Devices going offline on Adaptec 29320 using driver AIC79XX after messages "Attempting to queue an ABORT message:CDB"

From: Rhine, Jay $Jay$
Date: Tue Nov 18 2008 - 11:56:23 EST

Next message: Oleg Nesterov: "[PATCH 1/2] protect /sbin/init from unwanted signals more"
Previous message: Joe Korty: "Re: [PATCH] x86: Support always running TSC on Intel CPUs"
Next in thread: Rhine, Jay $Jay$: "RE: Devices going offline on Adaptec 29320 using driver AIC79XX after messages "Attempting to queue an ABORT message:CDB""
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Folks,

I'm having a problem with the devices on my Adaptec 29320 cards.
My best guess is this a bug in the AIC79XX (and possible AIX7XXX) device
driver, possibly releated to SMP. However, I'm not really sure how to
determine if that is really the case.

Here's the scenario. I have an IBM System X 3400 server with 3
Adaptec SCSI Cards - Adaptec 29320LPE PCIe Ultra320 SCSI adapter,
Adaptec 29320ALP PCIx Ultra320 SCSI adapter, and Adaptec 2944 Ultra SCSI
adapter (as well as some other cards unrelated to this problem - an LSI
SAS Card, Emulex Fiber Channel Card, an Intel SATA Controller, and an
Intel 4 Port Ethernet card). The system has 2 Intel E5405 2.00GHz
Quad-Core processors. I'm running Centos 5.2. This system is running
in SMP mode. I've seen this problem on the most recent Centos5.2
kernels, 2.6.18-92.1.17.el5PAE and 2.6.18-92.1.13.el5PAE. As of this
morning, I'm on 2.6.18-92.1.18.el5PAE (so will see this issue there
shortly). The logs in this email are from the 2.6.18-92.1.13.el5PAE
kernel.

Currently I have 8 SCSI hard drives connected to each Adaptec
29320 (one is PCIx and one is PCIe). I find that after using these
devices for a while (usually when doing massive data transfers), I will
see the following message (fuller details below):

Nov 5 20:06:11 xxx kernel: sd 32:0:1:0: Attempting to queue an ABORT
message:CDB: 0x28 0x0 0x5 0x8b 0x89 0xf8 0x0 0x0
0x2 0x0
Nov 5 20:06:11 xxx kernel: scsi32: At time of recovery, card was not
paused
Nov 5 20:06:11 xxx kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<

This would occur, in succession, for each device on the SCSI bus.
Usually, the first time I saw this, the devices would recover after a
few minutes. The second time I see it, one or both of the buses would
go down (I do belive, but I'm not 100% positive on this, that sometimes
only one of the two SCSI buses will go down.)

Now, after this has occurred, I found that it was impossible to recover
the drives (even hours afterward) by doing:

echo "scsi remove-single-device X 0 Y 0" > /proc/scsi/scsi
echo "scsi add-single-device X 0 Y 0" > /proc/scsi/scsi

I would in fact get the same error message in the logs after running the
add-single-device. However, if I removed the module and reprobed, as
follows, everything would come up fine and I could access the devices
again:

rmmod aic79xx
modprobe

This morning, I had another issue releted to this driver / controllers.
When I checked the server this morning, it had Kernel Paniced with
references to the AIC79XX driver! Checking the logs, this occured an
hour or so after the devices went offline during a copy test I was
running. I managed to screan capture the part of the panic on the
screen via the built in "Remote Supervisor Adapter". I've copied the
text of the stack trace here (minus the addresses). Note, that the
panic seems to have occurred as a result of the AIC79XX driver handling
an interrupt.

i8042_panic_blink
panic
die
do_page_fault
do_page_fault
scrup
do_page_fault
error_code
ahd_done [aic79xx]
printk
ahd_flush_quotfifo [aic79xx]
ahd_search_qinfifo [aic79xx]
find_busiest_group
ahd_abort_scbs [aic79xx]
ahd_handle_devreset [aic79xx]
ahd_handle_scsiint [aic79xx]
ahd_linux_isr [aic79xx]
handle_IRQ_event
__do_IRQ
do_IRQ
common_interrupt
mwait_idle
cpu_idle

One other interesting piece of information is that this same error
message showed up on my other adaptec card (with the Sun Storedge A1000
connected to it).

Nov 6 04:09:01 xxx kernel: sd 6:0:5:0: Attempting to queue an ABORT
message
Nov 6 04:09:01 xxx kernel: CDB: 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x8 0x0
Nov 6 04:09:01 xxx kernel: scsi6: At time of recovery, card was not
paused

Note, that I do not even currently have the right utilities to set this
array up, so it is not being used. It is not mounted, and nothing is
copying data from it.

The fact that both SCSI buses have this same issue, and that remove and
reprobing the module will fix the problem makes me suspect the kernel
driver. Also, seeing this same message on a different driver, but one
that probably share much of the same codebase, points me in this
direction.

I have found one message on this list (from 2 year ago) which sounds
like a similiar problem, but has not responses:
http://marc.info/?l=linux-kernel&m=116593449901940&w=2

Previously, I've asked a similiar question on the CentOS 5.2 Hardware
forum, but have not seen any responses. Since this may be driver
related, I decided to ask this question here as well.

http://www.centos.org/modules/newbb/viewtopic.php?topic_id=17134&forum=3
9

I appreciate and help / suggestion people may have. Also, if anyone can
better decipher what this error message really means that would be
helpful.

Thanks!

