Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf

From: Justin Mattock
Date: Fri Jul 18 2008 - 23:43:23 EST

Next message: Arjan van de Ven: "Re: [patch 1/3] fastboot: Create a "asynchronous" initlevel"
Previous message: Justin Mattock: "macbook2,2 latest git mmconfig issues"
In reply to: Jack Howarth: "Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf"
Next in thread: Yinghai Lu: "Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Jul 18, 2008 at 8:28 PM, Jack Howarth <howarth@xxxxxxxxxxxxxxxxx> wrote:
> YH,
> The mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch both applied
> cleanly to the current linus kernel git and solve my problems with MMCONFIG not starting.
> I am attaching a dmesg log below of a boot with 'debug apic=verbose initcall_debug pci=routeirq'.
> If you look at the section immediately before the line...
>
> pci 0000:00:1e.0: transparent bridge
>
> you will see that it is radically different from what I posted for the freeze under PCIEASPM
> with MMCONFIG (using your original mmconfig patch)...
>
> PCI: 0000:00:1f.1 reg 10 io port: [ 40d8, 40df]
> PCI: 0000:00:1f.1 reg 14 io port: [ 40ec, 40ef]
> PCI: 0000:00:1f.1 reg 18 io port: [ 40d0, 40d7]
> PCI: 0000:00:1f.1 reg 1c io port: [ 40e8, 40eb]
> PCI: 0000:00:1f.1 reg 20 io port: [ 40b0, 40bf]
> pci 0000:00.1f.1: calling pci_fixup_transparent_bridge+0x0/0x2a
> PCI: Found 0000:00:1f.2 [8086/27c4] 000101 00
> PCI: 0000:00:1f.2 reg 10 io port: [ 40c8, 40cf]
> PCI: 0000:00:1f.2 reg 14 io port: [ 40e4, 40e7]
> PCI: 0000:00:1f.2 reg 18 io port: [ 40c0, 40c7]
> PCI: 0000:00:1f.2 reg 1c io port: [ 40e0, 40e3]
> PCI: 0000:00:1f.2 reg 20 io port: [ 40a0, 40af]
> PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
> pci: 0000:00:1f.2 calling pci_fixup_transparent_bridge+0x0/0x2a
> PCI: Found 0000:00:1f.3 [8086/27da] 000c05 00
> PCI: 0000:00:1f.3 reg 20 io port: [ efa0, efbf]
> PCI: 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
> PCI: Fixups for bus 0000:00
> PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
> PCI: Scanning bus 0000:01
> PCI: Found 0000:01:00.0 [1002/71c5] 000300 00
> PCI: 0000:00:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
> PCI: 0000:00:01:00.0 reg 14 io port: [ 3000, 30ff]
> PCI: 0000:00:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]
>
> Perhaps one of the PCIEASPM experts can explain why there are so
> many calls to pci_fixup_transparent_bridge and a scan behind the bridge.
> Nothing like that appears in the dmesg from your latest patch without
> PCIEASPM.
> Jack
>
> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> Linux version 2.6.27-0.156.rc0.git4.fc9.x86_64 (howarth@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Jul 18 22:02:40 EDT 2008
> Command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf0e9000 (usable)
> BIOS-e820: 00000000bf0e9000 - 00000000bf2ea000 (ACPI NVS)
> BIOS-e820: 00000000bf2ea000 - 00000000bfebe000 (ACPI data)
> BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
> BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data)
> BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> Centaur CentaurHauls
> last_pfn = 0xbf0e9 max_arch_pfn = 0x3ffffffff
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> init_memory_mapping
> 0000000000 - 00bf000000 page 2M
> 00bf000000 - 00bf0e9000 page 4k
> kernel direct mapping tables up to bf0e9000 @ 8000-d000
> last_map_addr: bf0e9000 end: bf0e9000
> RAMDISK: 37d35000 - 37fef5d1
> DMI 2.4 present.
> ACPI: RSDP 000FE020, 0024 (r2 APPLE )
> ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
> ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
> ACPI: DSDT BFEF0000, 48BD (r1 APPLE MacBookP 20001 INTL 20050309)
> ACPI: FACS BFEC0000, 0040
> ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
> ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
> ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
> ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
> ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
> ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
> ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
> ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
> ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
> ACPI: DMI detected: Apple
> No NUMA configuration found
> Faking a node at 0000000000000000-00000000bf0e9000
> Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used
> Entering add_active_range(0, 0x100, 0xbf0e9) 1 entries of 25600 used
> Bootmem setup node 0 0000000000000000-00000000bf0e9000
> NODE_DATA [000000000000b000 - 000000000001ffff]
> bootmap [0000000000020000 - 0000000000037e1f] pages 18
> (6 early reservations) ==> bootmem
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> #2 [0000200000 - 0000e5fe68] TEXT DATA BSS ==> [0000200000 - 0000e5fe68]
> #3 [0037d35000 - 0037fef5d1] RAMDISK ==> [0037d35000 - 0037fef5d1]
> #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
> #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
> Scan SMP from ffff880000000000 for 1024 bytes.
> Scan SMP from ffff88000009fc00 for 1024 bytes.
> Scan SMP from ffff8800000f0000 for 65536 bytes.
> Scan SMP from ffff88000009fc00 for 1024 bytes.
> [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880001200000-ffff8800059fffff] on node 0
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0x00000000 -> 0x0000009f
> 0: 0x00000100 -> 0x000bf0e9
> On node 0 totalpages: 782472
> DMA zone: 96 pages used for memmap
> DMA zone: 3269 pages reserved
> DMA zone: 634 pages, LIFO batch:0
> DMA32 zone: 18246 pages used for memmap
> DMA32 zone: 760227 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> mapped APIC to ffffffffff5fc000 ( fee00000)
> mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
> PERCPU: Allocating 442304 bytes of per cpu data
> NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
> Built 1 zonelists in Node order, mobility grouping on. Total pages: 760861
> Policy zone: DMA32
> Kernel command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> TSC calibrated against PM_TIMER
> Detected 2327.490 MHz processor.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> ... MAX_LOCKDEP_SUBCLASSES: 8
> ... MAX_LOCK_DEPTH: 48
> ... MAX_LOCKDEP_KEYS: 2048
> ... CLASSHASH_SIZE: 1024
> ... MAX_LOCKDEP_ENTRIES: 8192
> ... MAX_LOCKDEP_CHAINS: 16384
> ... CHAINHASH_SIZE: 8192
> memory used by lock dependency info: 1840 kB
> per task-struct memory footprint: 3456 bytes
> Checking aperture...
> No AGP bridge found
> Calgary: detecting Calgary via BIOS EBDA area
> Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> Memory: 3039268k/3130276k available (3099k kernel code, 90620k reserved, 1746k data, 1544k init)
> CPA: page pool initialized 48 of 48 pages preallocated
> SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> hpet clockevent registered
> Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4654.98 BogoMIPS (lpj=2327490)
> Security Framework initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Mount-cache hash table entries: 256
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys devices
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> CPU 0/0 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring enabled (TM2)
> using mwait in idle threads.
> ACPI: Core revision 20080609
> enabled ExtINT on CPU#0
> ENABLING IO-APIC IRQs
> init IO_APIC IRQs
> IO-APIC (apicid-pin) 1-0 not connected.
> IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
> IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
> IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
> Using local APIC timer interrupts.
> APIC timer calibration result 10390580
> Detected 10.390 MHz APIC timer.
> lockdep: fixing up alternatives.
> Booting processor 1/1 ip 6000
> Initializing CPU#1
> masked ExtINT on CPU#1
> Calibrating delay using timer specific routine.. <6>4654.79 BogoMIPS (lpj=2327398)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> CPU 1/1 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU1: Thermal monitoring enabled (TM2)
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> Total of 2 processors activated (9309.77 BogoMIPS).
> sizeof(vma)=176 bytes
> sizeof(page)=96 bytes
> sizeof(inode)=1088 bytes
> sizeof(dentry)=256 bytes
> sizeof(ext3inode)=1488 bytes
> sizeof(buffer_head)=104 bytes
> sizeof(skbuff)=232 bytes
> sizeof(task_struct)=9528 bytes
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 0 1
> domain 1: span 0-1 level NODE
> groups: 0-1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 1 0
> domain 1: span 0-1 level NODE
> groups: 0-1
> khelper used greatest stack depth: 5648 bytes left
> calling init_cpufreq_transition_notifier_list+0x0/0x20
> initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 msecs
> calling net_ns_init+0x0/0x134
> net_namespace: 1352 bytes
> initcall net_ns_init+0x0/0x134 returned 0 after 0 msecs
> calling cpufreq_tsc+0x0/0x16
> initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs
> calling init_smp_flush+0x0/0x6b
> initcall init_smp_flush+0x0/0x6b returned 0 after 0 msecs
> calling print_banner+0x0/0x13
> Booting paravirtualized kernel on bare hardware
> initcall print_banner+0x0/0x13 returned 0 after 0 msecs
> calling sysctl_init+0x0/0x37
> initcall sysctl_init+0x0/0x37 returned 0 after 0 msecs
> calling ksysfs_init+0x0/0xc0
> initcall ksysfs_init+0x0/0xc0 returned 0 after 0 msecs
> calling init_jiffies_clocksource+0x0/0x17
> initcall init_jiffies_clocksource+0x0/0x17 returned 0 after 0 msecs
> calling pm_init+0x0/0x39
> initcall pm_init+0x0/0x39 returned 0 after 0 msecs
> calling pm_disk_init+0x0/0x1e
> initcall pm_disk_init+0x0/0x1e returned 0 after 0 msecs
> calling swsusp_header_init+0x0/0x31
> initcall swsusp_header_init+0x0/0x31 returned 0 after 0 msecs
> calling ftrace_dynamic_init+0x0/0xd7
> initcall ftrace_dynamic_init+0x0/0xd7 returned 0 after 0 msecs
> calling filelock_init+0x0/0x33
> initcall filelock_init+0x0/0x33 returned 0 after 0 msecs
> calling init_misc_binfmt+0x0/0x44
> initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 msecs
> calling init_script_binfmt+0x0/0x17
> initcall init_script_binfmt+0x0/0x17 returned 0 after 0 msecs
> calling init_elf_binfmt+0x0/0x17
> initcall init_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
> calling init_compat_elf_binfmt+0x0/0x17
> initcall init_compat_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
> calling debugfs_init+0x0/0x56
> initcall debugfs_init+0x0/0x56 returned 0 after 0 msecs
> calling securityfs_init+0x0/0x56
> initcall securityfs_init+0x0/0x56 returned 0 after 0 msecs
> calling random32_init+0x0/0x5f
> initcall random32_init+0x0/0x5f returned 0 after 0 msecs
> calling early_resume_init+0x0/0x1d4
> Time: 3:06:17 Date: 07/19/08
> initcall early_resume_init+0x0/0x1d4 returned 0 after 0 msecs
> calling cpufreq_core_init+0x0/0x8f
> initcall cpufreq_core_init+0x0/0x8f returned 0 after 0 msecs
> calling cpuidle_init+0x0/0x45
> initcall cpuidle_init+0x0/0x45 returned 0 after 0 msecs
> calling sock_init+0x0/0x63
> initcall sock_init+0x0/0x63 returned 0 after 0 msecs
> calling netpoll_init+0x0/0x46
> initcall netpoll_init+0x0/0x46 returned 0 after 0 msecs
> calling netlink_proto_init+0x0/0x150
> NET: Registered protocol family 16
> initcall netlink_proto_init+0x0/0x150 returned 0 after 0 msecs
> calling bdi_class_init+0x0/0x42
> initcall bdi_class_init+0x0/0x42 returned 0 after 0 msecs
> calling kobject_uevent_init+0x0/0x47
> initcall kobject_uevent_init+0x0/0x47 returned 0 after 0 msecs
> calling pcibus_class_init+0x0/0x17
> initcall pcibus_class_init+0x0/0x17 returned 0 after 0 msecs
> calling pci_driver_init+0x0/0x17
> initcall pci_driver_init+0x0/0x17 returned 0 after 0 msecs
> calling backlight_class_init+0x0/0x4e
> initcall backlight_class_init+0x0/0x4e returned 0 after 0 msecs
> calling dock_init+0x0/0x5f
> No dock devices found.
