[PATCH] DM9000: Restore MII physical polling timer.

[Michael Abbott]

From: Michael Abbott <michael.abbott@xxxxxxxxxxxxx>

DM9000: Restore MII physical polling timer.

In commit fcfa81aa3e8d885356139122fcb281487b983468 the timer for polling the
MII physical layer was removed because of conflicts with newly added mutexes.
Unfortunately a side effect of this change is that the corresponding ethernet
layer is permanently reported as down: there is no other way to read the link
status.

This commit restores the timer, but uses the default work queue for polling.

Signed-off-by: Michael Abbott <michael.abbott@xxxxxxxxxxxxx>
---
 drivers/net/dm9000.c |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)

This patch is against 2.6.25, and has been tested with the Colibri PXA270 
board (patch follows separately).

diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index d63cc93..9ad9499 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -43,6 +43,7 @@
 /* Board/System/Debug information/definition ---------------- */

 #define DM9000_PHY		0x40	/* PHY address 0x01 */
+#define DM9000_TIMER_WUT	(HZ*2)	/* timer wakeup time : 2 second */

 #define CARDNAME "dm9000"
 #define PFX CARDNAME ": "
@@ -117,6 +118,8 @@ typedef struct board_info {

 	struct mutex	 addr_lock;	/* phy and eeprom access lock */

+	struct delayed_work timer;	/* Interface status timer. */
+
 	spinlock_t lock;

 	struct mii_if_info mii;
@@ -144,6 +147,7 @@ static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
 static int dm9000_stop(struct net_device *);
 static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd);

+static void dm9000_timer(struct work_struct * work);
 static void dm9000_init_dm9000(struct net_device *);

 static irqreturn_t dm9000_interrupt(int, void *);
@@ -762,6 +766,10 @@ dm9000_open(struct net_device *dev)
 	mii_check_media(&db->mii, netif_msg_link(db), 1);
 	netif_start_queue(dev);

+	/* Start the media status timer running. */
+	INIT_DELAYED_WORK(&db->timer, dm9000_timer);
+	schedule_delayed_work(&db->timer, DM9000_TIMER_WUT);
+
 	return 0;
 }

@@ -876,6 +884,9 @@ dm9000_stop(struct net_device *ndev)
 {
 	board_info_t *db = (board_info_t *) ndev->priv;

+	/* Delete the timer and make sure it's not running right now! */
+	cancel_delayed_work_sync(&db->timer);
+
 	if (netif_msg_ifdown(db))
 		dev_dbg(db->dev, "shutting down %s\n", ndev->name);

@@ -965,6 +976,16 @@ dm9000_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }

+
+/* Two second timer to poll the media status -- the DM9000 doesn't provide a
+ * status interrupt, so this has to be polled. */
+static void dm9000_timer(struct work_struct * work)
+{
+	board_info_t *db = container_of(work, board_info_t, timer);
+	mii_check_media(&db->mii, netif_msg_link(db), 0);
+	schedule_delayed_work(&db->timer, DM9000_TIMER_WUT);
+}
+
 struct dm9000_rxhdr {
 	u8	RxPktReady;
 	u8	RxStatus;
--
1.5.5

--
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html