Re: [smartmontools-support] SMART to USB/sata dock in 2.6.27-rc5doesn't work

[Mark Lord]

matthieu castet wrote:
> Hi,
>
> Tejun Heo wrote:
> > David Greaves wrote:
> > > Error Counter logging not supported
> > > Device does not support Self Test logging
> >
> > The USB bridge should support SAT (SCSI-ATA translation) and many
> > don't.  Nothing much can be done about it.  The hardware just don't know
> > how to do it.
> That true that the hardware should support SAT, but even if it support 
> it, linux need some patches to support SAT over USB. See 
> http://thread.gmane.org/gmane.linux.scsi/43688 and the patch mentioned 
> in the thread.
...

Ahh.. Great!  This mostly fixes smartctl operation on at least two
of my USB drive enclosures here:

   1. a recent rev.  2.5" NexStar-3 SATA enclosure.
   2. a 250GB 2.5" WD "Passport" external USB drive/enclosure.

With the patch, this command line works for me:

   smartctl -a -dsat -T permissive /dev/sdb 

And hdparm just works regardless, with or without the patch.


> Unfortunately I am a bit busy to try to resubmit it. But I won't care if 
> somebody improve it/resubmit it ;)
>
> Matthieu
>
> PS : there also  http://thread.gmane.org/gmane.linux.usb.general/7145 
> that is pending.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/