Jay

System and Log Details follow,

System kernel details- "Uname -a":
Linux xxx 2.6.18-92.1.13.el5PAE #1 SMP Wed Sep 24 20:07:49 EDT 2008 i686
i6 i386 GNU/Linux

Here are the details of the cards on startup:

# cat /var/log/messages | grep -i adaptec
Nov 3 10:28:48 xxxxxxxxxx kernel: scsi6 : Adaptec AIC7XXX EISA/VLB/PCI
SCSI HBA DRIVER, Rev 7.0
Nov 3 10:28:48 xxxxxxxxxx kernel: <Adaptec 2944 Ultra SCSI adapter>
Nov 3 10:28:50 xxxxxxxxxx kernel: scsi8 : Adaptec AIC79XX PCI-X SCSI HBA
DRIVER, Rev 3.0
Nov 3 10:28:50 xxxxxxxxxx kernel: <Adaptec 29320LPE PCIe Ultra320 SCSI
adapter>
Nov 3 10:28:50 xxxxxxxxxx kernel: scsi9 : Adaptec AIC79XX PCI-X SCSI HBA
DRIVER, Rev 3.0
Nov 3 10:28:50 xxxxxxxxxx kernel: <Adaptec 29320ALP PCIx Ultra320 SCSI
adapter>

# lspci | grep -i adaptec
05:04.0 SCSI storage controller: Adaptec ASC-29320ALP U320 (rev 10)
08:01.0 SCSI storage controller: Adaptec ASC-29320ALP U320 (rev 10)
1c:01.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01)

# After setting the iu parameter to 0 in all of my drives, you can see
the speed reduce to U160 from U320
echo 0 > "/sys/class/spi_transport/target${PCI_TARGET}\:0\:$i/iu"

Nov 6 07:52:22 xxx kernel: target34:0:1: FAST-160 WIDE SCSI 320.0 MB/s
DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
Nov 6 07:52:22 xxx kernel: target34:0:2: FAST-160 WIDE SCSI 320.0 MB/s
DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
Nov 6 07:52:22 xxx kernel: target34:0:3: FAST-160 WIDE SCSI 320.0 MB/s
DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
Nov 6 07:52:22 xxx kernel: target34:0:4: FAST-160 WIDE SCSI 320.0 MB/s
DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
Nov 6 07:52:22 xxx kernel: target34:0:5: FAST-160 WIDE SCSI 320.0 MB/s
DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
Nov 6 07:52:22 xxx kernel: target34:0:6: FAST-160 WIDE SCSI 320.0 MB/s
DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
Nov 6 07:52:22 xxx kernel: target34:0:8: FAST-160 WIDE SCSI 320.0 MB/s
DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
Nov 6 07:52:24 xxx kernel: target34:0:15: FAST-160 WIDE SCSI 320.0 MB/s
DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
Nov 6 07:52:25 xxx kernel: target34:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT
(12.5 ns, offset 63)
Nov 6 07:52:25 xxx kernel: target34:0:6: FAST-80 WIDE SCSI 160.0 MB/s DT
(12.5 ns, offset 63)
Nov 6 07:52:25 xxx kernel: target34:0:5: FAST-80 WIDE SCSI 160.0 MB/s DT
(12.5 ns, offset 63)
Nov 6 07:52:25 xxx kernel: target34:0:15: FAST-80 WIDE SCSI 160.0 MB/s
DT (12.5 ns, offset 63)
Nov 6 07:52:26 xxx kernel: target34:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT
(12.5 ns, offset 63)
Nov 6 07:52:26 xxx kernel: target34:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT
(12.5 ns, offset 63)
Nov 6 07:52:26 xxx kernel: target34:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT
(12.5 ns, offset 63)
Nov 6 07:52:26 xxx kernel: target34:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT
(12.5 ns, offset 63)

# Here is a pretty complete snapshot of the error messages for one SCSI
drive, note that this test has started at 13:21, so the first errors
does not occur for nearly 7 hours.

# Here's the first message in the logs for 32:0:1:0 (note this is
originaly scsi9, but has been renamed by removing and adding back the
kernel module
# This will repeat for the other 7 devices on the SCSI bus
Nov 5 20:06:11 xxx kernel: sd 32:0:1:0: Attempting to queue an ABORT
message:CDB: 0x28 0x0 0x5 0x8b 0x89 0xf8 0x0 0x0
0x2 0x0
Nov 5 20:06:11 xxx kernel: scsi32: At time of recovery, card was not
paused
Nov 5 20:06:11 xxx kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<<
Nov 5 20:06:11 xxx kernel: scsi32: Dumping Card State at program address
0x215 Mode 0x11
Nov 5 20:06:11 xxx kernel: Card was paused
Nov 5 20:06:11 xxx kernel: INTSTAT[0x0] SELOID[0x4] SELID[0x10]
HS_MAILBOX[0x0]
Nov 5 20:06:11 xxx kernel: INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]
Nov 5 20:06:11 xxx kernel: SCSISIGI[0x64] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x60]
Nov 5 20:06:11 xxx kernel: SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0]
Nov 5 20:06:11 xxx kernel: SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4]
QFREEZE_COUNT[0xf]