> initcall dock_init+0x0/0x5f returned 0 after 0 msecs
> calling tty_class_init+0x0/0x2f
> initcall tty_class_init+0x0/0x2f returned 0 after 0 msecs
> calling vtconsole_class_init+0x0/0xbf
> khelper used greatest stack depth: 4904 bytes left
> initcall vtconsole_class_init+0x0/0xbf returned 0 after 0 msecs
> calling register_node_type+0x0/0x83
> initcall register_node_type+0x0/0x83 returned 0 after 0 msecs
> calling enable_pci_io_ecs+0x0/0x33
> initcall enable_pci_io_ecs+0x0/0x33 returned 0 after 0 msecs
> calling early_fill_mp_bus_info+0x0/0x80c
> initcall early_fill_mp_bus_info+0x0/0x80c returned 0 after 0 msecs
> calling arch_kdebugfs_init+0x0/0x1e0
> initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 msecs
> calling mtrr_if_init+0x0/0x7e
> initcall mtrr_if_init+0x0/0x7e returned 0 after 0 msecs
> calling ffh_cstate_init+0x0/0x36
> initcall ffh_cstate_init+0x0/0x36 returned 0 after 0 msecs
> calling acpi_pci_init+0x0/0x45
> ACPI: bus type pci registered
> initcall acpi_pci_init+0x0/0x45 returned 0 after 0 msecs
> calling init_acpi_device_notify+0x0/0x50
> initcall init_acpi_device_notify+0x0/0x50 returned 0 after 0 msecs
> calling dmi_id_init+0x0/0x2f1
> initcall dmi_id_init+0x0/0x2f1 returned 0 after 0 msecs
> calling pci_arch_init+0x0/0x53
> PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
> PCI: MCFG area at f0000000 reserved in E820
> PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
> PCI: Using MMCONFIG at f0000000 - f3ffffff
> PCI: Using configuration type 1 for base access
> initcall pci_arch_init+0x0/0x53 returned 0 after 14 msecs
> calling topology_init+0x0/0x96
> initcall topology_init+0x0/0x96 returned 0 after 0 msecs
> calling mtrr_init_finialize+0x0/0x42
> initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 msecs
> calling param_sysfs_init+0x0/0x1f3
> initcall param_sysfs_init+0x0/0x1f3 returned 0 after 9 msecs
> calling pm_sysrq_init+0x0/0x1e
> initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs
> calling readahead_init+0x0/0x3d
> initcall readahead_init+0x0/0x3d returned 0 after 0 msecs
> calling init_bio+0x0/0xca
> initcall init_bio+0x0/0xca returned 0 after 0 msecs
> calling integrity_init+0x0/0x3f
> initcall integrity_init+0x0/0x3f returned 0 after 0 msecs
> calling blk_settings_init+0x0/0x2f
> initcall blk_settings_init+0x0/0x2f returned 0 after 0 msecs
> calling blk_ioc_init+0x0/0x2f
> initcall blk_ioc_init+0x0/0x2f returned 0 after 0 msecs
> calling genhd_device_init+0x0/0x5a
> initcall genhd_device_init+0x0/0x5a returned 0 after 0 msecs
> calling blk_dev_integrity_init+0x0/0x2f
> initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 msecs
> calling pci_slot_init+0x0/0x4c
> initcall pci_slot_init+0x0/0x4c returned 0 after 0 msecs
> calling fbmem_init+0x0/0x8f
> initcall fbmem_init+0x0/0x8f returned 0 after 0 msecs
> calling acpi_init+0x0/0x226
> ACPI: EC: EC description table is found, configuring boot EC
> ACPI: EC: non-query interrupt received, switching to interrupt mode
> ACPI: BIOS _OSI(Linux) query ignored via DMI
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> initcall acpi_init+0x0/0x226 returned 0 after 25 msecs
> calling acpi_scan_init+0x0/0x10f
> initcall acpi_scan_init+0x0/0x10f returned 0 after 52 msecs
> calling acpi_ec_init+0x0/0x66
> ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
> ACPI: EC: driver started in interrupt mode
> initcall acpi_ec_init+0x0/0x66 returned 0 after 0 msecs
> calling acpi_pci_root_init+0x0/0x2d
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:01.0: PME# disabled
> PCI: 0000:00:07.0 reg 10 32bit mmio: [d8404000, d8404fff]
> PCI: 0000:00:1b.0 reg 10 64bit mmio: [d8400000, d8403fff]
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1b.0: PME# disabled
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: PME# disabled
> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.1: PME# disabled
> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.2: PME# disabled
> PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f]
> PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f]
> PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f]
> PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f]
> PCI: 0000:00:1d.7 reg 10 32bit mmio: [d8405400, d84057ff]
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: PME# disabled
> pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
> PCI: 0000:00:1f.1 reg 10 io port: [40d8, 40df]
> PCI: 0000:00:1f.1 reg 14 io port: [40ec, 40ef]
> PCI: 0000:00:1f.1 reg 18 io port: [40d0, 40d7]
> PCI: 0000:00:1f.1 reg 1c io port: [40e8, 40eb]
> PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf]
> PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf]
> PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7]
> PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7]
> PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3]
> PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af]
> PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.2: PME# disabled
> PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf]
> PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
> PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff]
> PCI: 0000:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]
> pci 0000:01:00.0: supports D1
> pci 0000:01:00.0: supports D2
> PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
> PCI: bridge 0000:00:01.0 32bit mmio: [d8300000, d83fffff]
> PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
> PCI: 0000:02:00.0 reg 10 64bit mmio: [d8200000, d8203fff]
> PCI: 0000:02:00.0 reg 18 io port: [2000, 20ff]
> pci 0000:02:00.0: supports D1
> pci 0000:02:00.0: supports D2
> pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:02:00.0: PME# disabled
> PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
> PCI: bridge 0000:00:1c.0 32bit mmio: [d8200000, d82fffff]
> PCI: 0000:03:00.0 reg 10 64bit mmio: [d8100000, d810ffff]
> pci 0000:03:00.0: supports D1
> pci 0000:03:00.0: PME# supported from D0 D1 D3hot
> pci 0000:03:00.0: PME# disabled
> PCI: bridge 0000:00:1c.1 32bit mmio: [d8100000, d81fffff]
> PCI: bridge 0000:00:1c.2 io port: [1000, 1fff]
> PCI: bridge 0000:00:1c.2 32bit mmio: [d4100000, d80fffff]
> PCI: bridge 0000:00:1c.2 64bit mmio pref: [d0000000, d3ffffff]
> PCI: 0000:0c:03.0 reg 10 32bit mmio: [d4004000, d40047ff]
> PCI: 0000:0c:03.0 reg 14 32bit mmio: [d4000000, d4003fff]
> pci 0000:0c:03.0: supports D1
> pci 0000:0c:03.0: supports D2
> pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
> pci 0000:0c:03.0: PME# disabled
> pci 0000:00:1e.0: transparent bridge
> PCI: bridge 0000:00:1e.0 32bit mmio: [d4000000, d40fffff]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> initcall acpi_pci_root_init+0x0/0x2d returned 0 after 78 msecs
> calling acpi_pci_link_init+0x0/0x4d
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
> initcall acpi_pci_link_init+0x0/0x4d returned 0 after 14 msecs
> calling acpi_power_init+0x0/0x7c
> initcall acpi_power_init+0x0/0x7c returned 0 after 0 msecs
> calling acpi_system_init+0x0/0x265
> initcall acpi_system_init+0x0/0x265 returned 0 after 0 msecs
> calling acpi_cm_sbs_init+0x0/0xd
> initcall acpi_cm_sbs_init+0x0/0xd returned 0 after 0 msecs
> calling pnp_init+0x0/0x25
> Linux Plug and Play Support v0.97 (c) Adam Belay
> initcall pnp_init+0x0/0x25 returned 0 after 0 msecs
> calling pnpacpi_init+0x0/0x91
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
> IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
> pnp: PnP ACPI: found 9 devices
> ACPI: ACPI bus type pnp unregistered
> initcall pnpacpi_init+0x0/0x91 returned 0 after 20 msecs
> calling misc_init+0x0/0x9d
> initcall misc_init+0x0/0x9d returned 0 after 0 msecs
> calling cn_init+0x0/0xf3
> initcall cn_init+0x0/0xf3 returned 0 after 0 msecs
> calling init_scsi+0x0/0x96
> SCSI subsystem initialized
> initcall init_scsi+0x0/0x96 returned 0 after 1 msecs
> calling ata_init+0x0/0x368
> libata version 3.00 loaded.
