[PATCH UPDATED] fix typo in drivers/block/Kconfig

From: Patrick Ringl
Date: Sat Mar 24 2007 - 21:40:01 EST


Hello,

[ ... Fixed two minor typos. ...]

The following patch is against 2.6.21-rc4:


--- linux-2.6.20-o/drivers/block/Kconfig 2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig 2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
default "16"
depends on BLK_DEV_RAM
help
- The default value is 16 RAM disks. Change this if you know what
+ The default value is 16 RAM disks. Change this if you know what you
are doing. If you boot from a filesystem that needs to be extracted
in memory, you will need at least one RAM disk (e.g. root on cramfs).

@@ -393,7 +393,7 @@
default "4096"
help
The default value is 4096 kilobytes. Only change this if you know
- what are you doing. If you are using IBM S/390, then set this to
+ what you are doing. If you are using IBM S/390, then set this to
8192.

config BLK_DEV_RAM_BLOCKSIZE




---

regards,
Patrick




--- linux-2.6.20-o/drivers/block/Kconfig 2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig 2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
default "16"
depends on BLK_DEV_RAM
help
- The default value is 16 RAM disks. Change this if you know what
+ The default value is 16 RAM disks. Change this if you know what you
are doing. If you boot from a filesystem that needs to be extracted
in memory, you will need at least one RAM disk (e.g. root on cramfs).

@@ -393,7 +393,7 @@
default "4096"
help
The default value is 4096 kilobytes. Only change this if you know
- what are you doing. If you are using IBM S/390, then set this to
+ what you are doing. If you are using IBM S/390, then set this to
8192.

config BLK_DEV_RAM_BLOCKSIZE