Nov 5 20:06:11 xxx kernel: KERNEL_QFREEZE_COUNT[0xf]
MK_MESSAGE_SCB[0xff00]
Nov 5 20:06:11 xxx kernel: MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0]
SSTAT1[0x8]
Nov 5 20:06:11 xxx kernel: SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]
Nov 5 20:06:11 xxx kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0]
Nov 5 20:06:11 xxx kernel: LQOSTAT1[0x0] LQOSTAT2[0x0]
Nov 5 20:06:11 xxx kernel:
Nov 5 20:06:11 xxx kernel: SCB Count = 32 CMDS_PENDING = 26 LASTSCB 0x6
CURRSCB 0x16 NEXTSCB 0xff00
Nov 5 20:06:11 xxx kernel: qinstart = 33233 qinfifonext = 33233
Nov 5 20:06:11 xxx kernel: QINFIFO:
Nov 5 20:06:11 xxx kernel: WAITING_TID_QUEUES:
Nov 5 20:06:11 xxx kernel: 1 ( 0x14 0x15 0xd 0x12 )
Nov 5 20:06:11 xxx kernel: 5 ( 0x10 0x8 0x6 0x1a )
Nov 5 20:06:11 xxx kernel: 6 ( 0x1f 0x0 0x9 0x11 )
Nov 5 20:06:11 xxx kernel: 8 ( 0x1 0xc 0x2 0x3 )
Nov 5 20:06:11 xxx kernel: 3 ( 0xe 0x17 0xb )
Nov 5 20:06:11 xxx kernel: 15 ( 0x4 0x1b 0xa 0x18 )
Nov 5 20:06:11 xxx kernel: 4 ( 0x13 0x19 )
Nov 5 20:06:11 xxx kernel: Pending list:
Nov 5 20:06:11 xxx kernel: 24 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0xf7]
Nov 5 20:06:11 xxx kernel: 10 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0xf7]
Nov 5 20:06:11 xxx kernel: 11 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 20:06:11 xxx kernel: 23 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 20:06:11 xxx kernel: 3 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x87]
Nov 5 20:06:11 xxx kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x87]
Nov 5 20:06:11 xxx kernel: 17 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x67]
Nov 5 20:06:11 xxx kernel: 9 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x67]
Nov 5 20:06:11 xxx kernel: 26 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 20:06:11 xxx kernel: 6 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 20:06:11 xxx kernel: 18 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 20:06:11 xxx kernel: 25 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x47]
Nov 5 20:06:11 xxx kernel: 19 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x47]
Nov 5 20:06:11 xxx kernel: 13 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 20:06:11 xxx kernel: 27 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0xf7]
Nov 5 20:06:11 xxx kernel: 4 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0xf7]
Nov 5 20:06:11 xxx kernel: 14 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 20:06:11 xxx kernel: 12 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x87]
Nov 5 20:06:11 xxx kernel: 1 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x87]
Nov 5 20:06:11 xxx kernel: 0 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x67]
Nov 5 20:06:11 xxx kernel: 31 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x67]
Nov 5 20:06:11 xxx kernel: 8 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 20:06:11 xxx kernel: 16 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 20:06:11 xxx kernel: 21 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 20:06:11 xxx kernel: 20 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 20:06:11 xxx kernel: 22 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x47]
Nov 5 20:06:11 xxx kernel: Total 26
Nov 5 20:06:11 xxx kernel: Kernel Free SCB list: 5 7 15 30 29 28
Nov 5 20:06:11 xxx kernel: Sequencer Complete DMA-inprog list:
Nov 5 20:06:11 xxx kernel: Sequencer Complete list:
Nov 5 20:06:11 xxx kernel: Sequencer DMA-Up and Complete list:
Nov 5 20:06:11 xxx kernel: Sequencer On QFreeze and Complete list:
Nov 5 20:06:11 xxx kernel:
Nov 5 20:06:11 xxx kernel:
Nov 5 20:06:11 xxx kernel: scsi32: FIFO0 Free, LONGJMP == 0x8254, SCB
0x0
Nov 5 20:06:11 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]
Nov 5 20:06:11 xxx kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 20:06:11 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00,
SHCNT = 0x0
Nov 5 20:06:11 xxx kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 20:06:11 xxx kernel:
Nov 5 20:06:11 xxx kernel: scsi32: FIFO1 Active, LONGJMP == 0x81f2, SCB
0x16
Nov 5 20:06:11 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x8]
DFSTATUS[0x89]
Nov 5 20:06:11 xxx kernel: SG_CACHE_SHADOW[0x3] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 20:06:11 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR =
0x024e4c000, SHCNT = 0x0
Nov 5 20:06:11 xxx kernel: HADDR = 0x024e4c000, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 20:06:11 xxx kernel: LQIN: 0x8 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 20:06:11 xxx kernel: scsi32: LQISTATE = 0x0, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Nov 5 20:06:11 xxx kernel: scsi32: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Nov 5 20:06:11 xxx kernel: scsi32: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Nov 5 20:06:11 xxx kernel: SIMODE0[0xc]
Nov 5 20:06:11 xxx kernel: CCSCBCTL[0x4]
Nov 5 20:06:11 xxx kernel: scsi32: REG0 == 0x5, SINDEX = 0x120, DINDEX =
0x120
Nov 5 20:06:11 xxx kernel: scsi32: SCBPTR == 0x16, SCB_NEXT == 0x13,
SCB_NEXT2 == 0x14
Nov 5 20:06:11 xxx kernel: CDB 28 0 6 80 1 89
Nov 5 20:06:11 xxx kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 20:06:11 xxx kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>>>>>>>>
Nov 5 20:06:11 xxx kernel: scsi32:0:1:0: Cmd aborted from QINFIFO
Nov 5 20:06:21 xxx kernel: sd 32:0:1:0: Attempting to queue an ABORT
message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 20:06:21 xxx kernel: scsi32: At time of recovery, card was not
paused
Nov 5 20:06:21 xxx kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<<
Nov 5 20:06:21 xxx kernel: scsi32: Dumping Card State at program address
0x215 Mode 0x11
Nov 5 20:06:21 xxx kernel: Card was paused
Nov 5 20:06:21 xxx kernel: INTSTAT[0x0] SELOID[0x4] SELID[0x10]
HS_MAILBOX[0x0]
Nov 5 20:06:21 xxx kernel: INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]
Nov 5 20:06:21 xxx kernel: SCSISIGI[0x64] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x60]
Nov 5 20:06:21 xxx kernel: SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0]
Nov 5 20:06:21 xxx kernel: SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4]
QFREEZE_COUNT[0xf]
Nov 5 20:06:21 xxx kernel: KERNEL_QFREEZE_COUNT[0xf]
MK_MESSAGE_SCB[0xff00]
Nov 5 20:06:21 xxx kernel: MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0]
SSTAT1[0x8]
Nov 5 20:06:21 xxx kernel: SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]
Nov 5 20:06:21 xxx kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0]
Nov 5 20:06:21 xxx kernel: LQOSTAT1[0x0] LQOSTAT2[0x0]
Nov 5 20:06:21 xxx kernel:
Nov 5 20:06:21 xxx kernel: SCB Count = 32 CMDS_PENDING = 22 LASTSCB 0x6
CURRSCB 0x16 NEXTSCB 0xff00
Nov 5 20:06:21 xxx kernel: qinstart = 33233 qinfifonext = 33234
Nov 5 20:06:21 xxx kernel: QINFIFO: 0x12
Nov 5 20:06:21 xxx kernel: WAITING_TID_QUEUES:
Nov 5 20:06:21 xxx kernel: 5 ( 0x10 0x8 0x6 0x1a )
Nov 5 20:06:21 xxx kernel: 6 ( 0x1f 0x0 0x9 0x11 )
Nov 5 20:06:21 xxx kernel: 8 ( 0x1 0xc 0x2 0x3 )
Nov 5 20:06:21 xxx kernel: 3 ( 0xe 0x17 0xb )
Nov 5 20:06:21 xxx kernel: 15 ( 0x4 0x1b 0xa 0x18 )
Nov 5 20:06:21 xxx kernel: 4 ( 0x13 0x19 )

