Re: NIU - Sun Neptune 10g - Transmit timed out reset (2.6.24)

[Matheos Worku]

Jesper Krogh wrote:

> Matheos Worku wrote:
>
> > Jesper Krogh wrote:
> >
> > > David Miller wrote:
> > >
> > > > From: Jesper Krogh <jesper@xxxxxxxx>
> > > > Date: Fri, 09 May 2008 20:32:53 +0200
> > > >
> > > > > When it works I doesnt seem to be able to get it pass 500MB/s.
> > > >
> > > >
> > > > With this card you really need multiple cpus and multiple threads
> > > > sending data through the card in order to fill the 10Gb pipe.
> > > >
> > > > Single connections will not fill the pipe.
> > >
> > >
> > > The server is a Sun X4600 with 8 x dual-core CPU's, setup with 64
> > > NFS-threads. The other end of the fiber goes into a switch with gigabit
> > > ports connected to 48 dual-core cpus. The test was done doing a dd on a
> > > 4.5GB file from the server to /dev/null on the clients.
> >
> >
> > Are you doing a TX or RX (with respect to the 10G if)?
>
>
> Thats a transmit.. from the NFS server to the clients.

I have observed TX throughput degradation (and increased CPU 
utilization)  occurs with increased # of connections, when CPU count > 4 
CPUs.  I don't think it is related to the driver (or HW). A while ago I 
prototyped a driver which drops all UDP TX packets and the throughput 
degradation (and CPU utilization increase) behavior occurred though the 
driver was not doing much work.   LSO/TSO seems to help with the 
situation though. With LSO disabled, I have observed the issue on 
several 10G nics.

Regards
Matheos


> Jesper


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/