[PATCH] Colibri: Fix support for DM9000 ethernet device.

[Michael Abbott]

From: Michael Abbott <michael.abbott@xxxxxxxxxxxxx>

Colibri: Fix support for DM9000 ethernet device.

Two changes are necessary to enable proper operation of the DM9000 device
with the Colibri PXA 270 board: firstly, the IRQ type needs to be
configured for rising edge interrupts, and secondly this configuration needs
to be communicated through to the DM9000.

Signed-off-by: Michael Abbott <michael.abbott@xxxxxxxxxxxxx>
---
 arch/arm/mach-pxa/colibri.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

Patch applied against v2.6.25

Proper operation of this device also depends on the DM9000 timer patch 
submitted separately.

diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 6db54e3..a76f95a 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -97,7 +97,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= COLIBRI_ETH_IRQ,
 		.end	= COLIBRI_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };

@@ -118,7 +118,7 @@ static void __init colibri_init(void)
 	/* DM9000 LAN */
 	pxa_gpio_mode(GPIO78_nCS_2_MD);
 	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-	set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
+	set_irq_type(COLIBRI_ETH_IRQ, IRQT_RISING);

 	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }
--
1.5.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/