> initcall ata_init+0x0/0x368 returned 0 after 0 msecs
> calling init_pcmcia_cs+0x0/0x2d
> initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 msecs
> calling usb_init+0x0/0x131
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> initcall usb_init+0x0/0x131 returned 0 after 1 msecs
> calling serio_init+0x0/0x8e
> initcall serio_init+0x0/0x8e returned 0 after 0 msecs
> calling input_init+0x0/0x10c
> initcall input_init+0x0/0x10c returned 0 after 0 msecs
> calling rtc_init+0x0/0x75
> initcall rtc_init+0x0/0x75 returned 0 after 0 msecs
> calling power_supply_class_init+0x0/0x39
> initcall power_supply_class_init+0x0/0x39 returned 0 after 0 msecs
> calling thermal_init+0x0/0x56
> initcall thermal_init+0x0/0x56 returned 0 after 0 msecs
> calling md_init+0x0/0xd5
> initcall md_init+0x0/0xd5 returned 0 after 0 msecs
> calling leds_init+0x0/0x2f
> initcall leds_init+0x0/0x2f returned 0 after 0 msecs
> calling dma_bus_init+0x0/0x31
> initcall dma_bus_init+0x0/0x31 returned 0 after 0 msecs
> calling pci_subsys_init+0x0/0x126
> PCI: Using ACPI for IRQ routing
> PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
> IOAPIC[0]: Set routing entry (1-16 -> 0x49 -> IRQ 16 Mode:1 Active:1)
> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> IOAPIC[0]: Set routing entry (1-22 -> 0x51 -> IRQ 22 Mode:1 Active:1)
> pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> IOAPIC[0]: Set routing entry (1-17 -> 0x59 -> IRQ 17 Mode:1 Active:1)
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> IOAPIC[0]: Set routing entry (1-18 -> 0x61 -> IRQ 18 Mode:1 Active:1)
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> IOAPIC[0]: Set routing entry (1-23 -> 0x69 -> IRQ 23 Mode:1 Active:1)
> pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> IOAPIC[0]: Set routing entry (1-19 -> 0x71 -> IRQ 19 Mode:1 Active:1)
> pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> number of MP IRQ sources: 15.
> number of IO-APIC #1 registers: 24.
> testing the IO APIC.......................
>
> IO APIC #1......
> .... register #00: 00000000
> ....... : physical APIC id: 00
> .... register #01: 00170020
> ....... : max redirection entries: 0017
> ....... : PRQ implemented: 0
> ....... : IO APIC version: 0020
> .... register #02: 00170020
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
> 00 000 1 0 0 0 0 0 0 00
> 01 003 0 0 0 0 0 1 1 31
> 02 003 0 0 0 0 0 1 1 30
> 03 003 0 0 0 0 0 1 1 33
> 04 003 0 0 0 0 0 1 1 34
> 05 003 0 0 0 0 0 1 1 35
> 06 003 0 0 0 0 0 1 1 36
> 07 003 0 0 0 0 0 1 1 37
> 08 003 0 0 0 0 0 1 1 38
> 09 003 0 1 0 0 0 1 1 39
> 0a 003 0 0 0 0 0 1 1 3A
> 0b 003 0 0 0 0 0 1 1 3B
> 0c 003 0 0 0 0 0 1 1 3C
> 0d 003 0 0 0 0 0 1 1 3D
> 0e 003 0 0 0 0 0 1 1 3E
> 0f 003 0 0 0 0 0 1 1 3F
> 10 003 1 1 0 1 0 1 1 49
> 11 003 1 1 0 1 0 1 1 59
> 12 003 1 1 0 1 0 1 1 61
> 13 003 1 1 0 1 0 1 1 71
> 14 000 1 0 0 0 0 0 0 00
> 15 000 1 0 0 0 0 0 0 00
> 16 003 1 1 0 1 0 1 1 51
> 17 003 1 1 0 1 0 1 1 69
> IRQ to pin mappings:
> IRQ0 -> 0:2
> IRQ1 -> 0:1
> IRQ3 -> 0:3
> IRQ4 -> 0:4
> IRQ5 -> 0:5
> IRQ6 -> 0:6
> IRQ7 -> 0:7
> IRQ8 -> 0:8
> IRQ9 -> 0:9
> IRQ10 -> 0:10
> IRQ11 -> 0:11
> IRQ12 -> 0:12
> IRQ13 -> 0:13
> IRQ14 -> 0:14
> IRQ15 -> 0:15
> IRQ16 -> 0:16
> IRQ17 -> 0:17
> IRQ18 -> 0:18
> IRQ19 -> 0:19
> IRQ22 -> 0:22
> IRQ23 -> 0:23
> .................................... done.
> initcall pci_subsys_init+0x0/0x126 returned 0 after 21 msecs
> calling proto_init+0x0/0x33
> initcall proto_init+0x0/0x33 returned 0 after 0 msecs
> calling net_dev_init+0x0/0x1f3
> initcall net_dev_init+0x0/0x1f3 returned 0 after 0 msecs
> calling neigh_init+0x0/0x76
> initcall neigh_init+0x0/0x76 returned 0 after 0 msecs
> calling fib_rules_init+0x0/0xab
> initcall fib_rules_init+0x0/0xab returned 0 after 0 msecs
> calling pktsched_init+0x0/0xc9
> initcall pktsched_init+0x0/0xc9 returned 0 after 0 msecs
> calling tc_filter_init+0x0/0x51
> initcall tc_filter_init+0x0/0x51 returned 0 after 0 msecs
> calling tc_action_init+0x0/0x51
> initcall tc_action_init+0x0/0x51 returned 0 after 0 msecs
> calling genl_init+0x0/0xdd
> initcall genl_init+0x0/0xdd returned 0 after 3 msecs
> calling cipso_v4_init+0x0/0x8d
> initcall cipso_v4_init+0x0/0x8d returned 0 after 0 msecs
> calling wireless_nlevent_init+0x0/0x46
> initcall wireless_nlevent_init+0x0/0x46 returned 0 after 0 msecs
> calling netlbl_init+0x0/0x86
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> initcall netlbl_init+0x0/0x86 returned 0 after 0 msecs
> calling sysctl_init+0x0/0x32
> initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs
> calling pci_iommu_init+0x0/0x21
> PCI-GART: No AMD northbridge found.
> initcall pci_iommu_init+0x0/0x21 returned 0 after 0 msecs
> calling hpet_late_init+0x0/0x107
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> hpet0: 3 64-bit timers, 14318180 Hz
> initcall hpet_late_init+0x0/0x107 returned 0 after 1 msecs
> calling clocksource_done_booting+0x0/0x17
> initcall clocksource_done_booting+0x0/0x17 returned 0 after 0 msecs
> calling ftrace_init_debugfs+0x0/0xfd
> initcall ftrace_init_debugfs+0x0/0xfd returned 0 after 0 msecs
> calling tracer_alloc_buffers+0x0/0x5a1
> tracer: 1286 pages allocated for 65536 entries of 80 bytes
> actual entries 65586
> initcall tracer_alloc_buffers+0x0/0x5a1 returned 0 after 19 msecs
> calling init_pipe_fs+0x0/0x51
> initcall init_pipe_fs+0x0/0x51 returned 0 after 0 msecs
> calling init_mnt_writers+0x0/0x95
> initcall init_mnt_writers+0x0/0x95 returned 0 after 0 msecs
> calling eventpoll_init+0x0/0x9a
> initcall eventpoll_init+0x0/0x9a returned 0 after 0 msecs
> calling anon_inode_init+0x0/0x11c
> initcall anon_inode_init+0x0/0x11c returned 0 after 0 msecs
> calling acpi_rtc_init+0x0/0xf9
> ACPI: RTC can wake from S4
> initcall acpi_rtc_init+0x0/0xf9 returned 0 after 0 msecs
> calling acpi_event_init+0x0/0x85
> initcall acpi_event_init+0x0/0x85 returned 0 after 2 msecs
> calling pnp_system_init+0x0/0x17
> system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
> system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
> system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
> system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
> system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
> system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
> system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
> system 00:07: ioport range 0x680-0x6ef has been reserved
> system 00:07: ioport range 0x800-0x80f has been reserved
> system 00:07: ioport range 0x810-0x817 has been reserved
> system 00:07: ioport range 0x400-0x47f has been reserved
> system 00:07: ioport range 0x500-0x53f has been reserved
> system 00:07: ioport range 0x1640-0x164f has been reserved
> initcall pnp_system_init+0x0/0x17 returned 0 after 2 msecs
> calling chr_dev_init+0x0/0x9d
> initcall chr_dev_init+0x0/0x9d returned 0 after 2 msecs
> calling firmware_class_init+0x0/0x77
> initcall firmware_class_init+0x0/0x77 returned 0 after 0 msecs
> calling loopback_init+0x0/0x17
> initcall loopback_init+0x0/0x17 returned 0 after 1 msecs
> calling init_pcmcia_bus+0x0/0x89
> initcall init_pcmcia_bus+0x0/0x89 returned 0 after 0 msecs
> calling cpufreq_gov_performance_init+0x0/0x17
> initcall cpufreq_gov_performance_init+0x0/0x17 returned 0 after 0 msecs
> calling cpufreq_gov_userspace_init+0x0/0x17
> initcall cpufreq_gov_userspace_init+0x0/0x17 returned 0 after 0 msecs
> calling init_acpi_pm_clocksource+0x0/0xae
> initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs
> calling pcibios_assign_resources+0x0/0x8d
> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> pci 0000:00:01.0: IO window: 0x3000-0x3fff
> pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
> pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
> pci 0000:00:1c.0: IO window: 0x2000-0x2fff
> pci 0000:00:1c.0: MEM window: 0xd8200000-0xd82fffff
> pci 0000:00:1c.0: PREFETCH window: 0x000000d8500000-0x000000d85fffff
> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
> pci 0000:00:1c.1: IO window: disabled
> pci 0000:00:1c.1: MEM window: 0xd8100000-0xd81fffff
> pci 0000:00:1c.1: PREFETCH window: disabled
> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 0
> pci 0000:00:1c.2: IO window: 0x1000-0x1fff
> pci 0000:00:1c.2: MEM window: 0xd4100000-0xd80fffff
> pci 0000:00:1c.2: PREFETCH window: 0x000000d0000000-0x000000d3ffffff
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
> pci 0000:00:1e.0: IO window: disabled
> pci 0000:00:1e.0: MEM window: 0xd4000000-0xd40fffff
> pci 0000:00:1e.0: PREFETCH window: disabled
> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1c.2 to 64
> pci 0000:00:1e.0: power state changed by ACPI to D0
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> bus: 00 index 0 io port: [0, ffff]
> bus: 00 index 1 mmio: [0, ffffffffffffffff]
> bus: 01 index 0 io port: [3000, 3fff]
> bus: 01 index 1 mmio: [d8300000, d83fffff]
> bus: 01 index 2 mmio: [c0000000, cfffffff]
> bus: 01 index 3 mmio: [0, 0]
> bus: 02 index 0 io port: [2000, 2fff]
> bus: 02 index 1 mmio: [d8200000, d82fffff]
