Re: 2.6.25-rc2 System no longer powers off after suspend-to-disk.Screen becomes green.

[Nigel Cunningham]

Hi Greg.

Greg KH wrote:
> On Thu, Feb 21, 2008 at 12:17:06PM +1100, Nigel Cunningham wrote:
> > Hi.
> >
> > Greg KH wrote:
> > > On Thu, Feb 21, 2008 at 11:40:06AM +1100, Nigel Cunningham wrote:
> > > > Hi.
> > > >
> > > > Matthew Garrett wrote:
> > > > > On Thu, Feb 21, 2008 at 09:45:02AM +1100, Nigel Cunningham wrote:
> > > > > > - people keep talking about hibernating to an ext3 fs mounted on fuse 
> > > > > > as a limitation of the freezer. To do that with kexec, you're still 
> > > > > > going to have to bmap the ext3 fs and pass the block list (in which 
> > > > > > case we can also do it without kexec) or umount all the ext3/fuse part 
> > > > > > and remount in the kexec'd kernel. Sort of defeats the purpose, doesn't 
> > > > > > it?
> > > > > No, with a freezer-based model you can basically *never* suspend to 
> > > > > anything related to FUSE or a userspace USB device or anything involving 
> > > > > userspace iSCSI initiators or whatever. Sure, there are cases where 
> > > > > moving away from the current model doesn't buy you anything, but that 
> > > > > doesn't mean that the current model is a good thing. It's not. The 
> > > > > freezer is a fundamentally broken concept.
> > > > Putting drivers and filesystems in userspace is the fundamentally broken 
> > > > concept. Not just when it comes to the freezer. The whole idea is 
> > > > inherently racy.
> > > Racy with regards to other things becides trying to suspend a machine?
> > > If so, what?
> > That depends on what sort of tangled web you want to weave.
>
> Lots of them :)
>
> We have tanks running Linux using userspace USB drivers for vision
> control systems (scary, I know...)  They seem to be successfully running
> for many years now, and I'm interested in making sure those kinds of
> things keep working.
>
> We also have laser welding robots with userspace PCI drivers in car
> manufacturing plants.  And other laser cutting robots slicing wood in
> patterns moving at a rate of over 3 meters a second.  Again, with
> userspace drivers and Linux.
>
> Those users would also love to know of any potential problems you know
> of for this situation.
>
> > Low memory situations is one other situation that occurs to me
> > quickly, especially (though not only) if your ability to swap were to
> > depend upon a userspace driver and/or filesystem.
>
> Sure, swap over a userspace filesystem or driver isn't a sane idea.  And
> neither is swaping over NFS over a PPP connection attached to a USB to
> serial device.  Yes, it's possible, and all in the kernel, but not a
> wise decision.
>
> Other than foolish configurations, if you come up with other issues
> surrounding userspace drivers that could cause problems, please let me
> know.

A simple OOM condition isn't an issue? Surely a driver stalling because 
some of its memory gets swapped out just before it goes to use it would 
be a problem if it resulted in getting the length of a cut wrong or 
caused some distorted vision or a late turn :>

Am I missing something? Maybe these drivers mlock memory to avoid those 
issues or something like that?

Regards,

Nigel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/