Re: [PATCH] ide-floppy fix

From: Bartlomiej Zolnierkiewicz
Date: Tue Jul 15 2008 - 12:57:32 EST



Hi,

On Tuesday 15 July 2008, Borislav Petkov wrote:

[...]

> On a different note, the current pata tree on top of v2.6.25-2125-g50515af blows
> up here with the following error:
>
> [ 4.296729] Uniform Multi-Platform E-IDE driver
> [ 4.297905] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at PCI slot 0000:00:1f.1
> [ 4.297986] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> [ 4.298153] ICH4: not 100% native mode: will probe irqs later
> [ 4.298213] ide0: BM-DMA at 0xfc00-0xfc07
> [ 4.298282] ide1: BM-DMA at 0xfc08-0xfc0f
> [ 4.561768] hda: QUANTUM FIREBALLlct10 20, ATA DISK drive
> [ 4.816724] hdb: SAMSUNG SP2014N, ATA DISK drive
> [ 4.867959] hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33
> [ 4.868027] hda: UDMA/33 mode selected
> [ 4.868441] hdb: UDMA/100 mode selected
> [ 5.540683] hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
> [ 5.795564] hdd: IC35L120AVV207-0, ATA DISK drive
> [ 5.847295] hdd: host side 80-wire cable detection failed, limiting max speed to UDMA33
> [ 5.847362] hdd: UDMA/33 mode selected
> [ 5.847715] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 5.855487] ide1 at 0x170-0x177,0x376 on irq 15
> [ 5.875927] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> [ 5.876012] ide_generic: I/O resource 0x1F0-0x1F7 not free.
> [ 5.876074] ide_generic: I/O resource 0x170-0x177 not free.
> [ 11.342504] hde: no response (status = 0xa1), resetting drive
> [ 17.206535] hdf: no response (status = 0xa1), resetting drive

hde? hdf?

[...]

> I tracked the error down to the call to ide_register_port(hwif) in
> ide-probe.c:ide_host_register() which does device_register(&hwif->gendev) and
> the hwif->gendev->kobj seems unitialized thus the WARN_ON on its refcount in
> kref_get(). Will look into it more when i get some free time.

Unfortunately I couldn't reproduce this problem here (2.6.26 + pata tree)
so please try to debug it and/or narrow it down to the guilty change.

> --
> From: Borislav Petkov <petkovbb@xxxxxxxxx>
>
> Check the correct flags-location for set features.
>
> Signed-off-by: Borislav Petkov <petkovbb@xxxxxxxxx>

Thanks, I folded the fix into original patch (->dev_flags is not yet
upstream so -stable fix shouldn't be necessary).

While on it: I later noticed that there will be also need for common
ATA/ATAPI ->dev_flags in the future so I wonder whether current
->dev_flags should be renamed to ->atapi_flags (& s/*DFLAG*/*AFLAG*/).

If there is agreement on this I'll fix it in pata tree.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/