Nov 5 20:06:21 xxx kernel: Pending list:
Nov 5 20:06:21 xxx kernel: 18 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 20:06:21 xxx kernel: 24 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0xf7]
Nov 5 20:06:21 xxx kernel: 10 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0xf7]
Nov 5 20:06:21 xxx kernel: 11 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 20:06:21 xxx kernel: 23 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 20:06:21 xxx kernel: 3 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x87]
Nov 5 20:06:21 xxx kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x87]
Nov 5 20:06:21 xxx kernel: 17 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x67]
Nov 5 20:06:21 xxx kernel: 9 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x67]
Nov 5 20:06:21 xxx kernel: 26 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 20:06:21 xxx kernel: 6 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 20:06:21 xxx kernel: 25 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x47]
Nov 5 20:06:21 xxx kernel: 19 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x47]
Nov 5 20:06:21 xxx kernel: 27 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0xf7]
Nov 5 20:06:21 xxx kernel: 4 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0xf7]
Nov 5 20:06:21 xxx kernel: 14 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 20:06:21 xxx kernel: 12 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x87]
Nov 5 20:06:21 xxx kernel: 1 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x87]
Nov 5 20:06:21 xxx kernel: 0 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x67]
Nov 5 20:06:21 xxx kernel: 31 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x67]
Nov 5 20:06:21 xxx kernel: 8 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 20:06:21 xxx kernel: 16 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 20:06:21 xxx kernel: 22 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x47]
Nov 5 20:06:21 xxx kernel: Total 23
Nov 5 20:06:21 xxx kernel: Kernel Free SCB list: 13 21 20 5 7 15 30 29
28
Nov 5 20:06:21 xxx kernel: Sequencer Complete DMA-inprog list:
Nov 5 20:06:21 xxx kernel: Sequencer Complete list:
Nov 5 20:06:21 xxx kernel: Sequencer DMA-Up and Complete list:
Nov 5 20:06:21 xxx kernel: Sequencer On QFreeze and Complete list:
Nov 5 20:06:21 xxx kernel:
Nov 5 20:06:21 xxx kernel:
Nov 5 20:06:21 xxx kernel: scsi32: FIFO0 Free, LONGJMP == 0x8254, SCB
0x0
Nov 5 20:06:21 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]
Nov 5 20:06:21 xxx kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 20:06:21 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00,
SHCNT = 0x0
Nov 5 20:06:21 xxx kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 20:06:21 xxx kernel:
Nov 5 20:06:21 xxx kernel: scsi32: FIFO1 Active, LONGJMP == 0x81f2, SCB
0x16
Nov 5 20:06:21 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x8]
DFSTATUS[0x89]
Nov 5 20:06:21 xxx kernel: SG_CACHE_SHADOW[0x3] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 20:06:21 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR =
0x024e4c000, SHCNT = 0x0
Nov 5 20:06:21 xxx kernel: HADDR = 0x024e4c000, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 20:06:21 xxx kernel: LQIN: 0x8 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 20:06:21 xxx kernel: scsi32: LQISTATE = 0x0, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Nov 5 20:06:21 xxx kernel: scsi32: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Nov 5 20:06:21 xxx kernel: scsi32: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Nov 5 20:06:21 xxx kernel: SIMODE0[0xc]
Nov 5 20:06:21 xxx kernel: CCSCBCTL[0x4]
Nov 5 20:06:21 xxx kernel: scsi32: REG0 == 0x5, SINDEX = 0x120, DINDEX =
0x120
Nov 5 20:06:21 xxx kernel: scsi32: SCBPTR == 0x16, SCB_NEXT == 0x13,
SCB_NEXT2 == 0x14
Nov 5 20:06:21 xxx kernel: CDB 28 0 6 80 1 89
Nov 5 20:06:21 xxx kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 20:06:21 xxx kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>>>>>>>>
Nov 5 20:06:21 xxx kernel: scsi32:0:1:0: Cmd aborted from QINFIFO

# Followed a few minutes later by:
# This will repeat for the other 7 devices on the SCSI bus
Nov 5 20:10:31 xxx kernel: sd 32:0:1:0: Attempting to queue a TARGET
RESET message:CDB: 0x28 0x0 0x5 0x8b 0x89 0xf8 0x
0 0x0 0x2 0x0
Nov 5 20:10:31 xxx kernel: scsi32: Device reset code sleeping
Nov 5 20:10:36 xxx kernel: scsi32: Device reset timer expired (active 1)
Nov 5 20:10:36 xxx kernel: scsi32: Device reset returning 0x2003