> bus: 02 index 2 mmio: [d8500000, d85fffff]
> bus: 02 index 3 mmio: [0, 0]
> bus: 03 index 0 mmio: [0, 0]
> bus: 03 index 1 mmio: [d8100000, d81fffff]
> bus: 03 index 2 mmio: [0, 0]
> bus: 03 index 3 mmio: [0, 0]
> bus: 04 index 0 io port: [1000, 1fff]
> bus: 04 index 1 mmio: [d4100000, d80fffff]
> bus: 04 index 2 mmio: [d0000000, d3ffffff]
> bus: 04 index 3 mmio: [0, 0]
> bus: 0c index 0 mmio: [0, 0]
> bus: 0c index 1 mmio: [d4000000, d40fffff]
> bus: 0c index 2 mmio: [0, 0]
> bus: 0c index 3 io port: [0, ffff]
> bus: 0c index 4 mmio: [0, ffffffffffffffff]
> initcall pcibios_assign_resources+0x0/0x8d returned 0 after 10 msecs
> calling inet_init+0x0/0x354
> NET: Registered protocol family 2
> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
> TCP: Hash tables configured (established 524288 bind 65536)
> TCP reno registered
> initcall inet_init+0x0/0x354 returned 0 after 39 msecs
> calling af_unix_init+0x0/0x5a
> NET: Registered protocol family 1
> initcall af_unix_init+0x0/0x5a returned 0 after 0 msecs
> calling populate_rootfs+0x0/0xf3
> checking if image is initramfs... it is
> debug: unmapping init memory ffff880037d35000..ffff880037ff0000
> initcall populate_rootfs+0x0/0xf3 returned 0 after 262 msecs
> calling calgary_fixup_tce_spaces+0x0/0xfe
> initcall calgary_fixup_tce_spaces+0x0/0xfe returned -19 after 0 msecs
> calling i8259A_init_sysfs+0x0/0x27
> initcall i8259A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
> calling vsyscall_init+0x0/0x71
> initcall vsyscall_init+0x0/0x71 returned 0 after 0 msecs
> calling sbf_init+0x0/0xf4
> initcall sbf_init+0x0/0xf4 returned 0 after 0 msecs
> calling i8237A_init_sysfs+0x0/0x27
> initcall i8237A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
> calling add_rtc_cmos+0x0/0x1d
> initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs
> calling cache_sysfs_init+0x0/0x62
> initcall cache_sysfs_init+0x0/0x62 returned 0 after 2 msecs
> calling mce_init_device+0x0/0x8a
> initcall mce_init_device+0x0/0x8a returned 0 after 1 msecs
> calling periodic_mcheck_init+0x0/0x44
> initcall periodic_mcheck_init+0x0/0x44 returned 0 after 0 msecs
> calling thermal_throttle_init_device+0x0/0x92
> initcall thermal_throttle_init_device+0x0/0x92 returned 0 after 0 msecs
> calling threshold_init_device+0x0/0x4e
> initcall threshold_init_device+0x0/0x4e returned 0 after 0 msecs
> calling msr_init+0x0/0x124
> initcall msr_init+0x0/0x124 returned 0 after 0 msecs
> calling cpuid_init+0x0/0x124
> initcall cpuid_init+0x0/0x124 returned 0 after 0 msecs
> calling init_lapic_sysfs+0x0/0x32
> initcall init_lapic_sysfs+0x0/0x32 returned 0 after 0 msecs
> calling ioapic_init_sysfs+0x0/0xac
> initcall ioapic_init_sysfs+0x0/0xac returned 0 after 0 msecs
> calling add_pcspkr+0x0/0x45
> initcall add_pcspkr+0x0/0x45 returned 0 after 0 msecs
> calling uv_ptc_init+0x0/0x7a
> initcall uv_ptc_init+0x0/0x7a returned 0 after 0 msecs
> calling uv_bau_init+0x0/0x604
> initcall uv_bau_init+0x0/0x604 returned 0 after 0 msecs
> calling audit_classes_init+0x0/0xb4
> initcall audit_classes_init+0x0/0xb4 returned 0 after 0 msecs
> calling debug_pagealloc_proc_init+0x0/0x30
> initcall debug_pagealloc_proc_init+0x0/0x30 returned 0 after 0 msecs
> calling pt_dump_init+0x0/0x30
> initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs
> calling init_vdso_vars+0x0/0x219
> initcall init_vdso_vars+0x0/0x219 returned 0 after 0 msecs
> calling ia32_binfmt_init+0x0/0x19
> initcall ia32_binfmt_init+0x0/0x19 returned 0 after 0 msecs
> calling sysenter_setup+0x0/0x2ad
> initcall sysenter_setup+0x0/0x2ad returned 0 after 0 msecs
> calling init_sched_debug_procfs+0x0/0x2c
> initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs
> calling create_proc_profile+0x0/0x2cf
> initcall create_proc_profile+0x0/0x2cf returned 0 after 0 msecs
> calling ioresources_init+0x0/0x41
> initcall ioresources_init+0x0/0x41 returned 0 after 0 msecs
> calling uid_cache_init+0x0/0x92
> initcall uid_cache_init+0x0/0x92 returned 0 after 0 msecs
> calling init_posix_timers+0x0/0xa0
> initcall init_posix_timers+0x0/0xa0 returned 0 after 0 msecs
> calling init_posix_cpu_timers+0x0/0xb5
> initcall init_posix_cpu_timers+0x0/0xb5 returned 0 after 0 msecs
> calling nsproxy_cache_init+0x0/0x32
> initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 msecs
> calling timekeeping_init_device+0x0/0x27
> initcall timekeeping_init_device+0x0/0x27 returned 0 after 0 msecs
> calling init_clocksource_sysfs+0x0/0x55
> initcall init_clocksource_sysfs+0x0/0x55 returned 0 after 0 msecs
> calling init_timer_list_procfs+0x0/0x31
> initcall init_timer_list_procfs+0x0/0x31 returned 0 after 0 msecs
> calling init_tstats_procfs+0x0/0x31
> initcall init_tstats_procfs+0x0/0x31 returned 0 after 0 msecs
> calling lockdep_proc_init+0x0/0x7c
> initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 msecs
> calling futex_init+0x0/0xcc
> initcall futex_init+0x0/0xcc returned 0 after 0 msecs
> calling proc_dma_init+0x0/0x27
> initcall proc_dma_init+0x0/0x27 returned 0 after 0 msecs
> calling percpu_modinit+0x0/0x79
> initcall percpu_modinit+0x0/0x79 returned 0 after 0 msecs
> calling kallsyms_init+0x0/0x2a
> initcall kallsyms_init+0x0/0x2a returned 0 after 0 msecs
> calling snapshot_device_init+0x0/0x17
> initcall snapshot_device_init+0x0/0x17 returned 0 after 0 msecs
> calling crash_save_vmcoreinfo_init+0x0/0x430
> initcall crash_save_vmcoreinfo_init+0x0/0x430 returned 0 after 0 msecs
> calling crash_notes_memory_init+0x0/0x44
> initcall crash_notes_memory_init+0x0/0x44 returned 0 after 0 msecs
> calling pid_namespaces_init+0x0/0x32
> initcall pid_namespaces_init+0x0/0x32 returned 0 after 0 msecs
> calling audit_init+0x0/0x172
> audit: initializing netlink socket (disabled)
> type=2000 audit(1216436777.860:1): initialized
> initcall audit_init+0x0/0x172 returned 0 after 0 msecs
> calling audit_tree_init+0x0/0x4e
> initcall audit_tree_init+0x0/0x4e returned 0 after 0 msecs
> calling init_kprobes+0x0/0x124
> initcall init_kprobes+0x0/0x124 returned 0 after 4 msecs
> calling relay_init+0x0/0x19
> initcall relay_init+0x0/0x19 returned 0 after 0 msecs
> calling utsname_sysctl_init+0x0/0x19
> initcall utsname_sysctl_init+0x0/0x19 returned 0 after 0 msecs
> calling init_lstats_procfs+0x0/0x2a
> initcall init_lstats_procfs+0x0/0x2a returned 0 after 0 msecs
> calling init_sched_switch_trace+0x0/0x41
> initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs
> calling init_stack_trace+0x0/0x12
> initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs
> calling init_function_trace+0x0/0x12
> initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs
> calling init_irqsoff_tracer+0x0/0x14
> initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 msecs
> calling init_wakeup_tracer+0x0/0x12
> initcall init_wakeup_tracer+0x0/0x12 returned 0 after 0 msecs
> calling init_per_zone_pages_min+0x0/0x46
> initcall init_per_zone_pages_min+0x0/0x46 returned 0 after 0 msecs
> calling pdflush_init+0x0/0x17
> initcall pdflush_init+0x0/0x17 returned 0 after 0 msecs
> calling kswapd_init+0x0/0x7d
> initcall kswapd_init+0x0/0x7d returned 0 after 0 msecs
> calling setup_vmstat+0x0/0x4f
> initcall setup_vmstat+0x0/0x4f returned 0 after 0 msecs
> calling procswaps_init+0x0/0x27
> initcall procswaps_init+0x0/0x27 returned 0 after 0 msecs
> calling hugetlb_init+0x0/0xa0
> Total HugeTLB memory allocated, 0
> initcall hugetlb_init+0x0/0xa0 returned 0 after 0 msecs
> calling init_tmpfs+0x0/0xdf
> initcall init_tmpfs+0x0/0xdf returned 0 after 0 msecs
> calling slab_sysfs_init+0x0/0xf5
> initcall slab_sysfs_init+0x0/0xf5 returned 0 after 30 msecs
> calling fasync_init+0x0/0x2f
> initcall fasync_init+0x0/0x2f returned 0 after 0 msecs
> calling aio_setup+0x0/0x78
> initcall aio_setup+0x0/0x78 returned 0 after 0 msecs
> calling inotify_setup+0x0/0x17
> initcall inotify_setup+0x0/0x17 returned 0 after 0 msecs
> calling inotify_user_setup+0x0/0xbd
> initcall inotify_user_setup+0x0/0xbd returned 0 after 0 msecs
> calling init_sys32_ioctl+0x0/0x8a
> initcall init_sys32_ioctl+0x0/0x8a returned 0 after 0 msecs
> calling dquot_init+0x0/0x108
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> initcall dquot_init+0x0/0x108 returned 0 after 0 msecs
> calling init_v2_quota_format+0x0/0x17
> initcall init_v2_quota_format+0x0/0x17 returned 0 after 0 msecs
> calling dnotify_init+0x0/0x2f
> initcall dnotify_init+0x0/0x2f returned 0 after 0 msecs
> calling vmcore_init+0x0/0x860
> initcall vmcore_init+0x0/0x860 returned 0 after 0 msecs
> calling init_devpts_fs+0x0/0x44
> initcall init_devpts_fs+0x0/0x44 returned 0 after 0 msecs
> calling init_ramfs_fs+0x0/0x17
> initcall init_ramfs_fs+0x0/0x17 returned 0 after 0 msecs
> calling init_hugetlbfs_fs+0x0/0x9d
> initcall init_hugetlbfs_fs+0x0/0x9d returned 0 after 0 msecs
> calling init_iso9660_fs+0x0/0x76
> initcall init_iso9660_fs+0x0/0x76 returned 0 after 0 msecs
> calling init_nls_cp437+0x0/0x17
> initcall init_nls_cp437+0x0/0x17 returned 0 after 0 msecs
> calling init_nls_ascii+0x0/0x17
