This not only increases brevity but also makes it
+ * impossible to use ATA_LITER_* for device iteration or vice-versa.
+ */
+#define ata_for_each_link(link, ap, mode) \
+ for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \
+ (link) = ata_link_next((link), (ap), ATA_LITER_##mode))
-#define ata_link_for_each_dev_reverse(dev, link) \
- for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \
- (dev) >= (link)->device || ((dev) = NULL); (dev)--)
+#define ata_for_each_dev(dev, link, mode) \
+ for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \
+ (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode))
/**
* ata_ncq_enabled - Test whether NCQ is enabled
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/