# Several hours later we see this message for the second time .... the
drives are NOT going to recover this time
# This will repeat for the other 7 devices on the SCSI bus
Nov 5 23:08:39 xxx kernel: sd 32:0:1:0: Attempting to queue an ABORT
message:CDB: 0x28 0x0 0x4 0x91 0x31 0xf8 0x0 0x0
0x2 0x0
Nov 5 23:08:39 xxx kernel: scsi32: At time of recovery, card was not
paused
Nov 5 23:08:39 xxx kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<<
Nov 5 23:08:39 xxx kernel: scsi32: Dumping Card State at program address
0x215 Mode 0x11
Nov 5 23:08:39 xxx kernel: Card was paused
Nov 5 23:08:39 xxx kernel: INTSTAT[0x0] SELOID[0x3] SELID[0x30]
HS_MAILBOX[0x40]
Nov 5 23:08:39 xxx kernel: INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]
Nov 5 23:08:39 xxx kernel: SCSISIGI[0x64] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x60]
Nov 5 23:08:39 xxx kernel: SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0]
Nov 5 23:08:39 xxx kernel: SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4]
QFREEZE_COUNT[0x17]
Nov 5 23:08:39 xxx kernel: KERNEL_QFREEZE_COUNT[0x17]
MK_MESSAGE_SCB[0xff00]
Nov 5 23:08:39 xxx kernel: MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0]
SSTAT1[0x8]
Nov 5 23:08:39 xxx kernel: SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]
Nov 5 23:08:39 xxx kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0]
Nov 5 23:08:39 xxx kernel: LQOSTAT1[0x0] LQOSTAT2[0x0]
Nov 5 23:08:39 xxx kernel:
Nov 5 23:08:39 xxx kernel: SCB Count = 32 CMDS_PENDING = 7 LASTSCB 0x6
CURRSCB 0x8 NEXTSCB 0xff00
Nov 5 23:08:39 xxx kernel: qinstart = 61346 qinfifonext = 61348
Nov 5 23:08:39 xxx kernel: QINFIFO: 0x1 0xd
Nov 5 23:08:39 xxx kernel: WAITING_TID_QUEUES:
Nov 5 23:08:39 xxx kernel: 1 ( 0x13 0x17 0x1b 0x2 )
Nov 5 23:08:39 xxx kernel: 5 ( 0x14 0x16 )
Nov 5 23:08:39 xxx kernel: Pending list:
Nov 5 23:08:39 xxx kernel: 13 FIFO_USE[0x0] SCB_CONTROL[0x68]
SCB_SCSIID[0x57]
Nov 5 23:08:39 xxx kernel: 1 FIFO_USE[0x0] SCB_CONTROL[0x68]
SCB_SCSIID[0x57]
Nov 5 23:08:39 xxx kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 23:08:39 xxx kernel: 27 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 23:08:39 xxx kernel: 22 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 23:08:39 xxx kernel: 20 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 23:08:39 xxx kernel: 23 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 23:08:39 xxx kernel: 19 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 23:08:39 xxx kernel: 8 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 23:08:39 xxx kernel: Total 9
Nov 5 23:08:39 xxx kernel: Kernel Free SCB list: 26 17 0 15 9 6 21 7 3
31 4 14 12 24 11 25 18 16 10 5 30 29 28
Nov 5 23:08:39 xxx kernel: Sequencer Complete DMA-inprog list:
Nov 5 23:08:39 xxx kernel: Sequencer Complete list:
Nov 5 23:08:39 xxx kernel: Sequencer DMA-Up and Complete list:
Nov 5 23:08:39 xxx kernel: Sequencer On QFreeze and Complete list:
Nov 5 23:08:39 xxx kernel:
Nov 5 23:08:39 xxx kernel:
Nov 5 23:08:39 xxx kernel: scsi32: FIFO0 Free, LONGJMP == 0x8054, SCB
0x0
Nov 5 23:08:39 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]
Nov 5 23:08:39 xxx kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 23:08:39 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00,
SHCNT = 0x0
Nov 5 23:08:39 xxx kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 23:08:39 xxx kernel:
Nov 5 23:08:39 xxx kernel: scsi32: FIFO1 Active, LONGJMP == 0x81f2, SCB
0x8
Nov 5 23:08:39 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x8]
DFSTATUS[0x89]
Nov 5 23:08:39 xxx kernel: SG_CACHE_SHADOW[0x3] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 23:08:39 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR =
0x0275b1000, SHCNT = 0x0
Nov 5 23:08:39 xxx kernel: HADDR = 0x0275b1000, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 23:08:39 xxx kernel: LQIN: 0x8 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:39 xxx kernel: scsi32: LQISTATE = 0x0, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Nov 5 23:08:39 xxx kernel: scsi32: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Nov 5 23:08:39 xxx kernel: scsi32: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Nov 5 23:08:39 xxx kernel: SIMODE0[0xc]
Nov 5 23:08:39 xxx kernel: CCSCBCTL[0x4]
Nov 5 23:08:39 xxx kernel: scsi32: REG0 == 0x5, SINDEX = 0x102, DINDEX =
0x104
Nov 5 23:08:39 xxx kernel: scsi32: SCBPTR == 0x8, SCB_NEXT == 0xb,
SCB_NEXT2 == 0xc
Nov 5 23:08:39 xxx kernel: CDB 28 0 5 80 1 91
Nov 5 23:08:39 xxx kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:39 xxx kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>>>>>>>>