> initcall init_nls_ascii+0x0/0x17 returned 0 after 0 msecs
> calling ipc_init+0x0/0x28
> msgmni has been set to 5936
> initcall ipc_init+0x0/0x28 returned 0 after 0 msecs
> calling ipc_sysctl_init+0x0/0x19
> initcall ipc_sysctl_init+0x0/0x19 returned 0 after 0 msecs
> calling init_mqueue_fs+0x0/0xdb
> initcall init_mqueue_fs+0x0/0xdb returned 0 after 0 msecs
> calling key_proc_init+0x0/0x5e
> initcall key_proc_init+0x0/0x5e returned 0 after 0 msecs
> calling selinux_nf_ip_init+0x0/0x7f
> SELinux: Registering netfilter hooks
> initcall selinux_nf_ip_init+0x0/0x7f returned 0 after 0 msecs
> calling init_sel_fs+0x0/0x6d
> initcall init_sel_fs+0x0/0x6d returned 0 after 1 msecs
> calling selnl_init+0x0/0x52
> initcall selnl_init+0x0/0x52 returned 0 after 0 msecs
> calling sel_netif_init+0x0/0x6b
> initcall sel_netif_init+0x0/0x6b returned 0 after 0 msecs
> calling sel_netnode_init+0x0/0x78
> initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs
> calling sel_netport_init+0x0/0x78
> initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs
> calling aurule_init+0x0/0x3c
> initcall aurule_init+0x0/0x3c returned 0 after 0 msecs
> calling crypto_algapi_init+0x0/0x12
> initcall crypto_algapi_init+0x0/0x12 returned 0 after 0 msecs
> calling cryptomgr_init+0x0/0x17
> initcall cryptomgr_init+0x0/0x17 returned 0 after 0 msecs
> calling hmac_module_init+0x0/0x17
> initcall hmac_module_init+0x0/0x17 returned 0 after 0 msecs
> calling md5_mod_init+0x0/0x17
> initcall md5_mod_init+0x0/0x17 returned 0 after 0 msecs
> calling sha1_generic_mod_init+0x0/0x17
> initcall sha1_generic_mod_init+0x0/0x17 returned 0 after 0 msecs
> calling bsg_init+0x0/0x128
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> initcall bsg_init+0x0/0x128 returned 0 after 0 msecs
> calling noop_init+0x0/0x19
> io scheduler noop registered
> initcall noop_init+0x0/0x19 returned 0 after 0 msecs
> calling as_init+0x0/0x19
> io scheduler anticipatory registered
> initcall as_init+0x0/0x19 returned 0 after 0 msecs
> calling deadline_init+0x0/0x19
> io scheduler deadline registered
> initcall deadline_init+0x0/0x19 returned 0 after 0 msecs
> calling cfq_init+0x0/0x99
> io scheduler cfq registered (default)
> initcall cfq_init+0x0/0x99 returned 0 after 0 msecs
> calling debug_objects_init_debugfs+0x0/0x64
> initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 0 msecs
> calling percpu_counter_startup+0x0/0x14
> initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs
> calling pci_init+0x0/0x3a
> pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
> pci 0000:00:1d.0: Performing full reset
> pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
> pci 0000:00:1d.1: Performing full reset
> pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
> pci 0000:00:1d.2: Performing full reset
> pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
> pci 0000:00:1d.3: Performing full reset
> pci 0000:01:00.0: Boot video device
> initcall pci_init+0x0/0x3a returned 0 after 1 msecs
> calling pci_proc_init+0x0/0x70
> initcall pci_proc_init+0x0/0x70 returned 0 after 0 msecs
> calling pcie_portdrv_init+0x0/0x52
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> pcieport-driver 0000:00:01.0: found MSI capability
> pci_express 0000:00:01.0:pcie00: allocate port service
> pci_express 0000:00:01.0:pcie03: allocate port service
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> pcieport-driver 0000:00:1c.0: found MSI capability
> pci_express 0000:00:1c.0:pcie00: allocate port service
> pci_express 0000:00:1c.0:pcie02: allocate port service
> pci_express 0000:00:1c.0:pcie03: allocate port service
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> pcieport-driver 0000:00:1c.1: found MSI capability
> pci_express 0000:00:1c.1:pcie00: allocate port service
> pci_express 0000:00:1c.1:pcie02: allocate port service
> pci_express 0000:00:1c.1:pcie03: allocate port service
> PCI: Setting latency timer of device 0000:00:1c.2 to 64
> pcieport-driver 0000:00:1c.2: found MSI capability
> pci_express 0000:00:1c.2:pcie00: allocate port service
> pci_express 0000:00:1c.2:pcie02: allocate port service
> pci_express 0000:00:1c.2:pcie03: allocate port service
> initcall pcie_portdrv_init+0x0/0x52 returned 0 after 7 msecs
> calling aer_service_init+0x0/0x25
> initcall aer_service_init+0x0/0x25 returned 0 after 0 msecs
> calling pci_hotplug_init+0x0/0x22
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> initcall pci_hotplug_init+0x0/0x22 returned 0 after 0 msecs
> calling fb_console_init+0x0/0x12b
> initcall fb_console_init+0x0/0x12b returned 0 after 0 msecs
> calling vesafb_init+0x0/0x23f
> initcall vesafb_init+0x0/0x23f returned 0 after 0 msecs
> calling efifb_init+0x0/0x1f2
> initcall efifb_init+0x0/0x1f2 returned -19 after 0 msecs
> calling acpi_reserve_resources+0x0/0xf0
> initcall acpi_reserve_resources+0x0/0xf0 returned 0 after 0 msecs
> calling acpi_button_init+0x0/0x63
> input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button (FF) [PWRF]
> input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
> ACPI: Lid Switch [LID0]
> input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
> ACPI: Power Button (CM) [PWRB]
> input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
> ACPI: Sleep Button (CM) [SLPB]
> initcall acpi_button_init+0x0/0x63 returned 0 after 4 msecs
> calling acpi_fan_init+0x0/0x63
> initcall acpi_fan_init+0x0/0x63 returned 0 after 0 msecs
> calling irqrouter_init_sysfs+0x0/0x3d
> initcall irqrouter_init_sysfs+0x0/0x3d returned 0 after 0 msecs
> calling acpi_processor_init+0x0/0x10f
> ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
> ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
> Monitor-Mwait will be used to enter C-1 state
> Monitor-Mwait will be used to enter C-2 state
> Monitor-Mwait will be used to enter C-3 state
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: ACPI0007:00 is registered as cooling_device0
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
> ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: ACPI0007:01 is registered as cooling_device1
> ACPI: Processor [CPU1] (supports 8 throttling states)
> initcall acpi_processor_init+0x0/0x10f returned 0 after 22 msecs
> calling acpi_container_init+0x0/0x47
> initcall acpi_container_init+0x0/0x47 returned 0 after 17 msecs
> calling acpi_thermal_init+0x0/0x88
> initcall acpi_thermal_init+0x0/0x88 returned 0 after 0 msecs
> calling rand_initialize+0x0/0x31
> initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs
> calling tty_init+0x0/0x1ca
> initcall tty_init+0x0/0x1ca returned 0 after 29 msecs
> calling pty_init+0x0/0x278
> initcall pty_init+0x0/0x278 returned 0 after 0 msecs
> calling hpet_init+0x0/0x6f
> hpet_resources: 0xfed00000 is busy
> initcall hpet_init+0x0/0x6f returned 0 after 1 msecs
> calling nvram_init+0x0/0x8f
> Non-volatile memory driver v1.2
> initcall nvram_init+0x0/0x8f returned 0 after 0 msecs
> calling agp_init+0x0/0x2b
> Linux agpgart interface v0.103
> initcall agp_init+0x0/0x2b returned 0 after 0 msecs
> calling agp_intel_init+0x0/0x2e
> initcall agp_intel_init+0x0/0x2e returned 0 after 0 msecs
> calling agp_sis_init+0x0/0x2e
> initcall agp_sis_init+0x0/0x2e returned 0 after 0 msecs
> calling agp_via_init+0x0/0x2e
> initcall agp_via_init+0x0/0x2e returned 0 after 0 msecs
> calling cn_proc_init+0x0/0x42
> initcall cn_proc_init+0x0/0x42 returned 0 after 0 msecs
> calling serial8250_init+0x0/0x148
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> initcall serial8250_init+0x0/0x148 returned 0 after 2 msecs
> calling serial8250_pnp_init+0x0/0x17
> initcall serial8250_pnp_init+0x0/0x17 returned 0 after 0 msecs
> calling serial8250_pci_init+0x0/0x20
> initcall serial8250_pci_init+0x0/0x20 returned 0 after 0 msecs
> calling init_kgdboc+0x0/0x1b
> initcall init_kgdboc+0x0/0x1b returned 0 after 0 msecs
> calling topology_sysfs_init+0x0/0x5e
> initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 msecs
> calling brd_init+0x0/0x172
> brd: module loaded
> initcall brd_init+0x0/0x172 returned 0 after 11 msecs
> calling init_kgdbts+0x0/0x1b
> initcall init_kgdbts+0x0/0x1b returned 0 after 0 msecs
> calling net_olddevs_init+0x0/0xa3
> initcall net_olddevs_init+0x0/0xa3 returned 0 after 0 msecs
> calling mac_hid_init+0x0/0xd7
> input: Macintosh mouse button emulation as /devices/virtual/input/input4
> initcall mac_hid_init+0x0/0xd7 returned 0 after 0 msecs
> calling init_sd+0x0/0xfd
> Driver 'sd' needs updating - please use bus_type methods
> initcall init_sd+0x0/0xfd returned 0 after 0 msecs
> calling init_sg+0x0/0x145
> initcall init_sg+0x0/0x145 returned 0 after 0 msecs
> calling nonstatic_sysfs_init+0x0/0x17
> initcall nonstatic_sysfs_init+0x0/0x17 returned 0 after 0 msecs
> calling yenta_socket_init+0x0/0x20
> initcall yenta_socket_init+0x0/0x20 returned 0 after 0 msecs
> calling mon_init+0x0/0x11c
> initcall mon_init+0x0/0x11c returned 0 after 0 msecs
> calling i8042_init+0x0/0x371
> PNP: No PS/2 controller found. Probing ports directly.
