Re: [RFC] pata_icside driver

[Russell King]

On Mon, Apr 09, 2007 at 11:25:06AM +0100, Alan Cox wrote:
> > When you quantise those figures using a clock period of 62.5ns (16MHz)
> > you end up with: 2 clocks active (2*62.5 > 70), 1 clock recovery
> > (1*62.5 > 25) and 2 clocks cycle (2*62.5 > 120).
> > 
> > Last time I checked, active + recovery must always be equal to the cycle
> > time, and unless my math is failing me, 2 + 1 does not equal 2.
> 
> The libata code does the following:
> 
>         if (t->active + t->recover < t->cycle) {
>                 t->active += (t->cycle - (t->active + t->recover)) / 2;
>                 t->recover = t->cycle - t->active;
>         }
> 
> which probably means for 16MHz you don't have enough resolution to be sure
> you'll error in this direction in all cases. If so you just need to try
> adding
> 
> 	if (t->active + t->recover > t->cycle)
> 		t->cycle = t->active + t->recover
> 
> to stretch the cycle time to fit the resolution as well.
> 
> And we should get this tested/fixed by someone seeing the problem, before
> and instead of putting hacks/notes in drivers that may then get lost

I agree; this is why I sent the patch out as an RFC before wanting it
merged.  My feeling at the time when I wrote this is it's something that
the libata timing calculation code should already be catering for.

I should've explicitly mentioned that in the comments, but forgot.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/