Nov 5 23:08:39 xxx kernel: scsi32:0:1:0: Cmd aborted from QINFIFO
Nov 5 23:08:49 xxx kernel: sd 32:0:1:0: Attempting to queue an ABORT
message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:49 xxx kernel: scsi32: At time of recovery, card was not
paused
Nov 5 23:08:49 xxx kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<<
Nov 5 23:08:49 xxx kernel: scsi32: Dumping Card State at program address
0x215 Mode 0x11
Nov 5 23:08:49 xxx kernel: Card was paused
Nov 5 23:08:49 xxx kernel: INTSTAT[0x0] SELOID[0x3] SELID[0x30]
HS_MAILBOX[0x40]
Nov 5 23:08:49 xxx kernel: INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]
Nov 5 23:08:49 xxx kernel: SCSISIGI[0x64] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x60]
Nov 5 23:08:49 xxx kernel: SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0]
Nov 5 23:08:49 xxx kernel: SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4]
QFREEZE_COUNT[0x17]
Nov 5 23:08:49 xxx kernel: KERNEL_QFREEZE_COUNT[0x17]
MK_MESSAGE_SCB[0xff00]
Nov 5 23:08:49 xxx kernel: MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0]
SSTAT1[0x8]
Nov 5 23:08:49 xxx kernel: SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]
Nov 5 23:08:49 xxx kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0]
Nov 5 23:08:49 xxx kernel: LQOSTAT1[0x0] LQOSTAT2[0x0]
Nov 5 23:08:49 xxx kernel:
Nov 5 23:08:49 xxx kernel: SCB Count = 32 CMDS_PENDING = 3 LASTSCB 0x6
CURRSCB 0x8 NEXTSCB 0xff00
Nov 5 23:08:49 xxx kernel: qinstart = 61346 qinfifonext = 61349
Nov 5 23:08:49 xxx kernel: QINFIFO: 0x1 0xd 0x2
Nov 5 23:08:49 xxx kernel: WAITING_TID_QUEUES:
Nov 5 23:08:49 xxx kernel: 5 ( 0x14 0x16 )
Nov 5 23:08:49 xxx kernel: Pending list:
Nov 5 23:08:49 xxx kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 23:08:49 xxx kernel: 13 FIFO_USE[0x0] SCB_CONTROL[0x68]
SCB_SCSIID[0x57]
Nov 5 23:08:49 xxx kernel: 1 FIFO_USE[0x0] SCB_CONTROL[0x68]
SCB_SCSIID[0x57]
Nov 5 23:08:49 xxx kernel: 22 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 23:08:49 xxx kernel: 20 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 23:08:49 xxx kernel: 8 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 23:08:49 xxx kernel: Total 6
Nov 5 23:08:49 xxx kernel: Kernel Free SCB list: 27 23 19 26 17 0 15 9 6
21 7 3 31 4 14 12 24 11 25 18 16 10 5 30 29 2
8
Nov 5 23:08:49 xxx kernel: Sequencer Complete DMA-inprog list:
Nov 5 23:08:49 xxx kernel: Sequencer Complete list:
Nov 5 23:08:49 xxx kernel: Sequencer DMA-Up and Complete list:
Nov 5 23:08:49 xxx kernel: Sequencer On QFreeze and Complete list:
Nov 5 23:08:49 xxx kernel:
Nov 5 23:08:49 xxx kernel:
Nov 5 23:08:49 xxx kernel: scsi32: FIFO0 Free, LONGJMP == 0x8054, SCB
0x0
Nov 5 23:08:49 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]
Nov 5 23:08:49 xxx kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 23:08:49 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00,
SHCNT = 0x0
Nov 5 23:08:49 xxx kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 23:08:49 xxx kernel:
Nov 5 23:08:49 xxx kernel: scsi32: FIFO1 Active, LONGJMP == 0x81f2, SCB
0x8
Nov 5 23:08:49 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x8]
DFSTATUS[0x89]
Nov 5 23:08:49 xxx kernel: SG_CACHE_SHADOW[0x3] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 23:08:49 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR =
0x0275b1000, SHCNT = 0x0
Nov 5 23:08:49 xxx kernel: HADDR = 0x0275b1000, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 23:08:49 xxx kernel: LQIN: 0x8 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:49 xxx kernel: scsi32: LQISTATE = 0x0, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Nov 5 23:08:49 xxx kernel: scsi32: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Nov 5 23:08:49 xxx kernel: scsi32: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Nov 5 23:08:49 xxx kernel: SIMODE0[0xc]
Nov 5 23:08:49 xxx kernel: CCSCBCTL[0x4]
Nov 5 23:08:49 xxx kernel: scsi32: REG0 == 0x5, SINDEX = 0x102, DINDEX =
0x104
Nov 5 23:08:49 xxx kernel: scsi32: SCBPTR == 0x8, SCB_NEXT == 0xb,
SCB_NEXT2 == 0xc
Nov 5 23:08:49 xxx kernel: CDB 28 0 5 80 1 91
Nov 5 23:08:49 xxx kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:49 xxx kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>>>>>>>>
Nov 5 23:08:49 xxx kernel: scsi32:0:1:0: Cmd aborted from QINFIFO
Nov 5 23:08:49 xxx kernel: sd 32:0:1:0: Attempting to queue an ABORT
message:CDB: 0x28 0x0 0x4 0x91 0x31 0xfa 0x0 0x0
0xfe 0x0
Nov 5 23:08:49 xxx kernel: sd 32:0:1:0: Command not found
Nov 5 23:08:59 xxx kernel: sd 32:0:1:0: Attempting to queue an ABORT
message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:59 xxx kernel: scsi32: At time of recovery, card was not