> i8042.c: No controller found.
> initcall i8042_init+0x0/0x371 returned -19 after 2 msecs
> calling serport_init+0x0/0x39
> initcall serport_init+0x0/0x39 returned 0 after 0 msecs
> calling mousedev_init+0x0/0x67
> mice: PS/2 mouse device common for all mice
> initcall mousedev_init+0x0/0x67 returned 0 after 4 msecs
> calling evdev_init+0x0/0x17
> initcall evdev_init+0x0/0x17 returned 0 after 21 msecs
> calling atkbd_init+0x0/0x2c
> initcall atkbd_init+0x0/0x2c returned 0 after 0 msecs
> calling psmouse_init+0x0/0x78
> initcall psmouse_init+0x0/0x78 returned 0 after 0 msecs
> calling cmos_init+0x0/0x35
> rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month, y3k
> initcall cmos_init+0x0/0x35 returned 0 after 1 msecs
> calling init_ladder+0x0/0x17
> cpuidle: using governor ladder
> initcall init_ladder+0x0/0x17 returned 0 after 2 msecs
> calling init_menu+0x0/0x17
> cpuidle: using governor menu
> initcall init_menu+0x0/0x17 returned 0 after 4 msecs
> calling efivars_init+0x0/0x1f5
> initcall efivars_init+0x0/0x1f5 returned -19 after 0 msecs
> calling hid_init+0x0/0x10
> initcall hid_init+0x0/0x10 returned 0 after 0 msecs
> calling hid_init+0x0/0x67
> Marking TSC unstable due to TSC halts in idle
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> usbhid: v2.6:USB HID core driver
> initcall hid_init+0x0/0x67 returned 0 after 1 msecs
> calling sysctl_core_init+0x0/0x17
> initcall sysctl_core_init+0x0/0x17 returned 0 after 0 msecs
> calling flow_cache_init+0x0/0x1ca
> initcall flow_cache_init+0x0/0x1ca returned 0 after 0 msecs
> calling llc_init+0x0/0x25
> initcall llc_init+0x0/0x25 returned 0 after 0 msecs
> calling snap_init+0x0/0x36
> initcall snap_init+0x0/0x36 returned 0 after 0 msecs
> calling rif_init+0x0/0x9a
> initcall rif_init+0x0/0x9a returned 0 after 0 msecs
> calling blackhole_module_init+0x0/0x17
> initcall blackhole_module_init+0x0/0x17 returned 0 after 0 msecs
> calling sysctl_ipv4_init+0x0/0x53
> initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 1 msecs
> calling init_syncookies+0x0/0x1e
> initcall init_syncookies+0x0/0x1e returned 0 after 0 msecs
> calling ipv4_netfilter_init+0x0/0x17
> initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs
> calling cubictcp_register+0x0/0x6a
> TCP cubic registered
> initcall cubictcp_register+0x0/0x6a returned 0 after 0 msecs
> calling xfrm_user_init+0x0/0x5e
> Initializing XFRM netlink socket
> initcall xfrm_user_init+0x0/0x5e returned 0 after 0 msecs
> calling packet_init+0x0/0x4c
> NET: Registered protocol family 17
> initcall packet_init+0x0/0x4c returned 0 after 0 msecs
> calling hpet_insert_resource+0x0/0x28
> initcall hpet_insert_resource+0x0/0x28 returned 0 after 0 msecs
> calling update_mp_table+0x0/0x61b
> initcall update_mp_table+0x0/0x61b returned 0 after 0 msecs
> calling lapic_insert_resource+0x0/0x45
> initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 msecs
> calling init_lapic_nmi_sysfs+0x0/0x3d
> initcall init_lapic_nmi_sysfs+0x0/0x3d returned 0 after 0 msecs
> calling ioapic_insert_resources+0x0/0x54
> initcall ioapic_insert_resources+0x0/0x54 returned 0 after 0 msecs
> calling check_early_ioremap_leak+0x0/0x49
> initcall check_early_ioremap_leak+0x0/0x49 returned 0 after 0 msecs
> calling sched_init_debug+0x0/0x24
> initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs
> calling init_oops_id+0x0/0x28
> initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs
> calling disable_boot_consoles+0x0/0x3f
> initcall disable_boot_consoles+0x0/0x3f returned 0 after 0 msecs
> calling pm_qos_power_init+0x0/0xcf
> initcall pm_qos_power_init+0x0/0xcf returned 0 after 0 msecs
> calling software_resume+0x0/0x1ba
> initcall software_resume+0x0/0x1ba returned -2 after 0 msecs
> initcall software_resume+0x0/0x1ba returned with error code -2
> calling debugfs_kprobe_init+0x0/0x8e
> initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 0 msecs
> calling taskstats_init+0x0/0x9a
> registered taskstats version 1
> initcall taskstats_init+0x0/0x9a returned 0 after 0 msecs
> calling fail_page_alloc_debugfs+0x0/0xe9
> initcall fail_page_alloc_debugfs+0x0/0xe9 returned 0 after 0 msecs
> calling fail_make_request_debugfs+0x0/0x1e
> initcall fail_make_request_debugfs+0x0/0x1e returned 0 after 0 msecs
> calling random32_reseed+0x0/0x7e
> initcall random32_reseed+0x0/0x7e returned 0 after 0 msecs
> calling pci_sysfs_init+0x0/0x51
> initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 msecs
> calling acpi_wakeup_device_init+0x0/0xb6
> initcall acpi_wakeup_device_init+0x0/0xb6 returned 0 after 0 msecs
> calling acpi_sleep_proc_init+0x0/0x5a
> initcall acpi_sleep_proc_init+0x0/0x5a returned 0 after 0 msecs
> calling seqgen_init+0x0/0x14
> initcall seqgen_init+0x0/0x14 returned 0 after 0 msecs
> calling late_resume_init+0x0/0x112
> Magic number: 0:812:108
> initcall late_resume_init+0x0/0x112 returned 0 after 0 msecs
> calling scsi_complete_async_scans+0x0/0xf4
> initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 0 msecs
> calling memmap_init+0x0/0x9d
> initcall memmap_init+0x0/0x9d returned 0 after 0 msecs
> calling pci_mmcfg_late_insert_resources+0x0/0x48
> initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned 0 after 0 msecs
> calling tcp_congestion_default+0x0/0x17
> initcall tcp_congestion_default+0x0/0x17 returned 0 after 0 msecs
> debug: unmapping init memory ffffffff814eb000..ffffffff8166d000
> Write protecting the kernel read-only data: 1368k
> ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> drivers/usb/core/inode.c: creating file 'devices'
> drivers/usb/core/inode.c: creating file '001'
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
> ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
> ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
> ehci_hcd 0000:00:1d.7: debug port 1
> ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> ehci_hcd 0000:00:1d.7: supports USB remote wakeup
> ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400
> ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
> ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: default language 0x0409
> usb usb1: uevent
> usb usb1: usb_probe_device
> usb usb1: configuration #1 chosen from 1 choice
> usb usb1: adding 1-0:1.0 (config #1, interface 0)
> usb 1-0:1.0: uevent
> hub 1-0:1.0: usb_probe_interface
> hub 1-0:1.0: usb_probe_interface - got id
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> hub 1-0:1.0: standalone hub
> hub 1-0:1.0: no power switching (usb 1.0)
> hub 1-0:1.0: individual port over-current protection
> hub 1-0:1.0: power on to power good time: 20ms
> hub 1-0:1.0: local power source is good
> hub 1-0:1.0: trying to enable port power on non-switchable hub
> Clocksource tsc unstable (delta = -305979950 ns)
> hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
> drivers/usb/core/inode.c: creating file '001'
> ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 ehci_hcd
> usb usb1: SerialNumber: 0000:00:1d.7
> hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
> modprobe used greatest stack depth: 3792 bytes left
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ohci_hcd: block sizes: ed 80 td 96
> USB Universal Host Controller Interface driver v3.0
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> drivers/usb/core/inode.c: creating file '002'
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.0: detected 2 ports
> uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
> uhci_hcd 0000:00:1d.0: Performing full reset
> uhci_hcd 0000:00:1d.0: supports USB remote wakeup
> uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
> usb usb2: default language 0x0409
> usb usb2: uevent
> usb usb2: usb_probe_device
> usb usb2: configuration #1 chosen from 1 choice
> usb usb2: adding 2-0:1.0 (config #1, interface 0)
> usb 2-0:1.0: uevent
> hub 2-0:1.0: usb_probe_interface
> hub 2-0:1.0: usb_probe_interface - got id
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> hub 2-0:1.0: standalone hub
> hub 2-0:1.0: no power switching (usb 1.0)
> hub 2-0:1.0: individual port over-current protection
> hub 2-0:1.0: power on to power good time: 2ms
> hub 2-0:1.0: local power source is good
> hub 2-0:1.0: trying to enable port power on non-switchable hub
> hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
> drivers/usb/core/inode.c: creating file '001'
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: UHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
> usb usb2: SerialNumber: 0000:00:1d.0
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> drivers/usb/core/inode.c: creating file '003'
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.1: detected 2 ports
> uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
> uhci_hcd 0000:00:1d.1: Performing full reset
> uhci_hcd 0000:00:1d.1: supports USB remote wakeup
> uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
> usb usb3: default language 0x0409
> usb usb3: uevent
> usb usb3: usb_probe_device
> usb usb3: configuration #1 chosen from 1 choice
> usb usb3: adding 3-0:1.0 (config #1, interface 0)
> usb 3-0:1.0: uevent
> hub 3-0:1.0: usb_probe_interface
> hub 3-0:1.0: usb_probe_interface - got id
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> hub 3-0:1.0: standalone hub
> hub 3-0:1.0: no power switching (usb 1.0)
> hub 3-0:1.0: individual port over-current protection
> hub 3-0:1.0: power on to power good time: 2ms
> hub 3-0:1.0: local power source is good
> hub 3-0:1.0: trying to enable port power on non-switchable hub
> ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
> ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 2 not reset yet, waiting 50ms
> ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
> ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
> drivers/usb/core/inode.c: creating file '001'
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
> usb usb3: SerialNumber: 0000:00:1d.1
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> drivers/usb/core/inode.c: creating file '004'
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.2: detected 2 ports
> uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
> uhci_hcd 0000:00:1d.2: Performing full reset
> uhci_hcd 0000:00:1d.2: supports USB remote wakeup
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
> usb usb4: default language 0x0409
> usb usb4: uevent
> usb usb4: usb_probe_device
> usb usb4: configuration #1 chosen from 1 choice
> usb usb4: adding 4-0:1.0 (config #1, interface 0)
> usb 4-0:1.0: uevent
> hub 4-0:1.0: usb_probe_interface
> hub 4-0:1.0: usb_probe_interface - got id
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> hub 4-0:1.0: standalone hub
> hub 4-0:1.0: no power switching (usb 1.0)
> hub 4-0:1.0: individual port over-current protection
> hub 4-0:1.0: power on to power good time: 2ms
> hub 4-0:1.0: local power source is good
> hub 4-0:1.0: trying to enable port power on non-switchable hub
> hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
> drivers/usb/core/inode.c: creating file '001'
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
> usb usb4: SerialNumber: 0000:00:1d.2
> uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> drivers/usb/core/inode.c: creating file '005'
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: detected 2 ports
> uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
> uhci_hcd 0000:00:1d.3: Performing full reset
> uhci_hcd 0000:00:1d.3: supports USB remote wakeup
> uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
> usb usb5: default language 0x0409
> usb usb5: uevent
> usb usb5: usb_probe_device
> usb usb5: configuration #1 chosen from 1 choice
> usb usb5: adding 5-0:1.0 (config #1, interface 0)
> usb 5-0:1.0: uevent
> hub 5-0:1.0: usb_probe_interface
> hub 5-0:1.0: usb_probe_interface - got id
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> hub 5-0:1.0: standalone hub
> hub 5-0:1.0: no power switching (usb 1.0)
> hub 5-0:1.0: individual port over-current protection
> hub 5-0:1.0: power on to power good time: 2ms
> hub 5-0:1.0: local power source is good
> hub 5-0:1.0: trying to enable port power on non-switchable hub
> ehci_hcd 0000:00:1d.7: port 4 high speed
> ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
> usb 1-4: new high speed USB device using ehci_hcd and address 3
> drivers/usb/core/inode.c: creating file '001'
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: UHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
> usb usb5: SerialNumber: 0000:00:1d.3
> modprobe used greatest stack depth: 3744 bytes left
> ata_piix 0000:00:1f.1: version 2.12
> ata_piix 0000:00:1f.1: power state changed by ACPI to D0
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1f.1 to 64
> ehci_hcd 0000:00:1d.7: port 4 high speed
> ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
> scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
> ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
> usb 1-4: uevent
> usb 1-4: usb_probe_device
> usb 1-4: configuration #1 chosen from 1 choice
> usb 1-4: adding 1-4:1.0 (config #1, interface 0)
> usb 1-4:1.0: uevent
> drivers/usb/core/inode.c: creating file '003'
> usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
> usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
> ata1.00: ATAPI: MATSHITADVD-R UJ-85J, FAV1, max UDMA/66
> ata1.00: configured for UDMA/66
> hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
> ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 6 not reset yet, waiting 50ms
> ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
> ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
> isa bounce pool size: 16 pages
> scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5
> scsi 0:0:0:0: Attached scsi generic sg0 type 5
> ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
> hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
> ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 7 not reset yet, waiting 50ms
> ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
> hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
> uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
> hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> scsi2 : ata_piix
> scsi3 : ata_piix
> ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
> ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
> hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
> ata3.01: ATA-7: TOSHIBA MK2035GSS, DK021B, max UDMA/100
> ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/4)
> ata3.01: configured for UDMA/100
> usb 2-2: new full speed USB device using uhci_hcd and address 2
> usb 2-2: ep0 maxpacket = 8
> usb 2-2: USB quirks for this device: 2
> scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
> sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
> sd 2:0:1:0: [sda] Write Protect is off
> sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
> sd 2:0:1:0: [sda] Write Protect is off
> sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<7>usb 2-2: skipped 1 descriptor after interface
> usb 2-2: skipped 1 descriptor after interface
> usb 2-2: skipped 1 descriptor after interface
> usb 2-2: default language 0x0409
> usb 2-2: uevent
> usb 2-2: usb_probe_device
> usb 2-2: configuration #1 chosen from 1 choice
> usb 2-2: adding 2-2:1.0 (config #1, interface 0)
> usb 2-2:1.0: uevent
> usbhid 2-2:1.0: usb_probe_interface
> usbhid 2-2:1.0: usb_probe_interface - got id
> input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us
> input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> usb 2-2: adding 2-2:1.1 (config #1, interface 1)
> usb 2-2:1.1: uevent
> usbhid 2-2:1.1: usb_probe_interface
> usbhid 2-2:1.1: usb_probe_interface - got id
> usb 2-2: adding 2-2:1.2 (config #1, interface 2)
> usb 2-2:1.2: uevent
> usbhid 2-2:1.2: usb_probe_interface
> usbhid 2-2:1.2: usb_probe_interface - got id
> input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us
> sda1 sda2 sda3 sda4 sda5
> input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
> sd 2:0:1:0: [sda] Attached SCSI disk
> sd 2:0:1:0: Attached scsi generic sg1 type 0
> modprobe used greatest stack depth: 2304 bytes left
> drivers/usb/core/inode.c: creating file '002'
> usb 2-2: New USB device found, idVendor=05ac, idProduct=021a
> usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-2: Product: Apple Internal Keyboard / Trackpad
> usb 2-2: Manufacturer: Apple Computer
> hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
> hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
> uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
> hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
> hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
> hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
> uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00
> hub 4-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
> hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
> usb 4-2: new full speed USB device using uhci_hcd and address 2
> usb 4-2: ep0 maxpacket = 8
> usb 4-2: skipped 1 descriptor after interface
> usb 4-2: default language 0x0409
> usb 4-2: uevent
> usb 4-2: usb_probe_device
> usb 4-2: configuration #1 chosen from 1 choice
> usb 4-2: adding 4-2:1.0 (config #1, interface 0)
> usb 4-2:1.0: uevent
> usbhid 4-2:1.0: usb_probe_interface
> usbhid 4-2:1.0: usb_probe_interface - got id
> drivers/usb/core/file.c: looking for a minor, starting at 96
> hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
> drivers/usb/core/inode.c: creating file '002'
> usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
> usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 4-2: Product: IR Receiver
> usb 4-2: Manufacturer: Apple Computer, Inc.
> hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
> uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
> hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
> hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
> usb 5-1: new full speed USB device using uhci_hcd and address 2
> usb 5-1: skipped 1 descriptor after interface
> usb 5-1: skipped 1 descriptor after interface
> usb 5-1: uevent
> usb 5-1: usb_probe_device
> usb 5-1: configuration #1 chosen from 1 choice
> usb 5-1: adding 5-1:1.0 (config #1, interface 0)
> usb 5-1:1.0: uevent
> usbhid 5-1:1.0: usb_probe_interface
> usbhid 5-1:1.0: usb_probe_interface - got id
> input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
> input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
> usb 5-1: adding 5-1:1.1 (config #1, interface 1)
> usb 5-1:1.1: uevent
> usbhid 5-1:1.1: usb_probe_interface
> usbhid 5-1:1.1: usb_probe_interface - got id
> input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8
> input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
> drivers/usb/core/inode.c: creating file '002'
> usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
> usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
> usb usb3: suspend_rh (auto-stop)
> hub 3-0:1.0: hub_suspend
> usb usb3: bus auto-suspend
> usb usb3: suspend_rh
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> type=1404 audit(1216436785.373:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
> SELinux: 8192 avtab hash slots, 171021 rules.
> SELinux: 8192 avtab hash slots, 171021 rules.