paused
Nov 5 23:08:59 xxx kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<<
Nov 5 23:08:59 xxx kernel: scsi32: Dumping Card State at program address
0x215 Mode 0x11
Nov 5 23:08:59 xxx kernel: Card was paused
Nov 5 23:08:59 xxx kernel: INTSTAT[0x0] SELOID[0x3] SELID[0x30]
HS_MAILBOX[0x40]
Nov 5 23:08:59 xxx kernel: INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]
Nov 5 23:08:59 xxx kernel: SCSISIGI[0x64] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x60]
Nov 5 23:08:59 xxx kernel: SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0]
Nov 5 23:08:59 xxx kernel: SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4]
QFREEZE_COUNT[0x17]
Nov 5 23:08:59 xxx kernel: KERNEL_QFREEZE_COUNT[0x17]
MK_MESSAGE_SCB[0xff00]
Nov 5 23:08:59 xxx kernel: MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0]
SSTAT1[0x8]
Nov 5 23:08:59 xxx kernel: SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]
Nov 5 23:08:59 xxx kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0]
Nov 5 23:08:59 xxx kernel: LQOSTAT1[0x0] LQOSTAT2[0x0]
Nov 5 23:08:59 xxx kernel:
Nov 5 23:08:59 xxx kernel: SCB Count = 32 CMDS_PENDING = 3 LASTSCB 0x6
CURRSCB 0x8 NEXTSCB 0xff00
Nov 5 23:08:59 xxx kernel: qinstart = 61346 qinfifonext = 61349
Nov 5 23:08:59 xxx kernel: QINFIFO: 0x1 0xd 0x2
Nov 5 23:08:59 xxx kernel: WAITING_TID_QUEUES:
Nov 5 23:08:59 xxx kernel: 5 ( 0x14 0x16 )
Nov 5 23:08:59 xxx kernel: Pending list:
Nov 5 23:08:59 xxx kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x17]
Nov 5 23:08:59 xxx kernel: 13 FIFO_USE[0x0] SCB_CONTROL[0x68]
SCB_SCSIID[0x57]
Nov 5 23:08:59 xxx kernel: 1 FIFO_USE[0x0] SCB_CONTROL[0x68]
SCB_SCSIID[0x57]
Nov 5 23:08:59 xxx kernel: 22 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 23:08:59 xxx kernel: 20 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 23:08:59 xxx kernel: 8 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 23:08:59 xxx kernel: Total 6
Nov 5 23:08:59 xxx kernel: Kernel Free SCB list: 27 23 19 26 17 0 15 9 6
21 7 3 31 4 14 12 24 11 25 18 16 10 5 30 29 2
8
Nov 5 23:08:59 xxx kernel: Sequencer Complete DMA-inprog list:
Nov 5 23:08:59 xxx kernel: Sequencer Complete list:
Nov 5 23:08:59 xxx kernel: Sequencer DMA-Up and Complete list:
Nov 5 23:08:59 xxx kernel: Sequencer On QFreeze and Complete list:
Nov 5 23:08:59 xxx kernel:
Nov 5 23:08:59 xxx kernel:
Nov 5 23:08:59 xxx kernel: scsi32: FIFO0 Free, LONGJMP == 0x8054, SCB
0x0
Nov 5 23:08:59 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]
Nov 5 23:08:59 xxx kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 23:08:59 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00,
SHCNT = 0x0
Nov 5 23:08:59 xxx kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 23:08:59 xxx kernel:
Nov 5 23:08:59 xxx kernel: scsi32: FIFO1 Active, LONGJMP == 0x81f2, SCB
0x8
Nov 5 23:08:59 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x8]
DFSTATUS[0x89]
Nov 5 23:08:59 xxx kernel: SG_CACHE_SHADOW[0x3] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 23:08:59 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR =
0x0275b1000, SHCNT = 0x0
Nov 5 23:08:59 xxx kernel: HADDR = 0x0275b1000, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 23:08:59 xxx kernel: LQIN: 0x8 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:59 xxx kernel: scsi32: LQISTATE = 0x0, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Nov 5 23:08:59 xxx kernel: scsi32: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Nov 5 23:08:59 xxx kernel: scsi32: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Nov 5 23:08:59 xxx kernel: SIMODE0[0xc]
Nov 5 23:08:59 xxx kernel: CCSCBCTL[0x4]
Nov 5 23:08:59 xxx kernel: scsi32: REG0 == 0x5, SINDEX = 0x102, DINDEX =
0x104
Nov 5 23:08:59 xxx kernel: scsi32: SCBPTR == 0x8, SCB_NEXT == 0xb,
SCB_NEXT2 == 0xc
Nov 5 23:08:59 xxx kernel: CDB 28 0 5 80 1 91
Nov 5 23:08:59 xxx kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:59 xxx kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>>>>>>>>
Nov 5 23:08:59 xxx kernel: scsi32:0:1:0: Cmd aborted from QINFIFO
Nov 5 23:08:59 xxx kernel: sd 32:0:5:0: Attempting to queue an ABORT
message:CDB: 0x28 0x0 0x5 0x44 0xbf 0x0 0x0 0x0 0
x8 0x0
Nov 5 23:08:59 xxx kernel: scsi32: At time of recovery, card was not
paused
Nov 5 23:08:59 xxx kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<<
Nov 5 23:08:59 xxx kernel: scsi32: Dumping Card State at program address
0x215 Mode 0x11
Nov 5 23:08:59 xxx kernel: Card was paused
Nov 5 23:08:59 xxx kernel: INTSTAT[0x0] SELOID[0x3] SELID[0x30]
HS_MAILBOX[0x40]
Nov 5 23:08:59 xxx kernel: INTCTL[0xc0] SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x19]
Nov 5 23:08:59 xxx kernel: SCSISIGI[0x64] SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x60]
Nov 5 23:08:59 xxx kernel: SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
SEQINTCTL[0x0]
Nov 5 23:08:59 xxx kernel: SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4]
QFREEZE_COUNT[0x17]
Nov 5 23:08:59 xxx kernel: KERNEL_QFREEZE_COUNT[0x17]
MK_MESSAGE_SCB[0xff00]
Nov 5 23:08:59 xxx kernel: MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0]
SSTAT1[0x8]
Nov 5 23:08:59 xxx kernel: SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]
Nov 5 23:08:59 xxx kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0]
Nov 5 23:08:59 xxx kernel: LQOSTAT1[0x0] LQOSTAT2[0x0]
Nov 5 23:08:59 xxx kernel:
Nov 5 23:08:59 xxx kernel: SCB Count = 32 CMDS_PENDING = 3 LASTSCB 0x6
CURRSCB 0x8 NEXTSCB 0xff00
Nov 5 23:08:59 xxx kernel: qinstart = 61346 qinfifonext = 61348
Nov 5 23:08:59 xxx kernel: QINFIFO: 0x1 0xd
Nov 5 23:08:59 xxx kernel: WAITING_TID_QUEUES:
Nov 5 23:08:59 xxx kernel: 5 ( 0x14 0x16 )
Nov 5 23:08:59 xxx kernel: Pending list:
Nov 5 23:08:59 xxx kernel: 13 FIFO_USE[0x0] SCB_CONTROL[0x68]
SCB_SCSIID[0x57]
Nov 5 23:08:59 xxx kernel: 1 FIFO_USE[0x0] SCB_CONTROL[0x68]
SCB_SCSIID[0x57]
Nov 5 23:08:59 xxx kernel: 22 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 23:08:59 xxx kernel: 20 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x57]
Nov 5 23:08:59 xxx kernel: 8 FIFO_USE[0x0] SCB_CONTROL[0x60]
SCB_SCSIID[0x37]
Nov 5 23:08:59 xxx kernel: Total 5
Nov 5 23:08:59 xxx kernel: Kernel Free SCB list: 2 27 23 19 26 17 0 15 9
6 21 7 3 31 4 14 12 24 11 25 18 16 10 5 30 29
28
Nov 5 23:08:59 xxx kernel: Sequencer Complete DMA-inprog list:
Nov 5 23:08:59 xxx kernel: Sequencer Complete list:
Nov 5 23:08:59 xxx kernel: Sequencer DMA-Up and Complete list:
Nov 5 23:08:59 xxx kernel: Sequencer On QFreeze and Complete list:
Nov 5 23:08:59 xxx kernel:
Nov 5 23:08:59 xxx kernel:
Nov 5 23:08:59 xxx kernel: scsi32: FIFO0 Free, LONGJMP == 0x8054, SCB
0x0
Nov 5 23:08:59 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]
Nov 5 23:08:59 xxx kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 23:08:59 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00,
SHCNT = 0x0
Nov 5 23:08:59 xxx kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 23:08:59 xxx kernel:
Nov 5 23:08:59 xxx kernel: scsi32: FIFO1 Active, LONGJMP == 0x81f2, SCB
0x8
Nov 5 23:08:59 xxx kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x8]
DFSTATUS[0x89]
Nov 5 23:08:59 xxx kernel: SG_CACHE_SHADOW[0x3] SG_STATE[0x0]
DFFSXFRCTL[0x0]
Nov 5 23:08:59 xxx kernel: SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR =
0x0275b1000, SHCNT = 0x0
Nov 5 23:08:59 xxx kernel: HADDR = 0x0275b1000, HCNT = 0x0 CCSGCTL[0x10]
Nov 5 23:08:59 xxx kernel: LQIN: 0x8 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:59 xxx kernel: scsi32: LQISTATE = 0x0, LQOSTATE = 0x0,
OPTIONMODE = 0x52
Nov 5 23:08:59 xxx kernel: scsi32: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2
Nov 5 23:08:59 xxx kernel: scsi32: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
Nov 5 23:08:59 xxx kernel: SIMODE0[0xc]
Nov 5 23:08:59 xxx kernel: CCSCBCTL[0x4]
Nov 5 23:08:59 xxx kernel: scsi32: REG0 == 0x5, SINDEX = 0x102, DINDEX =
0x104
Nov 5 23:08:59 xxx kernel: scsi32: SCBPTR == 0x8, SCB_NEXT == 0xb,
SCB_NEXT2 == 0xc
Nov 5 23:08:59 xxx kernel: CDB 28 0 5 80 1 91
Nov 5 23:08:59 xxx kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Nov 5 23:08:59 xxx kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>>>>>>>>

# This will be followed by this again
# This will repeat for the other 7 devices on the SCSI bus
Nov 5 23:11:39 xxx kernel: sd 32:0:1:0: Attempting to queue a TARGET
RESET message:CDB: 0x28 0x0 0x4 0x91 0x31 0xf8 0x
0 0x0 0x2 0x0
Nov 5 23:11:39 xxx kernel: scsi32: Device reset code sleeping
Nov 5 23:11:44 xxx kernel: scsi32: Device reset timer expired (active 1)
Nov 5 23:11:44 xxx kernel: scsi32: Device reset returning 0x2003

# Finaly the device will go offline
# This will repeat for the other 7 devices on the SCSI bus
Nov 5 23:16:24 xxx kernel: sd 32:0:1:0: scsi: Device offlined - not
ready after error recovery

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Oleg Nesterov: "[PATCH 1/2] protect /sbin/init from unwanted signals more"
Previous message: Joe Korty: "Re: [PATCH] x86: Support always running TSC on Intel CPUs"
Next in thread: Rhine, Jay $Jay$: "RE: Devices going offline on Adaptec 29320 using driver AIC79XX after messages "Attempting to queue an ABORT message:CDB""
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]