> SELinux: 8 users, 12 roles, 2347 types, 115 bools, 1 sens, 1024 cats
> SELinux: 72 classes, 171021 rules
> SELinux: permission open in class dir not defined in policy
> SELinux: permission open in class file not defined in policy
> SELinux: permission open in class chr_file not defined in policy
> SELinux: permission open in class blk_file not defined in policy
> SELinux: permission open in class fifo_file not defined in policy
> SELinux: the above unknown classes and permissions will be allowed
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev sda5, type ext3), uses xattr
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> type=1403 audit(1216436786.249:3): policy loaded auid=4294967295 ses=4294967295
> usb usb2: uevent
> usb 2-0:1.0: uevent
> usb 2-2: uevent
> usb 2-2:1.0: uevent
> usb 2-2:1.1: uevent
> usb 2-2:1.2: uevent
> usb usb3: uevent
> usb 3-0:1.0: uevent
> usb usb4: uevent
> usb 4-0:1.0: uevent
> usb 4-2: uevent
> usb 4-2:1.0: uevent
> usb usb5: uevent
> usb 5-0:1.0: uevent
> usb 5-1: uevent
> usb 5-1:1.0: uevent
> usb 5-1:1.1: uevent
> usb usb1: uevent
> usb 1-0:1.0: uevent
> usb 1-4: uevent
> usb 1-4:1.0: uevent
> appletouch 2-2:1.1: usb_probe_interface
> appletouch 2-2:1.1: usb_probe_interface - got id
> appletouch: Geyser mode initialized.
> input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9
> usbcore: registered new interface driver appletouch
> intel_rng: FWH not detected
> iTCO_vendor_support: vendor-support=0
> ath5k_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:03:00.0 to 64
> ath5k_pci 0000:03:00.0: registered as 'phy0'
> ath5k phy0: Device not yet supported.
> ath5k_pci 0000:03:00.0: PCI INT A disabled
> ACPI: AC Adapter [ADP1] (on-line)
> ath_hal: module license 'Proprietary' taints kernel.
> AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
> ACPI: Battery Slot [BAT0] (battery present)
> Driver 'sr' needs updating - please use bus_type methods
> sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 0:0:0:0: Attached scsi CD-ROM sr0
> input: PC Speaker as /devices/platform/pcspkr/input/input10
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
> iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
> ACPI: Device needs an ACPI driver
> isight_firmware 1-4:1.0: usb_probe_interface
> isight_firmware 1-4:1.0: usb_probe_interface - got id
> firmware: requesting isight.fw
> input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input11
> ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> sky2 0000:02:00.0: v1.21 addr 0xd8200000 irq 16 Yukon-EC (0xb6) rev 2
> sky2 eth0: addr 00:17:f2:d1:e0:6f
> Unable to load isight firmware
> usbcore: registered new interface driver isight_firmware
> firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
> firewire_core: created device fw0: GUID 0019e3fffe6e4c54, S800
> ath_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:03:00.0 to 64
> MadWifi: ath_attach: Switching rfkill capability off.
> wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
> ath_pci: wifi0: Atheros 5418: mem=0xd8100000, irq=17
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> [drm] Initialized drm 1.1.0 20060810
> pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:01:00.0 to 64
> [drm] Initialized radeon 1.29.0 20080528 on minor 0
> [drm] Setting GART location based on new memory map
> [drm] Loading R500 Microcode
> [drm] Num pipes: 1
> [drm] writeback test succeeded in 1 usecs
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> appletouch: incomplete data package (first byte: 2, length: 4).
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
> device-mapper: multipath: version 1.0.5 loaded
> EXT3 FS on sda5, internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev sda3, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> Adding 2047992k swap on /dev/sda4. Priority:-1 extents:1 across:2047992k
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
> IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
> firmware: requesting intel-ucode/06-0f-06
> firmware: requesting intel-ucode/06-0f-06
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> ip_tables: (C) 2000-2006 Netfilter Core Team
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
> warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
> fuse init (API version 7.9)
> SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
> usb usb3: usb auto-resume
> usb usb3: wakeup_rh
> hub 3-0:1.0: hub_resume
> hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
> usb usb3: suspend_rh (auto-stop)
> uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us
> uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us
> hub 3-0:1.0: hub_suspend
> usb usb3: bus auto-suspend
> usb usb3: suspend_rh
> Bluetooth: Core ver 2.11
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP ver 2.9
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM ver 1.8
> Bluetooth: BNEP (Ethernet Emulation) ver 1.2
> Bluetooth: BNEP filters: protocol multicast
> Bridge firewalling registered
> pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
> uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> [drm] Num pipes: 1
> [drm] Setting GART location based on new memory map
> [drm] Loading R500 Microcode
> [drm] Num pipes: 1
> [drm] writeback test succeeded in 1 usecs
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> ath0: no IPv6 routers present
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 0 1
> domain 1: span 0-1 level NODE
> groups: 0-1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 1 0
> domain 1: span 0-1 level NODE
> groups: 0-1
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 0 1
> domain 1: span 0-1 level NODE
> groups: 0-1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 1 0
> domain 1: span 0-1 level NODE
> groups: 0-1
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
> uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
>
>
>
>
>
>
> On Fri, Jul 18, 2008 at 06:22:08PM -0700, Yinghai Lu wrote:
>> On Fri, Jul 18, 2008 at 5:58 PM, Jack Howarth <howarth@xxxxxxxxxxxxxxxxx> wrote:
>> > YH,
>> > The patch you posted did not apply cleanly to tonight's or last night's linus kernel git.
>> > I had to correct it by hand and this is what I applied...
>>
>> it should apply cleanly to linus tree too.
>>
>> please check the patch i sent out before and addon fix patch
>>
>> YH
>
>> [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved
>>
>> for MacBookPro2
>>
>> change the mconf bus range from [0,0xff] to to [0, 0x3f]
>> to match range [0xf0000000, 0xf4000000) in e820 tables.
>>
>> Signed-off-by: Yinghai Lu <yhlu.kernel@xxxxxxxxx>
>>
>> ---
>> arch/x86/pci/mmconfig-shared.c | 64 ++++++++++++++++++++++++++++++-----------
>> 1 file changed, 47 insertions(+), 17 deletions(-)
>>
>> Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
>> ===================================================================
>> --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
>> +++ linux-2.6/arch/x86/pci/mmconfig-shared.c
>> @@ -293,7 +293,7 @@ static acpi_status __init find_mboard_re
>> return AE_OK;
>> }
>>
>> -static int __init is_acpi_reserved(unsigned long start, unsigned long end)
>> +static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
>> {
>> struct resource mcfg_res;
>>
>> @@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsig
>> return mcfg_res.flags;
>> }
>>
>> +typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
>> +
>> +static int __init is_mmconf_reserved(check_reserved_t is_reserved,
>> + u64 addr, u64 size, int i,
>> + typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
>> +{
>> + u64 old_size = size;
>> + int valid = 0;
>> +
>> + while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
>> + size >>= 1;
>> + if (size < (16UL<<20))
>> + break;
>> + }
>> +
>> + if (size >= (16UL<<20) || size == old_size) {
>> + printk(KERN_NOTICE
>> + "PCI: MCFG area at %Lx reserved in %s\n",
>> + addr, with_e820?"E820":"ACPI motherboard resources");
>> + valid = 1;
>> +
>> + if (old_size != size) {
>> + /* update end_bus_number */
>> + cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
>> + printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
>> + "segment %hu buses %u - %u\n",
>> + i, (unsigned long)cfg->address, cfg->pci_segment,
>> + (unsigned int)cfg->start_bus_number,
>> + (unsigned int)cfg->end_bus_number);
>> + }
>> + }
>> +
>> + return valid;
>> +}
>> +
>> static void __init pci_mmcfg_reject_broken(int early)
>> {
>> typeof(pci_mmcfg_config[0]) *cfg;
>> @@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_brok
>>
>> for (i = 0; i < pci_mmcfg_config_num; i++) {
>> int valid = 0;
>> - u32 size = (cfg->end_bus_number + 1) << 20;
>> + u64 addr, size;
>> +
>> cfg = &pci_mmcfg_config[i];
>> + addr = cfg->start_bus_number;
>> + addr <<= 20;
>> + size = cfg->end_bus_number + 1 - cfg->start_bus_number;
>> + size <<= 20;
>> printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
>> "segment %hu buses %u - %u\n",
>> i, (unsigned long)cfg->address, cfg->pci_segment,
>> (unsigned int)cfg->start_bus_number,
>> (unsigned int)cfg->end_bus_number);
>>
>> - if (!early &&
>> - is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
>> - printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
>> - "in ACPI motherboard resources\n",
>> - cfg->address);
>> - valid = 1;
>> - }
>> + if (!early)
>> + valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
>>
>> if (valid)
>> continue;
>> @@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_brok
>> printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
>> " reserved in ACPI motherboard resources\n",
>> cfg->address);
>> +
>> /* Don't try to do this check unless configuration
>> type 1 is available. how about type 2 ?*/
>> - if (raw_pci_ops && e820_all_mapped(cfg->address,
>> - cfg->address + size - 1,
>> - E820_RESERVED)) {
>> - printk(KERN_NOTICE
>> - "PCI: MCFG area at %Lx reserved in E820\n",
>> - cfg->address);
>> - valid = 1;
>> - }
>> + if (raw_pci_ops)
>> + valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
>>
>> if (!valid)
>> goto reject;
>
>> [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved
>>
>> Signed-off-by: Yinghai Lu <yhlu.kernel@xxxxxxxxx>
>>
>> diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
>> index 9297882..429c701 100644
>> --- a/arch/x86/pci/mmconfig-shared.c
>> +++ b/arch/x86/pci/mmconfig-shared.c
>> @@ -364,6 +364,7 @@ static void __init pci_mmcfg_reject_broken(int early)
>> cfg = &pci_mmcfg_config[i];
>> addr = cfg->start_bus_number;
>> addr <<= 20;
>> + addr += cfg->address;
>> size = cfg->end_bus_number + 1 - cfg->start_bus_number;
>> size <<= 20;
>> printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

Sorry to jump in; I just sent a post:
this is happening with the macbook pro ati chipset as well.
just did a reinstall, and am confronted with this.
regards;

--
Justin P. Mattock
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Arjan van de Ven: "Re: [patch 1/3] fastboot: Create a "asynchronous" initlevel"
Previous message: Justin Mattock: "macbook2,2 latest git mmconfig issues"
In reply to: Jack Howarth: "Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf"
Next in thread: Yinghai Lu: "Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]